[Spce-user] Force CLI

[Andrew Pogrebennyk]

Martin,

what is set for allowed_clis preference of the Asterisk subscriber?
It should match the main E.164 number assigned to the subscriber plus
everything behind it..

That was if the Asterisk sends 9030 which is not permitted the system
will override User-Provided Number (UPN) with value of user_cli. Please
also check that outbound_from_user and outbound_pai_user are set to UPN.

Hope this helps. Please send the kamailio-proxy log if this doesnt work.

On 05/10/2013 10:45 AM, Martin Wong wrote:
> Hi all, 
> 
> here're some sip traces.
> 
> 1.1.1.1 -> Asterisk Box
> 2.2.2.2 -> SPCE
> 3.3.3.3 -> SIP PEER
> 
> So I've registered 9030 extension on the Asterisk box. Made a call to an
> external number (98769876), goes to 2.2.2.2 which is the SPCE. 
> 2.2.2.2 SPCE goes to 3.3.3.3 which is the sip peer. 
> 
> problem is ... even though user_cli or enum is set in the subscriber
> details, that setting is not getting pulled through when the INVITE goes
> to 3.3.3.3 (sip peer). The 9030 still goes through and replaces whatever
> is setup in the subscriber.
> 
> Can someone advise what can be done to rectify this or troubleshoot?