[Spce-user] Subscriber NAT - No inbound calls

[Skyler]

Running 2.6 with stock registrar.cfg.tt2

S.

On Wed, Feb 20, 2013 at 2:16 PM, Skyler <skchopperguy at gmail.com> wrote:

> Ok, I'm at a wall now. Checked/re-checked everything I can think of. The
> call(s) are definitely sending to sip:16613360423 at 192.168.1.105:5060which is non-responsive until it reaches timeout or hungup/bye. Outbound is
> 100%.
>
>  I want to provide more specific information, if needed. What other info
> can help, to see a swift solution?
>
> Thanks,
> S.
>
> On Wed, Feb 20, 2013 at 12:03 PM, Skyler <skchopperguy at gmail.com> wrote:
>
>> Looking further, I have:
>>
>> modparam("registrar", "default_expires", [%
>> kamailio.proxy.default_expires %])
>> modparam("registrar", "min_expires", [% kamailio.proxy.min_expires %])
>> modparam("registrar", "max_expires", [% kamailio.proxy.max_expires %])
>> modparam("registrar", "method_filtering", 0)
>> modparam("registrar", "append_branches", 1)
>> modparam("registrar", "max_contacts", [%
>> kamailio.proxy.max_registrations_per_subscriber %])
>> modparam("registrar", "received_avp", "$avp(s:received)")
>> modparam("registrar", "use_path", 1)
>> modparam("registrar", "path_mode", 0)
>> modparam("registrar", "path_use_received", 1)
>>
>> On Wed, Feb 20, 2013 at 11:00 AM, Skyler <skchopperguy at gmail.com> wrote:
>>
>>> Hi,
>>>
>>>  Just recently added a user that is showing NAT 'yes' in the admin
>>> panel. That user is not able to receive inbound calls though due to NAT as
>>> SPCE appears to be sending to private IP instead of the received IP.
>>>
>>>  Looking at the contact (below) it may be due to extra < > within path=
>>> but I am not 100% sure if I made a custom change somewhere that affected
>>> this at some point in the past. Any suggestions on what I should be looking
>>> into to fix the NAT contact?
>>>
>>>
>>> skyler at lgn10:~$ sudo ngcp-kamctl proxy ul show
>>> 16613360423 at removeddomain.com
>>> Contact:: <sip:16613360423 at 192.168.1.105:5060
>>> ;rinstance=af3772052de0414f>;q=;expires=44;flags=0x0;cflags=0xC0;socket=<udp:
>>> 127.0.0.1:5062>;methods=0x13DF;received=<sip:170.120.241.98:5060>;user_agent=<X-Lite
>>> release 1100l stamp 47546>;path=<<sip:ngcp-lb at 127.0.0.1
>>> ;lr;received='sip:170.120.241.98:5060'>>
>>>
>>> Regards,
>>> Skyler
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130220/240e62ca/attachment-0001.html>