[Spce-user] SIP trunk to PBX

John Murray john.murray at skyracktelecom.com
Tue Aug 7 18:27:35 EDT 2012


Sorry Jon,

What I mean is I do not know the IP address of the PBX until it registers (it is on a broadband line with an IP address that can vary) so I cannot create permanent contacts to it.
So can I create permanent contacts for those users pointing to the registering user, which then registers and gets an IP address?

Regards

John 

-----Original Message-----
From: spce-user-bounces at lists.sipwise.com [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Jon Bonilla (Manwe)
Sent: 07 August 2012 21:46
To: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] SIP trunk to PBX

El Tue, 7 Aug 2012 20:17:36 +0100
"John Murray" <john.murray at skyracktelecom.com> escribió:

> Hi,
> 
>  
> 
> I want to deliver a SIP trunk to a PBX with 100 users. I would like to 
> give some extra services to some of the users on the PBX such as call 
> forward no answer, voicemail, etc.
> 
> The PBX can only register, but only once for the whole system.
> 
>  
> 
> Should I set up a subscriber for the 'pilot user' of the PBX so the 
> PBX can register and put all the DDIs of the non extra service users 
> on this subscriber.
> 
> Should I then add subscribers for the extra service users with voicmail etc.
> and add a permanent contact for those subscribers of the pilot user's 
> SIP URI?
> 
>  

There's no difference if you register once for one subscriber or you do not register at all. You can use permanent contacts for all your subscribers.






_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
http://lists.sipwise.com/listinfo/spce-user





More information about the Spce-user mailing list