[Spce-user] Phone --> SBCE/B2BUA --> PBX

Jon Bonilla (Manwe) jbonilla at sipwise.com
Wed Oct 30 11:11:08 EDT 2013

El Tue, 29 Oct 2013 12:59:47 +0100
Rogier Banis <rogier at ningaloo.nl> escribió:

> Hi all,
> I have the following scenario:
> SIP Phone ——>  SBCE —> PBX
> The sip phone registers to SBCE and in the subscriber settings i enabled
> remote authentication so that the SBCE registers to the PBX. So far so good,
> everything is registered. Now i want that everything that is being dialed by
> the SIP Phone, mainly all internal calls XXX are being send to the PBX. Now i
> can not make any internal calls between 2 sip phones or let a sip phone be
> reached from a phone that is directly registered to the PBX. What am i
> missing here in the settings? I did read the manual very well but still can’t
> get this solved. Actually i don’t want the sbce to do anything besides B2BUA.
> Thank you all for thinking with me.
> Best regards,
> Rogier

If you create the pbx as a peer, set the peering rule to match everything and
set force_outbound_calls_to_peer preference in the subscriber (or domain)
preferences all the calls should be sent to the pbx

is this the case?

a ngrep or log would also explain you what happened.



-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20131030/ae2969f2/attachment-0001.asc>

More information about the Spce-user mailing list