<div dir="ltr">Hello,<br><br>I\u2019m currently configuring TLS on Sipwise CE 7.5.10 (I\u2019m aware this is a slightly older version) and I\u2019m encountering some issues. The goal is to enable both inbound and outbound calls using TLS and SRTP.<br><br>I have already configured and enabled the TLS section in the config.yml file, along with valid certificates successfully loaded. In fact, on one endpoint, once I added the CA certificates, I was able to register with Sipwise over TLS without any problems.<br><br>On the other hand, I have a carrier that supports these protocols. However, when I try to place a call from this endpoint, I see that the INVITEs are correctly arriving on port 5061. But when Sipwise processes the call, SEMS (port 5080) attempts to internally forward it to the lb over port 5060. I believe this might not be correct, although I could be mistaken. As a result, the call never reaches the carrier and remains stuck in Kamailio.<br><br>Do you have any ideas or suggestions? Could I be missing an additional configuration step?<div><br></div><div>Best regards</div></div>