[Spce-user] Authentication

[John Murray]

Wow, this is great. So if I have multiple subscribers on the MVNO matching subscribers in the SPCE could I have multiple entries with the same src_ip the From: field that the MVNO sends for that user and the UUID of the subscriber in SPCE that it should match?

-----Original Message-----
From: spce-user-bounces at lists.sipwise.com [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Andreas Granig
Sent: 09 July 2012 19:45
To: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Authentication

Hi John,

You need to put the subscriber's UUID into the "tag" column.

This stuff isn't really documented anywhere because it was just an internal feature for testing, however as Jon said the upcoming v2.6 exposes this feature to the admin panel, so no manual hacking is required anymore then.

Andreas

On 07/09/2012 08:21 PM, John Murray wrote:
> Jon hi,
> 
> This is great and adding the host as trusted works.
> 
> How does the SPCE match the incoming INVITE to a local user if they have not registered?
> For outbound I set a permanent contact but for inbound INVITEs which fields match which subscriber information to identify a subscriber as local.
> 
> Regards
> 
> John
> 
> -----Original Message-----
> From: spce-user-bounces at lists.sipwise.com 
> [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Jon Bonilla 
> (Manwe)
> Sent: 09 July 2012 18:01
> To: spce-user at lists.sipwise.com
> Subject: Re: [Spce-user] Authentication
> 
> El Mon, 9 Jul 2012 17:43:36 +0100
> "John Murray" <john.murray at skyracktelecom.com> escribió:
> 
>> Hello,
>>
>>  
>>
>> I have mobile MVNO service which I want to connect the mobile 
>> handsets via SIP to the SPCE as endpoints to give voicemail, call 
>> forwarding, etc services to.
>>
>> All calls made by the Handset are routed to me via SIP and I can call 
>> the handset via SIP.
>>
>> As I want to give each user their own settings and voice mailbox etc. 
>> I set each user as a subscriber with a fixed contact of the ip 
>> address of the MVNO.
>>
>>  
>>
>> This works however the MVNO does not REGISTER and when an INVITE call 
>> is received from the MVNO the SPCE sees this as a user with endpoint 
>> and wants to authenticate but the MVNO cannot do this.
>>
>>  
>>
>> Is there a way to authenticate endpoints on ip address or do I have 
>> to disable authentication for the whole system?
>>
>>  
> 
> 
> Hi John
> 
> The permanent location is for endpoints that can't register but they still need to authenticate.
> 
> 
> For clients that won't authenticate, we need to set "Trusted-Sources". This has already been implemented in trunk and will be present in 2.6 release.
> 
> 
> Meanwhile you can either disable authentication, or customize your installation by playing with kamailio.trusted table, or wait for 2.6,  or you could buy a 2.6trunk based PRO system which would receive regular updates until we release the stable version.  
> 
> 
> 
> cheers,
> 
> Jon
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
>