[Spce-user] Fwd: Sipwise sending BYE 60 seconds after INVITE

[Matt Van Veenendaal]

Hi Guys, 

I've been having this issue recently as well recently and i'm getting the same issues. 
I've attempted a few things with no luck:

1. Altering SEMS configuration in /etc/ngcp-config/config.yml

I've tried turning off conferencing, setting calltimer_enable to 'no' and setting session_timer enable: to 'no'.
In all of these cases the call religiously disconnects at 60 seconds.

2. Altering /etc/sems/sems.conf

I've tried tinkering with this file in particular commenting out the following two lines:
sip_timer_b=60000
sip_timer_f=60000


This worked in 2.6 and seems to have no effect in 2.7
I had some brief luck setting these to be 10 times higher and connections seemed to work well, however this reverted an hour or so later and now i'm still getting the 60 second disconnect issue.

It's worth noting again that this message is not originating from the client and is sent to both clients simultaneously and only occurs for calls that are peer-to-peer. Turning off ICE on the client forces the media proxy and the call to be longer then 60 seconds, but we would prefer to alow these calls to be P2P.

In terms of answering the above question about the sems log, there's really nothing interesting there:
Jan 16 19:10:10 sipwise01 sems[2170]: [#7f9c0bafa700] [run, udp_trsp.cpp:186] INFO: Started SIP server UDP transport on 127.0.0.1:5080
Jan 16 19:10:10 sipwise01 sems[2170]: [#7f9c0b8f8700] [run, udp_trsp.cpp:186] INFO: Started SIP server UDP transport on 127.0.0.1:5080
Jan 16 19:10:10 sipwise01 sems[2170]: [#7f9c0b9f9700] [run, udp_trsp.cpp:186] INFO: Started SIP server UDP transport on 127.0.0.1:5080
Jan 16 19:10:10 sipwise01 sems[2170]: [#7f9c0b7f7700] [run, udp_trsp.cpp:186] INFO: Started SIP server UDP transport on 127.0.0.1:5080


Thanks for your help!
-- 
Matt Van Veenendaal


On Wednesday, November 28, 2012 at 2:31 AM, Andrew Pogrebennyk wrote:

> James,
> 
> On 11/26/2012 08:42 PM, James Hurley wrote:
> > Here's the log, it looks like the BYE is coming from SEMS on port 5080.
> > ( the users in question are 16.james and 16.james_expert )
> > 
> > https://gist.github.com/e865aa36c663665503a1
> 
> Yes. Is there any hint in sems.log?
> 
> Andrew
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com (mailto:Spce-user at lists.sipwise.com)
> http://lists.sipwise.com/listinfo/spce-user
> 
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20130116/f2baed88/attachment.html>