[Spce-user] Kamalio lb and/or proxy not starting after reboot

[Andrew Pogrebennyk]

Hi Akhil,
thanks. I'm wondering how did the lo interface disappear from the
/etc/network/interfaces file, anyway please add the following two lines:

auto lo
iface lo inet loopback

This should solve your problem.

On 05/18/2012 06:34 PM, Akhil Chandra wrote:
> Hi Andrew,
> 
> Here is the ifconfig -a
> root at voip:~# ifconfig -a
> eth0      Link encap:Ethernet  HWaddr 00:15:c5:e1:1d:54
>           inet addr:207.145.55.147  Bcast:207.145.55.151
> Mask:255.255.255.248
>           inet6 addr: fe80::215:c5ff:fee1:1d54/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:53468 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:51036 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:14273139 (13.6 MiB)  TX bytes:16310127 (15.5 MiB)
>           Interrupt:16
> 
> eth1      Link encap:Ethernet  HWaddr 00:15:c5:e1:1d:55
>           BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>           Interrupt:17
> 
> lo        Link encap:Local Loopback
>           LOOPBACK  MTU:16436  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
> 
> Also, here is the /etc/network/interfaces files
> 
> root at voip:~# cat /etc/network/interfaces
> # This file describes the network interfaces available on your system
> # and how to activate them. For more information, see interfaces(5).
> 
> auto eth0
> iface eth0 inet static
>         address 207.145.55.147
>         netmask 255.255.255.248
>         gateway 207.145.55.145
>         dns-nameservers 208.67.222.222
> iface eth1 inet static
>         address 192.168.1.90
>         netmask 255.255.255.0
>         gateway 192.168.1.1
> 
> Regards,
> Akhil
>