[Spce-user] Peering

[Pedro Guillem]

Solved....

The "minport" and "maxport" variables for mediaproxy were inverted in
config.yml (the port max value was in the min variable and vice versa), i
believe the media ports were not even being opened.

Maybe it would be good to do a X smaller than Y check on the ports before
compiling the config for mediaproxy... just to avoid blind users like me :-)

Cheers.

Pedro


On Mon, Apr 15, 2013 at 1:59 PM, Andrew Pogrebennyk <
apogrebennyk at sipwise.com> wrote:

> Hi Pedro,
> please provide your /var/log/ngcp/rtp.log, because those lines are not
> enough to judge about the problem.
>
> On 15/04/2013 19:58, Pedro Guillem wrote:
> > Hi All.
> >
> > The call is about to connect, after the "Session progress message"..
> > rtpproxy reports an error:
> >
> > (SEE LAST LINE)
> >
> > INFO: <script>: Applying callee-out peer rewrite rules to called party
> > using dpid '4' - R=sip:541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: Rewriting called party '541143183000' to
> > '3333#541143183000' -
> > R=sip:541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: Setting P-Called-Party-ID
> > '<sip:3333#541143183000 at XX.XX.XXX.XXX>' -
> > R=sip:3333#541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: Writing sbc parameters
> >  ;aleg_sst_enable=no;sst_enable=no -
> > R=sip:3333#541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: Setting 'sip:XX.XX.XXX.XXX:5060' taken from R-URI as
> > next hop after lb for PSTN call -
> > R=sip:3333#541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: Appending P-D-URI
> > 'sip:127.0.0.1:5060;received='sip:XX.XX.XXX.XXX:5060;transport=udp'' -
> > R=sip:3333#541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: Forcing request via B2BUA 'sip:127.0.0.1:5080
> > <http://127.0.0.1:5080>' -
> > R=sip:3333#541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: Request leaving server, D-URI='sip:127.0.0.1:5080
> > <http://127.0.0.1:5080>' -
> > R=sip:3333#541143183000 at XX.XX.XXX.XXX:5060;transport=udp
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> >
> > INFO: <script>: NAT-Reply - S=100 - Connecting M=INVITE
> > IP=190.147.154.XXX:5060 (127.0.0.1:5080 <http://127.0.0.1:5080>)
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> > INFO: <script>: NAT-Reply - S=183 - Session Progress M=INVITE
> > IP=190.147.154.XXX:5060 (127.0.0.1:5080 <http://127.0.0.1:5080>)
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> >
> > INFO: <script>: Remove existing ICE candidates (if any) for caller -
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>
> >
> > I*NFO: <script>: Use mediaproxy for backward direction -
> > ID=0b66186a3df5bf46 at 192.168.0.18 <mailto:0b66186a3df5bf46 at 192.168.0.18>*
> >
> > *ERROR: rtpproxy-ng [rtpproxy.c:1318]: proxy replied with error: Unknown
> > call-id*
> >
> >
> >
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com
> > http://lists.sipwise.com/listinfo/spce-user
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130415/acae908c/attachment-0001.html>