[Spce-user] New install cannot register subscribers

[Lorenzo Mangani]

Oren,

Those are just keep-alive messages and unrelated to your case. Could you
capture the SIP output of the actual device trying to REGISTER and the
resulting (failure?) messages sent back from the NGCP in order to make some
suggestions as of the problem? Also where did you see the address getting
truncated? You might be suffering from misconfiguration somewhere.

Best

Lorenzo Mangani

HOMER DEV TEAM
QXIP - Capture Engineering


On Sun, Aug 4, 2013 at 8:57 PM, Oren Yehezkely <orenyny at gmail.com> wrote:

> Hello,
>
> I just installed a new server. Everything seems to work fine so far. I am
> able to reach the server using IP and host name.
>
> However no matter what I do, I cannot register any SIP device.
>
> I have tried creating 2 domains one with the host name and one with the IP
> address, none have worked.
>
> I have found about ngrep-sip by searching this list for similar issues and
> looked at the output.
>
> The only thing I have noticed is that in some messages the IP address of
> the server is truncated.
> So, assuming that the correct IP address (this is just an example, the
> correct IP address is an external IP) is 192.168.0.246.
> A message will show the IP address as 192.168.0.24 (note the missing 6 at
> the end.
>
> Messages are below(I revised the actual IP address). Is this an expected
> behavior?
> If so, can you tell why I cannot register? I have no additional firewall.
>
> Thanks,
>
> Oren
>
> U 2013/08/04 14:47:45.246025 127.0.0.1:5062 -> 127.0.0.1:5060
> SIP/2.0 200 Alive'
> Record-Route: <sip:127.0.0.1;lr=on;ftag=3319431d;ngcplb=yes;socket=udp:
> 127.0.0.1:5060>'
> Via: SIP/2.0/UDP
> 127.0.0.1;branch=z9hG4bKe92c.17c5ccea973d4532a15a59c2f07c0ba3.0'
> Via: SIP/2.0/UDP 192.168.0.24:9676
> ;received=127.0.0.1;branch=z9hG4bK.6705ebfe;rport=9676;alias'
> From: sip:sipsak at 192.168.0.24:9676;tag=3319431d'
> To: sip:nagios at voip.sipwise.local
> ;tag=1d24a28a0bded6c40d31e6db8aab9ac6.678b'
> Call-ID: 857293597 at 192.168.0.24'
> CSeq: 1 OPTIONS'
> P-Out-Socket: udp:127.0.0.1:5060'
> Server: Sipwise NGCP Proxy 2.X'
> Content-Length: 0'
> '
>
> #
> U 2013/08/04 14:47:45.246181 127.0.0.1:5060 -> 127.0.0.1:9676
> SIP/2.0 100 Trying'
> Via: SIP/2.0/UDP 192.168.0.24:9676
> ;received=127.0.0.1;branch=z9hG4bK.6705ebfe;rport=9676;alias'
> From: sip:sipsak at 192.168.0.24:9676;tag=3319431d'
> To: sip:nagios at voip.sipwise.local'
> Call-ID: 857293597 at 192.168.0.24'
> CSeq: 1 OPTIONS'
> Server: Sipwise NGCP Proxy 2.X'
> Content-Length: 0'
> '
>
> #
> U 2013/08/04 14:47:45.246303 127.0.0.1:5060 -> 127.0.0.1:9676
> SIP/2.0 200 Alive'
> Record-Route: <sip:127.0.0.1;lr=on;ftag=3319431d;ngcplb=yes;socket=udp:
> 127.0.0.1:5060>'
> Via: SIP/2.0/UDP 192.168.0.24:9676
> ;received=127.0.0.1;branch=z9hG4bK.6705ebfe;rport=9676;alias'
> From: sip:sipsak at 192.168.0.24:9676;tag=3319431d'
> To: sip:nagios at voip.sipwise.local
> ;tag=1d24a28a0bded6c40d31e6db8aab9ac6.678b'
> Call-ID: 857293597 at 192.168.0.24'
> CSeq: 1 OPTIONS'
> Server: Sipwise NGCP Proxy 2.X'
> Content-Length: 0'
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130804/04fb91b5/attachment-0001.html>