[Spce-user] Cannot Register Devices after VM setup

[Rob Watson]

Thank you.

>From the netstat it appears Kamailio is listening on that address and ports
5060 and 5061; I have those ports forwarded and tried an external port scan
and I and both ports are responding.

I only have one network card running on eth0, so it appears that I am good
on the network config..

Any other thoughts?


On Thu, Apr 11, 2013 at 11:54 PM, Jon Bonilla <jbonilla at sipwise.com> wrote:

> El Thu, 11 Apr 2013 23:30:24 -0400
> Rob Watson <rjwatson37 at gmail.com> escribió:
>
> > Downloaded and setup the VM instance using the instructions (setup on
> > Virtual Box)
> > Can log into Admin and Customer Care Portal but cannot get devices to
> > register.
> >
> > Times out when trying to setup via Android using CSipSimple. Using
> Jitsi, I
> > get the Certificate warning, but nothing happens following that.
> >
> > Not sure where to look for debugging info or what next steps to take.
> > Get the same results on both the local network and from outside.
> >
> >  Initially I used DHCP and then I changed to a static IP, got the same
> > results. Rexamined the blog entry and saw the update for eaddress x.x.x.x
> > but after searching the .yml file I could not find an "eaddress" to
> update.
> >
>
> There's no eadress any more. You need to use ngcp-network commmand to make
> your
> system listen to the outside:
>
> http://www.sipwise.com/doc/2.8/spce/ar01s05.html#_network_configuration
>
>
> check that kamailio is listening in the public interface. Something like
>
> "netstat -tulnp | grep kamailio"
>
>
>
> cheers,
>
> Jon
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130412/de954f6b/attachment-0001.html>