[Spce-user] Hunting with voicemail

[Daniel Grotti]

Hi jeremie,
it's not possible to convert a hunt group into a ringgroup (o
callgroup), so using the call forwards section you cannot call, for
example, 3 different sip URI at the same time and if no answer go to
voicemail.

Here you can find some hints:
http://lists.sipwise.com/pipermail/spce-user/2011-July/000505.html

Also you can try this way:

1. create a dummy subscriber (D) where you can add your SIP URI to call
as "permanent contact" (B and C)
2. Set call forward for you target SIP URI (A) as:
        - Call D for 300sec
        - Call Voicemail

In this way, if you call A, the system will call the dummy subscriber D
in parallel forking on B and C (so B and C will ring at the same time).
After 300sec, if no answer the call will go to voicemail.

The problem here is to use SIP permanent Contact for the dummy
subscriber, that could be change over time.


Cheers,

Daniel







On 02/09/2013 09:37 PM, Jeremie Chism wrote:
> I have hunting down but there is one thing I haven't figured out. 
>
> I have a hunt group set for busy. What I would like it to do is ring the hunt group for a given time and if no answer go to voicemail for the main line. 
>
> Right now it rings through all numbers before going to voicemail. 
>
> Any help would be appreciated 
>
>
>
> Sent from my iPhone
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130211/9082e4dc/attachment-0001.html>