[Spce-user] SBC Call routing

[Deon Vermeulen]

Hi Matthew

My current setup is to only do call routing based on source to 
destination and make use of the SBC functionality.


Herewith a layout of what I've done:

- Features/Services disabled
         * Asterisk Uninstalled, voice mail disabled.
         * rateomat
         * conference
         * vsc
         * Under ww_admin
             - billing_features: 0
             - conference_features: 0
             - vsc_features: 0
             - voicemail_features: 0
         * Under ww_csc
             - display_account_info: 0
             - main_menu - All are set to 0
             - payment_features: 0
             - Removed all language options and set default_language: en
             - default_uri: ''

- SEMS
         * sbc:
             - calltimer_enable: 'yes'
             - session_timer:
                 - enable: 'yes'

-    PROXY
              - allow_peer_relay: 'yes'


- PEERINGS:
           * From Wholesale:
               - force_outbound_calls_to_peer: 'yes'
               - Peering Rules:
                 Callee Prefix            Caller Pattern
                     44                                
^sip:.+ at 192\.168\.0.\250$

           * To Carrier:
               - force_outbound_calls_to_peer: 'yes'
               - sst_enable: 'yes'
               - sst_expires: 300
               - sst_min_timer: 90
               - sst_max_timer: 7200
               - outbound_from_user: User-Provided-Number
               - outbound_from_display: Network-provided-Number
               - outbound_pai_user: Network-provided-Number
               - Peering Rules - Set to Default. ( I haven't play around 
with source to destination for outbound to carrier)


Hope this helps.


Kind Regards
Deon



> Matthew Ogden <mailto:matthew at tenacit.net>
> May 2, 2013 9:19 AM
>
> How did you accomplish this (for future readers)
>
> Deon Vermeulen <mailto:vermeulen.deon at gmail.com>
> May 2, 2013 8:25 AM
> I manage to get this working.
>
>
> Kind Regards
> Deon
>
> Deon Vermeulen <mailto:vermeulen.deon at gmail.com>
> April 28, 2013 10:26 PM
> Hi
>
>
> My SPCE setup is a SBC (gateway) only.
> I don't do any Billing, Voice Mail, conferencing or speed dialling.
> I mainly/only use the SBC features and routing of calls from/to 2 
> peers from/to our Wholesale.
>
>
> DIAGRAM:
>
>                                                           CARRIER 1 
> (International)
>                                                                 /
>                                                               /
> WHOLESALE = = = = = = = = = SBC
>                                                              \
>                                                                \
>                                                             CARRIER 2 
> (International)
>
>
>
> I've been "playing" with different configuration scenarios, but keep 
> running into "routing" deadened(s).
>
> The idea is as follows:
>
>     -    Two International Carriers (Inbound and Outbound)
>     -    Carrier/Provider Billing will be done on the WHOLESALE so we 
> require two separate Profiles, one for each Carrier.
>     -    Outbound routing to the carriers are based on call cost and 
> will be done on the WHOLESALE.
>     -    Inbound Routing over the SBC to the WHOLESALE should be done 
> based on carrier from whom the call was received to be able to Bill 
> the Carrier/Provider for calls to our network.
>
>
> The 3 Scenarios I've setup and tested thus far, but with no avail, are 
> as follows:
>
> 1. One Peering Profile to each Carrier and One Subscriber Profile for 
> each Carrier to the Wholesale.
>     - Problem I'm facing here is that I'm not 100% sure how to route 
> Outbound Calls from WHOLESALE to the correct Peering.
>
> 2. One Subscriber Profile to each Carrier and One Peering Profile for 
> each Carrier to the Wholesale.
>     - Again, I'm not 100% sure how to route Inbound Calls from the 
> Carriers to the correct Subscriber.
>
> 3. One Peering Profile to each Carrier and One Peering Profile for 
> each Carrier to the Wholesale.
>     - Problem I'm facing is that calls are not routed between 
> Peerings. i.e. Calls from WHOLESALE destined to CARRIER 1 is not 
> routed to "Outbound" Peering Profile destined for CARRIER 1.
>         * I would assume that this scenario could be the BEST option 
> as it gives more routing options/flexibility.
>
>
> Thank you very much for any assistance/guidance.
>
>
> Kind Regards
> Deon
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130502/cc095727/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: compose-unknown-contact.jpg
Type: image/jpeg
Size: 770 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130502/cc095727/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: postbox-contact.jpg
Type: image/jpeg
Size: 1143 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130502/cc095727/attachment-0003.jpg>