[Spce-user] Intro

Skyler skchopperguy at gmail.com
Wed May 8 19:56:33 EDT 2013 

CC = country code. Are there letters in a phone number? No.
AC = area code. 3-digits for north america.
SN = subscriber number. 7-digits for north america.

No wonder spce is 404'ing your subscriber. So many frustrated words just 
left my mouth.

You have to help us help you man.

Skyler

On 5/8/2013 4:46 PM, Skyler wrote:
> Wait a second. Hold the phone.
>
> The Subscriber Preferences.pdf you sent shows
>
> a8159814493 at voip1.ics-il.net
>
> Why is there an "a" in your subscriber number?
>
> Delete that man.
>
> Skyler
>
> On 5/8/2013 4:25 PM, Skyler wrote:
>> Wow. Alright. Need to see your proxy log then.
>>
>> Prepare for an inbound test call, just before you 'send' execute:
>>
>> tail -f /var/log/ngcp/kamailio-proxy.log >
>> /tmp/vitelity-inbound-proxy-log.txt
>>
>> hangup the failed call then CTRL+C the terminal.
>>
>> Prepare for an inbound test call, just before you 'send' execute:
>>
>> tail -f /var/log/ngcp/kamailio-lb.log > /tmp/vitelity-inbound-lb-log.txt
>>
>> hangup the failed call then CTRL+C the terminal.
>>
>> Send vitelity-inbound-proxy-log.txt and vitelity-inbound-lb-log.txt to
>> the list.
>>
>> Skyler
>>
>> On 5/8/2013 2:40 PM, Mike Hammett wrote:
>>> No dice.
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions
>>> http://www.ics-il.com
>>>
>>> ----- Original Message -----
>>> From: "Skyler" <skchopperguy at gmail.com>
>>> To: spce-user at lists.sipwise.com
>>> Sent: Wednesday, May 8, 2013 2:22:24 PM
>>> Subject: Re: [Spce-user] Intro
>>>
>>> ok, so its 404'ing before loading the rewrite.
>>>
>>> 1. Set 'Inbound Vitelity 3' rewrite rule under (each) Domain
>>> Preferences.
>>> 2. Unset rewrite rule for the subscriber(s) and peer(s).
>>>
>>> This should apply the rewrite to all INVITE(s) _prior_ to the start of
>>> processing the call. So the '1' will be added and proxy will find the
>>> right subscriber.
>>>
>>> Skyler
>>>
>>> On 5/8/2013 11:37 AM, Mike Hammett wrote:
>>>> No dice and here's my results.
>>>>
>>>>
>>>>
>>>> -----
>>>> Mike Hammett
>>>> Intelligent Computing Solutions
>>>> http://www.ics-il.com
>>>>
>>>> ----- Original Message -----
>>>> From: "Skyler" <skchopperguy at gmail.com>
>>>> To: spce-user at lists.sipwise.com
>>>> Sent: Wednesday, May 8, 2013 11:45:26 AM
>>>> Subject: Re: [Spce-user] Intro
>>>>
>>>> Mike,
>>>>
>>>>     No there isn't. Best thing is to:
>>>>
>>>> ngrep-sip b -d any -qt -W byline port 5060 > /tmp/vitelity-problem.txt
>>>>
>>>> Then email that to the list.
>>>>
>>>> BTW, looking at your congestion.txt and seeing the other suggestions to
>>>> re-write rule(s). Seems you are trying to strip the leading '1', but
>>>> from what I see, you need to add a '1'. Like so:
>>>>
>>>> ^([2-9][0-9]+)$   1\1   10-digits to e164
>>>>
>>>> Put the above into your rewrite rule set, then ensure the set is
>>>> enabled
>>>> for the subscriber AND the Vitelity peer(s).
>>>>
>>>> Once confirmed, run a test call while running the ngrep above and send
>>>> to the list.
>>>>
>>>> --Skyler
>>>>
>>>> On 5/8/2013 9:02 AM, Mike Hammett wrote:
>>>>> That didn't pan out for me either.
>>>>>
>>>>> Is there some sort of debugging that has more verbosity than ngcp-sip?
>>>>>
>>>>>
>>>>>
>>>>> -----
>>>>> Mike Hammett
>>>>> Intelligent Computing Solutions
>>>>> http://www.ics-il.com
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Kevin Masse" <kmasse at questblue.com>
>>>>> To: "Mike Hammett" <sipwise at ics-il.net>, spce-user at lists.sipwise.com
>>>>> Sent: Tuesday, May 7, 2013 4:31:15 PM
>>>>> Subject: RE: [Spce-user] Intro
>>>>>
>>>>> Mike, try to verify this:
>>>>>
>>>>> Do you have a Peering Server for Vitelity
>>>>> You should have a Peering Server Vitel-Inbound with an IP that you
>>>>> are instructed to use from Vitelity
>>>>>
>>>>> Then a Peering Rule under that Peering Server
>>>>> In this area just put a 1 in the Callee Prefix nothing in Callee
>>>>> Pattern or Caller Pattern
>>>>>
>>>>> Then in REWRITE RULES
>>>>>
>>>>> Set the following in Outbound Rewrite Rules for Callee   (YES I did
>>>>> say Outbound Rewrite Rules, don’t think of it the way it may appear)
>>>>>
>>>>> Match Pattern: ^(1|)([1-9][0-9][0-9]+)$   Replacement Pattern:
>>>>> \2     Description:  Take off the 1
>>>>>
>>>>> Now inbounds calls should arrive and work with either your e164
>>>>> number assigned to the subscriber /OR/ your alias number assigned to
>>>>> that subscriber.
>>>>>
>>>>>
>>>>> Vitelity was quite clear with their error message sent to you with
>>>>> the call fail notification.
>>>>> That indicates that you are close.
>>>>>
>>>>> Now, there is one reason that most will agree with in the forum.
>>>>> This is offered for free and basically do your best to figure out.
>>>>>
>>>>> Sipwise offers paid services and a commercial product which will
>>>>> work out of the box.  I think if they truly offered all the answers
>>>>> in a manual it could be more difficult to offer their commercial
>>>>> product / pro product.
>>>>>
>>>>> I am with you and most others, a good detailed screen shot with
>>>>> examples it really missing.
>>>>>
>>>>> Let me know how you make out with the above.  Using vitelity is
>>>>> really straight forward once you get the above setting working.
>>>>>
>>>>> The examples I provided you are with us running it a SBC mode we do
>>>>> not connect any devices to sipwise and only route traffic to
>>>>> asterisk boxes in the field for our clients.  No SIP devices
>>>>> register to our configuration.  We use trusted sources and send
>>>>> traffic to the end user PBX.
>>>>>
>>>>> I hope this helps.
>>>>>
>>>>> Kevin
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: spce-user-bounces at lists.sipwise.com
>>>>> [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Mike Hammett
>>>>> Sent: Tuesday, May 07, 2013 4:44 PM
>>>>> To: spce-user at lists.sipwise.com
>>>>> Subject: Re: [Spce-user] Intro
>>>>>
>>>>> I did change it over to IP authentication. The inbound calls hit my
>>>>> SIPwise box, but it rejects them. I don't have any devices
>>>>> associated with it, but I do have VM setup. Ideas?
>>>>>
>>>>> BTW: Maybe a beginner\quick setup guide and then a more advanced
>>>>> manual or set of wiki articles for the more advanced topics? The
>>>>> basics should include what I have to do to connect to origination
>>>>> and termination peers, provision a client device and have incoming
>>>>> calls route to that client and their voicemail.
>>>>>
>>>>>
>>>>>
>>>>> -----
>>>>> Mike Hammett
>>>>> Intelligent Computing Solutions
>>>>> http://www.ics-il.com
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Mike Hammett" <sipwise at ics-il.net>
>>>>> To: spce-user at lists.sipwise.com
>>>>> Sent: Monday, May 6, 2013 7:01:18 AM
>>>>> Subject: Re: [Spce-user] Intro
>>>>>
>>>>> =====
>>>>> A call to your DID 815981XXXX  from 815739XXXX has failed at 5:48am
>>>>> on 05/06/2013 MDT. We received 'CONGESTION'  when attempting to
>>>>> route the call to your server or device. This number is configured
>>>>> to route to the peer 65.182.XXX.XXX.
>>>>>
>>>>> This error usually means your server or device does not recognize
>>>>> the number being dialed. If using asterisk, make sure you have the
>>>>> correct inbound context specified on your inbound trunk and that you
>>>>> have correctly added an inbound route/extension logic for this DID.
>>>>> =====
>>>>>
>>>>> So apparently whatever I did is wrong.
>>>>>
>>>>>
>>>>>
>>>>> -----
>>>>> Mike Hammett
>>>>> Intelligent Computing Solutions
>>>>> http://www.ics-il.com
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Mike Hammett" <sipwise at ics-il.net>
>>>>> To: spce-user at lists.sipwise.com
>>>>> Sent: Monday, May 6, 2013 6:23:41 AM
>>>>> Subject: Re: [Spce-user] Intro
>>>>>
>>>>> I did see where to change to IP based authentication and did so. Why
>>>>> is IP authentication preferred over user authentication? Well, other
>>>>> than it is more complicated to do this with SIPWise.
>>>>>
>>>>> I haven't tested it yet, but I made two peer groups, one for inbound
>>>>> and one for outbound. I didn't create any peering rules for the
>>>>> inbound group.
>>>>>
>>>>>
>>>>>
>>>>> -----
>>>>> Mike Hammett
>>>>> Intelligent Computing Solutions
>>>>> http://www.ics-il.com
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Kevin Masse" <kmasse at questblue.com>
>>>>> To: "Skyler" <skchopperguy at gmail.com>, spce-user at lists.sipwise.com
>>>>> Sent: Monday, May 6, 2013 6:08:15 AM
>>>>> Subject: Re: [Spce-user] Intro
>>>>>
>>>>> Good morning, I noticed something that needs to be addressed when
>>>>> using Vitelity.
>>>>>
>>>>>>>> Proxy:        sip28.vitelity.net (66.241.99.27)
>>>>>>>> Outbound Proxy:        outbound.vitelity.net
>>>>>
>>>>> Not all accounts with Vitelity will use the same inbound and
>>>>> outbound settings.
>>>>> Vitelity may send you traffic from any of the following
>>>>> 64.2.142.0/24
>>>>> 66.241.99.0/24
>>>>>
>>>>> If you are using settings provided by another Vitelity user it may
>>>>> not be the same as yours.  Make sure you know what your provisioned
>>>>> for with Vitelity and use those settings.
>>>>>
>>>>> Additionally it is not suggested to use registration with providers.
>>>>> If you can avoid it, use IP Authentication.  In the Vitelity portal
>>>>> go to the support link, then click on sub accounts. You will be able
>>>>> to setup your IP there for IP Authentication.
>>>>>
>>>>> Thanks,
>>>>> Kevin
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: spce-user-bounces at lists.sipwise.com
>>>>> [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Skyler
>>>>> Sent: Monday, May 06, 2013 4:14 AM
>>>>> To: spce-user at lists.sipwise.com
>>>>> Subject: Re: [Spce-user] Intro
>>>>>
>>>>> Woops, apparently I need sleep. sry.
>>>>>
>>>>> On 5/5/2013 9:53 PM, Skyler wrote:
>>>>>> Jeremie,
>>>>>>
>>>>>>      Do you also have user/pass on your vitality peer?
>>>>>>
>>>>>>      "I'm not sure how I'm supposed to put this into Sipwise."
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 5/5/2013 6:10 PM, Jeremie Chism wrote:
>>>>>>> You enter the information into sip peers. I use vitality as one
>>>>>>> of my
>>>>>>> upstreams. I think we have 5 or so now. If you use the accept all
>>>>>>> rule for the peer it will allow any call to come in. Rewrite rules
>>>>>>> are used to normalize incoming calls to e164 format. A rewrite rule
>>>>>>> can be used for many things. Ex. If you want to use *98 for
>>>>>>> voicemail
>>>>>>> instead of the default 2000 a rewrite rule will do that. The users
>>>>>>> manual is pretty detailed for peers. The only thing you may need
>>>>>>> help
>>>>>>> for is the rewrite rules.
>>>>>>>
>>>>>>> Sent from my iPhone
>>>>>>>
>>>>>>> On May 5, 2013, at 7:35 PM, Mike Hammett <sipwise at ics-il.net> wrote:
>>>>>>>
>>>>>>>> Little of the peering section makes sense to me. One of my
>>>>>>>> upstreams
>>>>>>>> has given me the following information:
>>>>>>>>
>>>>>>>> Proxy:        sip28.vitelity.net (66.241.99.27)
>>>>>>>> Outbound Proxy:        outbound.vitelity.net
>>>>>>>> Login:        XXXXXXXXXX
>>>>>>>> Password:        XXXXXXXXXX
>>>>>>>>
>>>>>>>> I'm not sure how I'm supposed to put this into Sipwise. I want
>>>>>>>> to be
>>>>>>>> able to receive calls from this provider as well as send them
>>>>>>>> calls.
>>>>>>>> As I add more providers, I want to be able to receive calls from
>>>>>>>> them and send my outbound to them.
>>>>>>>>
>>>>>>>> I see there was a lot of attention paid to the Rewrite Rule Set
>>>>>>>> section, of which I'm not sure why you even need that. Just have a
>>>>>>>> check box on each client (Force outbound caller-ID to DID).
>>>>>>>> Done, or
>>>>>>>> not.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> -----
>>>>>>>> Mike Hammett
>>>>>>>> Intelligent Computing Solutions
>>>>>>>> http://www.ics-il.com
>>>>>>>>
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "Jon Bonilla" <jbonilla at sipwise.com>
>>>>>>>> To: spce-user at lists.sipwise.com
>>>>>>>> Sent: Thursday, May 2, 2013 5:10:06 AM
>>>>>>>> Subject: Re: [Spce-user] Intro
>>>>>>>>
>>>>>>>> El Sun, 28 Apr 2013 16:38:02 -0500 (CDT) sipwise at ics-il.net
>>>>>>>> escribió:
>>>>>>>>
>>>>>>>>> I'm just setting it up now. I've used Asterisk (pre-1.2 aka flat
>>>>>>>>> files, no gui help) and a few Asterisk based systems over the
>>>>>>>>> years, so I at least have the basics of VoIP down. The install was
>>>>>>>>> much more pleasant than PBX in a Flash. That asks a million
>>>>>>>>> unnecessary questions and takes forever.
>>>>>>>>>
>>>>>>>>> Thus far my commentary on the setup is thorough, but very
>>>>>>>>> confusing.
>>>>>>>>> Very
>>>>>>>>> little of the terminology used makes sense to me. I am forging
>>>>>>>>> ahead through the setup, but I'm not sure what I'm doing or how
>>>>>>>>> the
>>>>>>>>> pieces fit together.
>>>>>>>>> Maybe I'll understand better once it's running, but for now...
>>>>>>>>> I'm
>>>>>>>>> lost.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> Well, the installation process is quite unattended as you've seen.
>>>>>>>> The Handbook
>>>>>>>> gives you an overview of what you have but also a quick start
>>>>>>>> guide.
>>>>>>>> Follow it
>>>>>>>> and try to understand the terms behind it. Don't try to think in
>>>>>>>> "pbx" terms because the spce is not a pbx or an asterisk system.
>>>>>>>>
>>>>>>>> Ask here when you get stucked. And you can always ask for a
>>>>>>>> personal
>>>>>>>> training/webinar to our sales team. We're organizing trainings in
>>>>>>>> several countries too.
>>>>>>>>
>>>>>>>> cheers,
>>>>>>>>
>>>>>>>> Jon
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Spce-user mailing list
>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Spce-user mailing list
>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> http://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> http://lists.sipwise.com/listinfo/spce-user
>>>

More information about the Spce-user mailing list