<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">If you check the rate-o-mat log it should tell you what the reason for this is. <div>Most likely the rates you have created don’t match the number in the CDR. <div>Rate-o-mat logs are stored in /var/log/ngcp/</div><div><br></div><div>It will tell you in this log file what the number is so you can correct your billing fee. <br><br><div dir="ltr">Best Regards<div>Leighton Brennan</div></div><div dir="ltr"><br><blockquote type="cite">On 8 May 2022, at 20:28, Edo <edo.ekunwe@gmail.com> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"><div dir="ltr">Thanks Matthias,<div><br></div><div>I have set up the billing profile, billing network and added the rates to it. However, I cannot get it to actually bill against a call. </div><div><br></div><div>I have a subscriber that is under a reseller and domain, the reseller has a contact, billing profile and contract. When I make calls from the subscriber, I route the calls through a peer (I would also like to bill peers as well). After the call is complete, when I check the CDR, I see the calls but the cost of the call is always showing 0.00. My problem is how to tie the rate to the subscriber or peer as needed so that the balance on the reseller/subscriber can be reduced based on the calls completed.</div><div><br></div><div>Thoughts?</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, May 8, 2022 at 11:00 AM <<a href="mailto:spce-user-request@lists.sipwise.com">spce-user-request@lists.sipwise.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Send Spce-user mailing list submissions to<br>
<a href="mailto:spce-user@lists.sipwise.com" target="_blank">spce-user@lists.sipwise.com</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com" rel="noreferrer" target="_blank">http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:spce-user-request@lists.sipwise.com" target="_blank">spce-user-request@lists.sipwise.com</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:spce-user-owner@lists.sipwise.com" target="_blank">spce-user-owner@lists.sipwise.com</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of Spce-user digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Help with Setting up Billing on CE (Edo)<br>
2. Re: Help with Setting up Billing on CE (Matthias Hohl)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Sun, 8 May 2022 00:37:12 -0500<br>
From: Edo <<a href="mailto:edo.ekunwe@gmail.com" target="_blank">edo.ekunwe@gmail.com</a>><br>
To: <a href="mailto:spce-user@lists.sipwise.com" target="_blank">spce-user@lists.sipwise.com</a><br>
Subject: [Spce-user] Help with Setting up Billing on CE<br>
Message-ID:<br>
<CAFkRdGvQxoPO-LQRij9FE9G_EFyuWD4ynXj=<a href="mailto:6%2BvinBNo_3oDaQ@mail.gmail.com" target="_blank">6+vinBNo_3oDaQ@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hi All,<br>
<br>
I have been fumbling with setting up billing on sipwise CE and have been<br>
unsuccessful.<br>
<br>
Please can someone mentor me? The documentation is not very clear as to how<br>
to actually achieve this.<br>
<br>
Thanks<br>
<br>
-- <br>
-----<br>
Ekunwe<br>
Tel: 601.497.3932<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220508/41e9cd3f/attachment-0001.html" rel="noreferrer" target="_blank">http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220508/41e9cd3f/attachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sun, 8 May 2022 17:14:12 +0200 (CEST)<br>
From: Matthias Hohl <<a href="mailto:matthias.hohl@telematica.at" target="_blank">matthias.hohl@telematica.at</a>><br>
To: 'Edo' <<a href="mailto:edo.ekunwe@gmail.com" target="_blank">edo.ekunwe@gmail.com</a>>, <a href="mailto:spce-user@lists.sipwise.com" target="_blank">spce-user@lists.sipwise.com</a><br>
Subject: Re: [Spce-user] Help with Setting up Billing on CE<br>
Message-ID: <1585704095.1958400.1652022852261.JavaMail.zimbra@mx><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Ifyou could descripe me in detail where you need some help, I could try if I can help you ?<br>
<br>
<br>
<br>
Normally it is very simple.<br>
<br>
Create a Billing Profile via the GUI and upload your billing profile entries via CSV file.<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
Von: Edo <<a href="mailto:edo.ekunwe@gmail.com" target="_blank">edo.ekunwe@gmail.com</a>> <br>
Gesendet: Sonntag, 8. Mai 2022 07:37<br>
An: <a href="mailto:spce-user@lists.sipwise.com" target="_blank">spce-user@lists.sipwise.com</a><br>
Betreff: [Spce-user] Help with Setting up Billing on CE<br>
<br>
<br>
<br>
Hi All,<br>
<br>
<br>
<br>
I have been fumbling with setting up billing on sipwise CE and have been unsuccessful.<br>
<br>
<br>
<br>
Please can someone mentor me? The documentation is not very clear as to how to actually achieve this.<br>
<br>
<br>
<br>
Thanks<br>
<br>
<br>
<br>
<br>
-- <br>
<br>
-----<br>
<br>
Ekunwe<br>
Tel: 601.497.3932<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220508/9edf7b59/attachment-0001.html" rel="noreferrer" target="_blank">http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220508/9edf7b59/attachment-0001.html</a>><br>
-------------- next part --------------<br>
A non-text attachment was scrubbed...<br>
Name: smime.p7s<br>
Type: application/pkcs7-signature<br>
Size: 5022 bytes<br>
Desc: not available<br>
URL: <<a href="http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220508/9edf7b59/attachment-0001.p7s" rel="noreferrer" target="_blank">http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220508/9edf7b59/attachment-0001.p7s</a>><br>
<br>
------------------------------<br>
<br>
Subject: Digest Footer<br>
<br>
Spce-user mailing list<br>
<a href="mailto:Spce-user@lists.sipwise.com" target="_blank">Spce-user@lists.sipwise.com</a><br>
<a href="http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com" rel="noreferrer" target="_blank">http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com</a><br>
<br>
<br>
------------------------------<br>
<br>
End of Spce-user Digest, Vol 35, Issue 4<br>
****************************************<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div>-----</div>Ekunwe<br>EDO Network Services, Inc.<br>Tel: 601.497.3932<br>Fax: 601.979.5931</div>
<span>-- </span><br><span>Spce-user mailing list</span><br><span>Spce-user@lists.sipwise.com</span><br><span>http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com</span><br></div></blockquote></div></div></body></html>