[Spce-user] t.38 fax from client to upstream SIP prover

Daniel Grotti dgrotti at sipwise.com
Fri Sep 27 07:50:48 EDT 2013


Hi Matthew,

The Re-INVITE's R-URI doesn's look good to me:

New request - M=INVITE
R=sip:127.0.0.1;r2=on;lr=on;ftag=0B495E44-523C8DE4000D55D6-B1B9F700;ngcplb=yes



It seems the peer is settinge the a Record-Route header as R-URI.


Daniel


On 09/20/2013 08:14 PM, Matthew Ogden wrote:
> Hi
> 
>  
> 
> Attached is the proxy log for this call eith e164, and the sip flow ,
> both anonymoised… here is also a pic of the wireshark flow, (easier than
> looking at sip-flow in text).
> 
>  
> 
> If you need anything else, let me know! (I want the full logs here on
> the thread, but of course, I anonymize them).
> 
>  
> 
> Regards
> 
> Matthew
> 
>  
> 
> *From:*Lorenzo Mangani [mailto:lorenzo.mangani at gmail.com
> <mailto:lorenzo.mangani at gmail.com>]
> *Sent:* 20 September 2013 02:42 PM
> *To:* Matthew Ogden
> *Cc:* spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> *Subject:* Re: [Spce-user] t.38 fax from client to upstream SIP prover
> 
>  
> 
> Matthew,
> 
>  
> 
> Do you have a more detailed log set and a SIP trace for the current failure?
> 
> 
>  
> 
>  
> 
> Lorenzo Mangani
> 
>  
> 
> HOMER DEV TEAM
> 
> QXIP - Capture Engineering
> 
>  
> 
>  
> 
> On Fri, Sep 20, 2013 at 2:37 PM, Matthew Ogden <matthew at tenacit.net
> <mailto:matthew at tenacit.net>> wrote:
> 
> Any suggestions where to look? I don’t know what else to try.
> 
>  
> 
> *From:*Matthew Ogden [mailto:matthew at tenacit.net
> <mailto:matthew at tenacit.net>]
> *Sent:* 20 September 2013 11:45 AM
> *To:* 'Lorenzo Mangani'
> *Cc:* 'spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>'
> *Subject:* RE: [Spce-user] t.38 fax from client to upstream SIP prover
> 
>  
> 
> Hi
> 
>  
> 
> Rewriting the number to e.164 doesn’t seem to help.
> 
>  
> 
> The section like this is indentical, but except the 086XXX is now e164,
> and is 2786XXX… as well.   Obviously when call is the other round it
> works (provider to subscriber), and there is no “Accounting failed”.
> 
>  
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Call to
> unknown user -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>:
> Accounting failed request for uuid '0' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Setting
> acc source-leg for uuid '0':
> '0|2786XXXXXXX|<myUpstreamProviderIP>|086XXXXXXX|||<null>|||0|call|<myUpstreamProviderIP>|1379538956.820574'
> -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Setting
> acc destination-leg for uuid '0':
> '0|||<null>|<null>|0|<null>|127.0.0.1|<null>|127.0.0.1' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
>  
> 
>  
> 
> *From:*Lorenzo Mangani [mailto:lorenzo.mangani at gmail.com]
> *Sent:* 19 September 2013 10:02 AM
> 
> 
> *To:* Matthew Ogden
> *Cc:* spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> *Subject:* Re: [Spce-user] t.38 fax from client to upstream SIP prover
> 
>  
> 
> Matthew,
> 
>  
> 
> This seems to be the root problem then, just create a rule to normalize
> the inbound number to E164 (when they are not already) and you'll solve
> the issue with this re-invite most likely,
> 
> 
> Best,
> 
>  
> 
> Lorenzo Mangani
> 
>  
> 
> HOMER DEV TEAM
> 
> QXIP - Capture Engineering
> 
>  
> 
>  
> 
> On Thu, Sep 19, 2013 at 9:59 AM, Matthew Ogden <matthew at tenacit.net
> <mailto:matthew at tenacit.net>> wrote:
> 
> Hi
> 
>  
> 
> I guess that’s a fair question, though, we don’t normalise inbound calls
> numbers, we accept them for whatever the other networks sent them as.
> 
>  
> 
> Would this only be a problem because of the REINVITE (whereas all other
> voice calls are not requiring the REINVITE for t.38 negotiation).
> 
>  
> 
> Regards
> 
>  
> 
> *From:*Lorenzo Mangani [mailto:lorenzo.mangani at gmail.com
> <mailto:lorenzo.mangani at gmail.com>]
> *Sent:* 19 September 2013 09:57 AM
> 
> 
> *To:* Matthew Ogden
> *Cc:* spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> *Subject:* Re: [Spce-user] t.38 fax from client to upstream SIP prover
> 
>  
> 
> Matthew,
> 
>  
> 
> Are you sure the callee number is being normalized to E164 in both
> directions? It appears you might be only processing outbound invites here.
> 
> If this is the case, just try copy the Rewrite rules for E164
> normalization you have for outbound for inbound and re-test the scenario,
> 
>  
> 
> 
>  
> 
>  
> 
> Lorenzo Mangani
> 
>  
> 
> HOMER DEV TEAM
> 
> QXIP - Capture Engineering
> 
>  
> 
>  
> 
> On Thu, Sep 19, 2013 at 9:52 AM, Matthew Ogden <matthew at tenacit.net
> <mailto:matthew at tenacit.net>> wrote:
> 
> Hi Lorenzo,
> 
>  
> 
> JSorry, I just meant SPCE is sending a 404.
> 
>  
> 
> The call starts from my subscriber, and is made to 086. During the t.38
> handover process (or whatever we call it? Negotiation?), my upstream
> peer is doing the re-invite back (to swap it to t.38).  And this is
> where the call seems to fail. After sending the email, I tested it in
> reverse, the fax machine calls the subscriber, and the subscriber agent
> does a reinvite, and everything works fine.
> 
>  
> 
> In the outbound version that doesn’t work, If I look at a wireshark log,
> spce doesn’t send the reinvite back to subscriber, it simply replies
> back with 404 not found.
> 
> The intial reINVITE for the t.38 is occurring at:
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2649]: INFO: <script>: New
> request - M=INVITE R=sip:<myclientIP>:5060
> F=sip:086XXXXXXX@<mysipserverIP>:5060 T=sip:27XXXXX2533 at mysipdns
> IP=127.0.0.1:5080 <http://127.0.0.1:5080> (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> My relatively poor understanding (hopefully soon to be improved over
> this negotiation) is that When it’s the other way around, and it does
> work, its seems to be because the REINVITE is coming from a subscriber
> and that’s allowed. But when the REINVITE comes from the upstream
> provider, it doesn’t allow it or not able to route it?
> 
>  
> 
> Kind Regards
> 
>  
> 
> *From:*Lorenzo Mangani [mailto:lorenzo.mangani at gmail.com
> <mailto:lorenzo.mangani at gmail.com>]
> *Sent:* 19 September 2013 09:39 AM
> *To:* Matthew Ogden
> *Cc:* spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> *Subject:* Re: [Spce-user] t.38 fax from client to upstream SIP prover
> 
>  
> 
> Matthew,
> 
>  
> 
> I don't think Sipwise ("the company") is rejecting the request, but
> maybe your SPCE ("the product") box is not properly configured :)
> 
> Jokes aside, I might be wrong but apparently you're missing the proper
> rewrite rules for 086xxxx to be handled inbound - is this the format
> your fax re-invite is coming in?
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Applying caller-out peer rewrite rules to first user-provided caller CLI using dpid '3' - R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: No matching rewrite rules for '0' found - R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> 
> Best,
> 
>  
> 
> Lorenzo Mangani
> 
>  
> 
> HOMER DEV TEAM
> 
> QXIP - Capture Engineering
> 
>  
> 
>  
> 
> On Thu, Sep 19, 2013 at 12:10 AM, Matthew Ogden <matthew at tenacit.net
> <mailto:matthew at tenacit.net>> wrote:
> 
> Hi All,
> 
>  
> 
> When trying to send a fax out from a subscriber to a fax machine, my
> upstream provider does a reverse invite for T.38. But Sipwise is
> rejecting this request.
> 
>  
> 
> The log file is attached, and is below from the proxy.
> 
>  
> 
> Inbound faxes in the reverse (though to a different client) work with
> the reinvite. Why is spce saying 404 not found this way around?
> 
>  
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2657]: INFO: <script>: New
> request - M=INVITE R=sip:086XXXXXXX@<mysipserverIP>:5060 F=sip:TN001FAX
> T=sip:086XXXXXXX@<mysipserverIP>:5060 IP=<myclientIP>:5060
> (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2657]: INFO: <script>:
> Authentication failed, no credentials -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: New
> request - M=INVITE R=sip:086XXXXXXX@<mysipserverIP>:5060 F=sip:TN001FAX
> T=sip:086XXXXXXX@<mysipserverIP>:5060 IP=<myclientIP>:5060
> (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Clear
> caller preferences - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Load
> caller preferences for uuid 'b2e626b6-6c30-480a-9171-8ea7e0db82de' and
> domain part of uri 'sip:@mysipdns' -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Load
> dialplan IDs for domain 'sip:@mysipdns' -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Fetched
> dialplan IDs caller_in='<null>', callee_in='<null>' -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Use
> 'P-NGCP-Src-Ip' for CDR IP - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Dialog
> set total - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Dialog
> set user, userout, account, accountout to
> 'b2e626b6-6c30-480a-9171-8ea7e0db82de/2' -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: IP
> authorization for caller not provisioned, allow call -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>:
> User-Provided CLI '0' taken from From-User -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> '0 at TN001FAX' as initiating user-provided CLI -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> '27XXXXX2533 at mysipdns' as initiating network-provided CLI -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Searching
> for callee - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Clear
> callee preferences - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Callee is
> not local - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Check
> Administrative NCOS level - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Check
> User NCOS level - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Checking
> URI '086XXXXXXX@<mysipserverIP>' and CLI '086XXXXXXX' against block out
> lists - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Admin
> caller block mode is 'open' - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Caller
> block mode is 'open' - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Call to
> SIP Peering - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Load gws
> matching calling part 'sip:0 at mysipdns' and called user '086XXXXXXX' and
> called part 'sip:086XXXXXXX@<mysipserverIP>:5060' -
> R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Dialog
> set mark type to outgoing - R=sip:086XXXXXXX@<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Load peer
> preferences for peer host '2' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Load
> dialplan IDs for peer host '2' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Fetched
> dialplan IDs caller_out='3', callee_out='4' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Dialog
> set mark peer and peerout to '2' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> acc source-leg for uuid 'b2e626b6-6c30-480a-9171-8ea7e0db82de':
> 'b2e626b6-6c30-480a-9171-8ea7e0db82de|<null>|mysipdns|0|TN001FAX|TN001|2|||0|call|<myclientIP>|1379538950.578478'
> - R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> acc destination-leg for uuid '0':
> '0|||<null>|086XXXXXXX|0|086XXXXXXX|<myUpstreamProviderIP>|086XXXXXXX|<mysipserverIP>'
> - R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Relaying
> request, du='<null>' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Use
> mediaproxy for forward direction for IPv4/IPv4 -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Remove
> existing ICE candidates (if any) for callee -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> P-Caller-UUID to 'b2e626b6-6c30-480a-9171-8ea7e0db82de' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> P-Callee-UUID to '0' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Sessions
> Timers enabled for caller with interval 300 and method
> UPDATE_FALLBACK_INVITE -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Sessions
> Timers enabled for callee with interval 300 and method
> UPDATE_FALLBACK_INVITE -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Applying
> caller-out peer rewrite rules to first user-provided caller CLI using
> dpid '3' - R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: No
> matching rewrite rules for '0' found -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Applying
> caller-out peer rewrite rules to first network-provided caller CLI using
> dpid '3' - R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: No
> matching rewrite rules for '27XXXXX2533' found -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Prepare
> From display-name setting -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: No
> selector set, not setting CLI -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Prepare
> From username setting -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> caller_cli_userprov/caller_domain_userprov '0 at TN001FAX' for upn -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> From to '<sip:27XXXXX2533 at mysipdns>' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Prepare
> PAI username setting -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: No
> selector set, not setting CLI -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Prepare
> PPI username setting -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: No
> selector set, not setting CLI -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Prepare
> Diversion setting -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: No
> selector set, not setting CLI -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Applying
> callee-out peer rewrite rules to called party using dpid '4' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Rewriting
> called party '086XXXXXXX' to '2786XXXXXXX' -
> R=sip:086XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> P-Called-Party-ID '<sip:2786XXXXXXX@<myUpstreamProviderIP
> <sip:2786XXXXXXX@%3cmyUpstreamProviderIP>>>' -
> R=sip:2786XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Writing
> sbc parameters 
> ;aleg_sst_enable=yes;aleg_sst_expires=300;aleg_sst_min_timer=90;aleg_sst_max_timer=7200;aleg_sst_refresh_method=UPDATE_FALLBACK_INVITE;sst_enable=yes;sst_expires=300;sst_min_timer=90;sst_max_timer=7200;sst_refresh_method=UPDATE_FALLBACK_INVITE
> - R=sip:2786XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Setting
> 'sip:<myUpstreamProviderIP>:5060' taken from R-URI as next hop after lb
> for PSTN call -
> R=sip:2786XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Appending
> P-D-URI
> 'sip:127.0.0.1:5060;received='sip:<myUpstreamProviderIP>:5060;transport=udp''
> - R=sip:2786XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Forcing
> request via B2BUA 'sip:127.0.0.1:5080 <http://127.0.0.1:5080>' -
> R=sip:2786XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2655]: INFO: <script>: Request
> leaving server, D-URI='sip:127.0.0.1:5080 <http://127.0.0.1:5080>' -
> R=sip:2786XXXXXXX@<myUpstreamProviderIP>:5060;transport=udp
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:50 spce /usr/sbin/kamailio[2647]: INFO: <script>: NAT-Reply
> - S=100 - Connecting M=INVITE IP=<myclientIP>:5060 (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2653]: INFO: <script>: NAT-Reply
> - S=183 - Session Progress M=INVITE IP=<myclientIP>:5060 (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2653]: INFO: <script>: Remove
> existing ICE candidates (if any) for caller -
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2653]: INFO: <script>: Use
> mediaproxy for backward direction - ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2659]: INFO: <script>: NAT-Reply
> - S=200 - OK M=INVITE IP=<myclientIP>:5060 (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2659]: INFO: <script>: Remove
> existing ICE candidates (if any) for caller -
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2659]: INFO: <script>: Use
> mediaproxy for backward direction - ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2651]: INFO: <script>: New
> request - M=ACK R=sip:127.0.0.1:5080 <http://127.0.0.1:5080>
> F=sip:TN001FAX T=sip:086XXXXXXX@<mysipserverIP>:5060
> IP=<myclientIP>:5060 (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:52 spce /usr/sbin/kamailio[2651]: INFO: <script>: Relaying
> request, du='<null>' - R=sip:127.0.0.1:5080 <http://127.0.0.1:5080>
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2649]: INFO: <script>: New
> request - M=INVITE R=sip:<myclientIP>:5060
> F=sip:086XXXXXXX@<mysipserverIP>:5060 T=sip:27XXXXX2533 at mysipdns
> IP=127.0.0.1:5080 <http://127.0.0.1:5080> (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2649]: INFO: <script>: Remove
> existing ICE candidates (if any) for caller - R=sip:<myclientIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2649]: INFO: <script>: Use
> mediaproxy for forward direction for IPv4/IPv4 - R=sip:<myclientIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2649]: INFO: <script>: Relaying
> request,
> du='sip:127.0.0.1;r2=on;lr=on;ftag=acfc5ab0-0-13c4-55013-bd-5bb91ef2-bd;ngcplb=yes'
> - R=sip:<myclientIP>:5060 ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2655]: INFO: <script>: NAT-Reply
> - S=200 - OK M=INVITE IP=127.0.0.1:5080 <http://127.0.0.1:5080>
> (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2655]: INFO: <script>: Remove
> existing ICE candidates (if any) for callee -
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2655]: INFO: <script>: Use
> mediaproxy for backward direction - ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2647]: INFO: <script>: New
> request - M=ACK R=sip:<mysipserverIP>:5060
> F=sip:2786XXXXXXX@<myUpstreamProviderIP> T=sip:27XXXXX2533 at mysipdns
> IP=<myUpstreamProviderIP>:5060 (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2647]: INFO: <script>: Dropping
> mis-routed request - R=sip:<mysipserverIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: New
> request - M=INVITE
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> F=sip:2786XXXXXXX@<myUpstreamProviderIP> T=sip:27XXXXX2533 at mysipdns
> IP=<myUpstreamProviderIP>:5060 (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Call from
> PSTN -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Load peer
> preferences for peer host '2' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Load
> dialplan IDs for peer host '2' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Fetched
> dialplan IDs caller_in='1', callee_in='2' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Use
> 'P-NGCP-Src-Ip' for CDR IP -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Dialog
> set mark total -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Dialog
> set mark peer to '2' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: IP
> authorization for caller not provisioned, allow call -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>:
> User-Provided CLI '2786XXXXXXX' taken from From-User -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>:
> Network-Provided CLI '2786XXXXXXX' taken from From-User -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Applying
> caller-in peer rewrite rules on user-provided CLI using dpid '1' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Rewriting
> user-provided CLI '2786XXXXXXX' to '086XXXXXXX' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Applying
> caller-in peer rewrite rules on network-provided CLI using dpid '1' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Rewriting
> network-provided CLI '2786XXXXXXX' to '086XXXXXXX' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Setting
> '086XXXXXXX@<myUpstreamProviderIP>' as initiating user-provided CLI -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Setting
> '086XXXXXXX@<myUpstreamProviderIP>' as initiating network-provided CLI -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Searching
> for callee -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Applying
> callee-in peer rewrite rules using dpid '2' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: No
> matching rewrite rules for '<null>' found -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Skipping
> internal services for unauthenticated call -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Clear
> callee preferences -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Callee is
> not local -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Check
> Administrative NCOS level -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Check
> User NCOS level -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Checking
> URI '@127.0.0.1 <http://127.0.0.1>' and CLI '<null>' against block out
> lists -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Admin
> caller block mode is 'open' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Caller
> block mode is 'open' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Call to
> unknown user -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>:
> Accounting failed request for uuid '0' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Setting
> acc source-leg for uuid '0':
> '0|2786XXXXXXX|<myUpstreamProviderIP>|086XXXXXXX|||<null>|||0|call|<myUpstreamProviderIP>|1379538956.820574'
> -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2653]: INFO: <script>: Setting
> acc destination-leg for uuid '0':
> '0|||<null>|<null>|0|<null>|127.0.0.1|<null>|127.0.0.1' -
> R=sip:127.0.0.1;r2=on;lr=on;ftag=49E8355A-523A18060008DB67-B1DA1700;ngcplb=yes
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2659]: INFO: <script>: New
> request - M=ACK R=sip:<mysipserverIP>:5060
> F=sip:2786XXXXXXX@<myUpstreamProviderIP> T=sip:27XXXXX2533 at mysipdns
> IP=<myUpstreamProviderIP>:5060 (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd_b2b-1
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2651]: INFO: <script>: NAT-Reply
> - S=200 - OK M=INVITE IP=127.0.0.1:5080 <http://127.0.0.1:5080>
> (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2651]: INFO: <script>: Remove
> existing ICE candidates (if any) for callee -
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:56 spce /usr/sbin/kamailio[2651]: INFO: <script>: Use
> mediaproxy for backward direction - ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:57 spce /usr/sbin/kamailio[2648]: INFO: <script>: NAT-Reply
> - S=200 - OK M=INVITE IP=127.0.0.1:5080 <http://127.0.0.1:5080>
> (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:57 spce /usr/sbin/kamailio[2648]: INFO: <script>: Remove
> existing ICE candidates (if any) for callee -
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:57 spce /usr/sbin/kamailio[2648]: INFO: <script>: Use
> mediaproxy for backward direction - ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:59 spce /usr/sbin/kamailio[2647]: INFO: <script>: NAT-Reply
> - S=200 - OK M=INVITE IP=127.0.0.1:5080 <http://127.0.0.1:5080>
> (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:59 spce /usr/sbin/kamailio[2647]: INFO: <script>: Remove
> existing ICE candidates (if any) for callee -
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:15:59 spce /usr/sbin/kamailio[2647]: INFO: <script>: Use
> mediaproxy for backward direction - ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2648]: INFO: <script>: New
> request - M=ACK R=sip:<myclientIP>:5060
> F=sip:086XXXXXXX@<mysipserverIP>:5060 T=sip:27XXXXX2533 at mysipdns
> IP=127.0.0.1:5080 <http://127.0.0.1:5080> (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2657]: INFO: <script>: New
> request - M=BYE R=sip:<myclientIP>:5060
> F=sip:086XXXXXXX@<mysipserverIP>:5060 T=sip:27XXXXX2533 at mysipdns
> IP=127.0.0.1:5080 <http://127.0.0.1:5080> (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2657]: INFO: <script>: Stop
> mediaproxy for all branches - R=sip:<myclientIP>:5060
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2648]: INFO: <script>: Relaying
> request,
> du='sip:127.0.0.1;r2=on;lr=on;ftag=acfc5ab0-0-13c4-55013-bd-5bb91ef2-bd;ngcplb=yes'
> - R=sip:<myclientIP>:5060 ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2657]: INFO: <script>: Relaying
> request,
> du='sip:127.0.0.1;r2=on;lr=on;ftag=acfc5ab0-0-13c4-55013-bd-5bb91ef2-bd;ngcplb=yes'
> - R=sip:<myclientIP>:5060 ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2649]: INFO: <script>: New
> request - M=BYE R=sip:127.0.0.1:5080 <http://127.0.0.1:5080>
> F=sip:TN001FAX T=sip:086XXXXXXX@<mysipserverIP>:5060
> IP=<myclientIP>:5060 (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2649]: INFO: <script>: Stop
> mediaproxy for all branches - R=sip:127.0.0.1:5080
> <http://127.0.0.1:5080> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2649]: INFO: <script>: Relaying
> request, du='<null>' - R=sip:127.0.0.1:5080 <http://127.0.0.1:5080>
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2655]: INFO: <script>: NAT-Reply
> - S=200 - OK M=BYE IP=<myclientIP>:5060 (127.0.0.1:5080
> <http://127.0.0.1:5080>) ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> Sep 18 23:16:28 spce /usr/sbin/kamailio[2647]: INFO: <script>: NAT-Reply
> - S=200 - OK M=BYE IP=127.0.0.1:5080 <http://127.0.0.1:5080>
> (127.0.0.1:5060 <http://127.0.0.1:5060>)
> ID=acebb4d0-0-13c4-55013-bd-1a5a4d0c-bd
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> http://lists.sipwise.com/listinfo/spce-user
> 
>  
> 
>  
> 
>  
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> http://lists.sipwise.com/listinfo/spce-user
> 
>  
> 
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
> 




More information about the Spce-user mailing list