[Spce-user] Outbound time out

Wed Nov 14 12:44:20 EST 2012

So here's what you can do to get everything needed into my mailbox quick
and easy :)

sudo ngrep-sip b -d any -qt -W byline > /tmp/live-ngrep-cap &
sudo tail -f /var/log/ngcp/kamailio-proxy.log > /tmp/live-proxy-log
 --perform test call--
Ctrl+c (to kill the tail process)
fg 1
Ctrl+c (to kill the ngrep process)
cd /tmp
(uuencode live-ngrep-cap live-ngrep-cap.txt && uuencode live-proxy-log
live-proxy-log.txt) | mail -s "[Spce-user] Files you requested"
skchopperguy at gmail.com

On Wed, Nov 14, 2012 at 9:09 AM, Jeremie Chism <jchism2 at gmail.com> wrote:

> I saw that to. I'm getting everything that you needed instead of what I
> sent you. Sorry.
>
> Sent from my iPhone
>
> On Nov 14, 2012, at 10:59 AM, Skyler <skchopperguy at gmail.com> wrote:
>
> You see the INFO: <script>: New request - M=BYE R=sip:127.0.0.1:5080
>
> At some point before this your box is sending replies to itself instead of
> to your subscriber. I'm trying to figure out what is happening before the
> new request and why. One way is to see the entire log of the call and not
> just the end of the call.
>
> S.
>
> On Wed, Nov 14, 2012 at 8:41 AM, Jeremie Chism <jchism2 at gmail.com> wrote:
>
>> after looking into it more, I dont think that is what you need.  I see
>> two Call ID's in the call example i sent in the prior email.  I thought the
>> call ID toward the end would be the same throughout the entire call.
>>
>>
>> On Wed, Nov 14, 2012 at 10:14 AM, Skyler <skchopperguy at gmail.com> wrote:
>>
>>> ok, well it is definitely your box which is not replying to upstream.
>>> Then the upstream timer is likely reached so they BYE you.
>>>
>>> I need a matching ngrep with proxy log. In case you don't know what I
>>> mean..
>>>
>>> sudo ngrep-sip b -d any -qt -W byline > /tmp/ngrep-1 &
>>> sudo tail -f /var/log/ngcp/kamailio-proxy.**log > /tmp/proxy-1
>>>
>>> Do test call until its dead air or you think its all logged
>>>
>>> Ctrl+c to kill the tail
>>> fg 1
>>> Ctrl+c to kill the ngrep
>>>
>>> attach the /tmp/ngrep-1 and /tmp/proxy-1 to this thread.
>>>
>>>
>>> Skyler
>>>
>>>
>>>
>>> On 11/14/2012 7:30 AM, Jeremie Chism wrote:
>>>
>>>> No I did no customization.
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Nov 14, 2012, at 9:06 AM, Skyler <skchopperguy at gmail.com> wrote:
>>>>
>>>>  Did you do any customizations to LB or Proxy using customtt.tt2's (or
>>>>> hopefully not the stock cfg.tt2's)?
>>>>>
>>>>> If yes, move the customtt to /tmp/ do ngcpcfg apply and run another
>>>>> test call.
>>>>>
>>>>> Skyler
>>>>>
>>>>> On 11/14/2012 6:27 AM, Jeremie Chism wrote:
>>>>>
>>>>>> I just saw this address: 4.55.12.33
>>>>>>
>>>>>> It is a level 3 address. That is probably who my upstream is using.
>>>>>>
>>>>>> I do know that my upstream said they pass some information straight
>>>>>> through.
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>> On Nov 14, 2012, at 8:00 AM, Skyler <skchopperguy at gmail.com
>>>>>> <mailto:skchopperguy at gmail.com**>> wrote:
>>>>>>
>>>>>>  Hey,
>>>>>>>
>>>>>>> I'm not so sure that the timers on your box is the problem. There's
>>>>>>> 5-6 IP's in your capture, meaning a few proxies/end-points and right
>>>>>>> before the drop/BYE I think there is a 200 OK missing. Also, you
>>>>>>> mention that the call does drop; Indicating that there should not be
>>>>>>> a
>>>>>>> BYE at all since no person hungup.
>>>>>>>
>>>>>>> This seems to be that time-out rather than timer is the culprit, by
>>>>>>> way of no-reply to an ACK. But on which end and who is sending the
>>>>>>> BYE.
>>>>>>>
>>>>>>> Can you list out your IP's like 1.2.3.4 = subscriber, 3.2.2.1 = spce,
>>>>>>> another = upstream etc. this will make it easier, at least for me, to
>>>>>>> get a visual on the call flow to see which side is not replying.
>>>>>>>
>>>>>>> PM if you like.
>>>>>>>
>>>>>>> Skyler
>>>>>>>
>>>>>>> On 11/14/2012 5:32 AM, Jeremie Chism wrote:
>>>>>>>
>>>>>>>> I was digging through past posts and saw someone that had a similar
>>>>>>>> problem. Here was your recommendation that worked.
>>>>>>>>
>>>>>>>>  /  See if this works with your subscribers. If not, try disabling
>>>>>>>>>> the
>>>>>>>>>>
>>>>>>>>> />>/  session
>>>>>>>> />>/  timers setting this line:
>>>>>>>> />>/  enable_session_timer=yes
>>>>>>>> />>/  to
>>>>>>>> />>/  enable_session_timer=no
>>>>>>>> />>/
>>>>>>>> />>/
>>>>>>>> />>/  and exec "ngcpcfg apply" again
>>>>>>>> />>/
>>>>>>>> />>
>>>>>>>>
>>>>>>>>
>>>>>>>> /Where can I find this to edit it. What would be the command
>>>>>>>> please?/
>>>>>>>>
>>>>>>>>
>>>>>>>> Sent from my iPhone
>>>>>>>>
>>>>>>>> On Nov 13, 2012, at 2:28 PM, Jon Bonilla (Manwe)
>>>>>>>> <jbonilla at sipwise.com <mailto:jbonilla at sipwise.com>
>>>>>>>> <mailto:jbonilla at sipwise.com>> wrote:
>>>>>>>>
>>>>>>>>  El Tue, 13 Nov 2012 13:51:37 -0600
>>>>>>>>> Jeremie Chism <jchism2 at gmail.com <mailto:jchism2 at gmail.com>
>>>>>>>>> <mailto:jchism2 at gmail.com>> escribió:
>>>>>>>>>
>>>>>>>>>  U 2012/11/13 13:48:44.360480 72.21.14.34:5060 ->
>>>>>>>>>> 107.7.157.250:5060
>>>>>>>>>> BYE sip:ngcp-lb at 107.7.157.250 <mailto:lb at 107.7.157.250>
>>>>>>>>>> <mailto:lb at 107.7.157.250>:5060 SIP/2.0'
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Can't start a capture with the BYE. Please copy the whole capture
>>>>>>>>> to a
>>>>>>>>> txt file
>>>>>>>>> and the proxy log to another text file and attach them to your
>>>>>>>>> mail.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ______________________________**_________________
>>>>>>>>> Spce-user mailing list
>>>>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.**sipwise.com<Spce-user at lists.sipwise.com>
>>>>>>>>> >
>>>>>>>>> <mailto:Spce-user at lists.**sipwise.com<Spce-user at lists.sipwise.com>
>>>>>>>>> >
>>>>>>>>> http://lists.sipwise.com/**listinfo/spce-user<http://lists.sipwise.com/listinfo/spce-user>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ______________________________**_________________
>>>>>>>> Spce-user mailing list
>>>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.**sipwise.com<Spce-user at lists.sipwise.com>
>>>>>>>> >
>>>>>>>> http://lists.sipwise.com/**listinfo/spce-user<http://lists.sipwise.com/listinfo/spce-user>
>>>>>>>>
>>>>>>>
>>>>>>> ______________________________**_________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.**sipwise.com<Spce-user at lists.sipwise.com>
>>>>>>> >
>>>>>>> http://lists.sipwise.com/**listinfo/spce-user<http://lists.sipwise.com/listinfo/spce-user>
>>>>>>>
>>>>>>
>>
>>
>> --
>> Jeremie Chism
>> Triton Communications
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20121114/8587a8d3/attachment.html>