[Spce-user] Domain not served here.

Dave Massey dave at optionsdsl.ca
Tue Oct 16 21:45:28 EDT 2012


Ok this worked  it doesnt reject it anymore, but now it cant find the customer.  (404 not found)

My test customer has the e.164 number DID set.  (some data xxd out).. Does the peer need to send the country code  as well?

05:37:53.138317 IP (tos 0xb8, ttl 64, id 57325, offset 0, flags [none], proto UDP (17), length 457)
    24.102.xx.xx.5060 > 209.139.xx.xx.5060: SIP, length: 429
	SIP/2.0 404 Not Found
	Via: SIP/2.0/UDP 209.139.xx.xx:5060;rport=5060;branch=z9hG4bK54d749e985288e1cd2f24-19a04849-7c9056f
	From: "905975xxxx" <sip:905975xxxx at 209.139.xx.xx;user=phone>;tag=GR52RWG346-34
	To: "999519805xxxx" <sip:519805xxxx at 24.102.xx.xx>;tag=f3067022b00c564156251ba2f28f331f-d9f9
	Call-ID: b7b308bc-acf86d35-4072c4cc-2eaee3d4 at 209.139.xx.xx
	CSeq: 1 INVITE
	Server: Sipwise NGCP Proxy 2.X
	Content-Length: 0


On 2012-10-16, at 9:02 PM, Andreas Granig <agranig at sipwise.com> wrote:

> Hi Dave,
> 
> On 10/17/2012 02:46 AM, Dave Massey wrote:
>> But when I try to make a call from a DID into a customer, I get an error Domain not served here.
>> I TCPdumed the packet and I guess it wants my domain in the request, but the peer sends it in  sip:519808xxxx at 24.102.xxx.xxx and sipwise wants it as sip:519808xxxx at sip.domain.com
>> 
>> I dont really want to use an IP, as it may change and dont want to reconfigure 50 ATAs :(
>> 
>> What do I do?
> 
> Just create an empty domain. This will make the system accept the call,
> while still being able to find the subscriber for this number (assuming
> that you set the 519808xxxx as E164 number for a subscriber, not as the
> subscriber username).
> 
> Andreas
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user





More information about the Spce-user mailing list