[Spce-user] Outbound time out

[Skyler]

ok, well it is definitely your box which is not replying to upstream. 
Then the upstream timer is likely reached so they BYE you.

I need a matching ngrep with proxy log. In case you don't know what I mean..

sudo ngrep-sip b -d any -qt -W byline > /tmp/ngrep-1 &
sudo tail -f /var/log/ngcp/kamailio-proxy.log > /tmp/proxy-1

Do test call until its dead air or you think its all logged

Ctrl+c to kill the tail
fg 1
Ctrl+c to kill the ngrep

attach the /tmp/ngrep-1 and /tmp/proxy-1 to this thread.


Skyler


On 11/14/2012 7:30 AM, Jeremie Chism wrote:
> No I did no customization.
>
> Sent from my iPhone
>
> On Nov 14, 2012, at 9:06 AM, Skyler <skchopperguy at gmail.com> wrote:
>
>> Did you do any customizations to LB or Proxy using customtt.tt2's (or hopefully not the stock cfg.tt2's)?
>>
>> If yes, move the customtt to /tmp/ do ngcpcfg apply and run another test call.
>>
>> Skyler
>>
>> On 11/14/2012 6:27 AM, Jeremie Chism wrote:
>>> I just saw this address: 4.55.12.33
>>>
>>> It is a level 3 address. That is probably who my upstream is using.
>>>
>>> I do know that my upstream said they pass some information straight
>>> through.
>>>
>>> Sent from my iPhone
>>>
>>> On Nov 14, 2012, at 8:00 AM, Skyler <skchopperguy at gmail.com
>>> <mailto:skchopperguy at gmail.com>> wrote:
>>>
>>>> Hey,
>>>>
>>>> I'm not so sure that the timers on your box is the problem. There's
>>>> 5-6 IP's in your capture, meaning a few proxies/end-points and right
>>>> before the drop/BYE I think there is a 200 OK missing. Also, you
>>>> mention that the call does drop; Indicating that there should not be a
>>>> BYE at all since no person hungup.
>>>>
>>>> This seems to be that time-out rather than timer is the culprit, by
>>>> way of no-reply to an ACK. But on which end and who is sending the BYE.
>>>>
>>>> Can you list out your IP's like 1.2.3.4 = subscriber, 3.2.2.1 = spce,
>>>> another = upstream etc. this will make it easier, at least for me, to
>>>> get a visual on the call flow to see which side is not replying.
>>>>
>>>> PM if you like.
>>>>
>>>> Skyler
>>>>
>>>> On 11/14/2012 5:32 AM, Jeremie Chism wrote:
>>>>> I was digging through past posts and saw someone that had a similar
>>>>> problem. Here was your recommendation that worked.
>>>>>
>>>>>>> /  See if this works with your subscribers. If not, try disabling the
>>>>> />>/  session
>>>>> />>/  timers setting this line:
>>>>> />>/  enable_session_timer=yes
>>>>> />>/  to
>>>>> />>/  enable_session_timer=no
>>>>> />>/
>>>>> />>/
>>>>> />>/  and exec "ngcpcfg apply" again
>>>>> />>/
>>>>> />>
>>>>>
>>>>>
>>>>> /Where can I find this to edit it. What would be the command please?/
>>>>>
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>> On Nov 13, 2012, at 2:28 PM, Jon Bonilla (Manwe)
>>>>> <jbonilla at sipwise.com <mailto:jbonilla at sipwise.com>
>>>>> <mailto:jbonilla at sipwise.com>> wrote:
>>>>>
>>>>>> El Tue, 13 Nov 2012 13:51:37 -0600
>>>>>> Jeremie Chism <jchism2 at gmail.com <mailto:jchism2 at gmail.com>
>>>>>> <mailto:jchism2 at gmail.com>> escribió:
>>>>>>
>>>>>>> U 2012/11/13 13:48:44.360480 72.21.14.34:5060 -> 107.7.157.250:5060
>>>>>>> BYE sip:ngcp-lb at 107.7.157.250 <mailto:lb at 107.7.157.250>
>>>>>>> <mailto:lb at 107.7.157.250>:5060 SIP/2.0'
>>>>>>
>>>>>>
>>>>>> Can't start a capture with the BYE. Please copy the whole capture to a
>>>>>> txt file
>>>>>> and the proxy log to another text file and attach them to your mail.
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>> http://lists.sipwise.com/listinfo/spce-user