[Spce-user] B2BUA registration 2 pbx

[Rogier Banis]

I don't see any outbound requests. When i start up my soft phone i only see inbound request see the log:

Sep 27 14:23:59 sbc-1 lb[3894]: NOTICE: <script>: Relaying request, du='sip:127.0.0.1:5062', fs='udp:127.0.0.1:5060' - R=sip:sbc.callpacity.net ID=En6J9OIDIOnQlvgtbXV6n3CaoKD3TRkZ
Sep 27 14:23:59 sbc-1 lb[3921]: NOTICE: <script>: Reply from Inbound - S=100 - Trying M=REGISTER IP=udp:127.0.0.1:5062 ID=En6J9OIDIOnQlvgtbXV6n3CaoKD3TRkZ
Sep 27 14:23:59 sbc-1 lb[3921]: NOTICE: <script>: Sending reply, fs='udp:89.146.36.220:5060' - ID=En6J9OIDIOnQlvgtbXV6n3CaoKD3TRkZ
Sep 27 14:23:59 sbc-1 lb[3918]: NOTICE: <script>: Reply from Inbound - S=200 - OK M=REGISTER IP=udp:127.0.0.1:5062 ID=En6J9OIDIOnQlvgtbXV6n3CaoKD3TRkZ
Sep 27 14:23:59 sbc-1 lb[3918]: NOTICE: <script>: Sending reply, fs='udp:89.146.36.220:5060' - ID=En6J9OIDIOnQlvgtbXV6n3CaoKD3TRkZ
Sep 27 14:24:03 sbc-1 lb[3909]: NOTICE: <script>: New request - M=OPTIONS R=sip:nagios at voip.sipwise.local F=sip:sipsak at 89.146.36.220:8778 T=sip:nagios at voip.sipwise.local IP=udp:127.0.0.1:8778 ID=1790915563 at 89.146.36.220


Op 27 sep. 2013, om 13:59 heeft Andreas Granig <agranig at sipwise.com> het volgende geschreven:

> Hi,
> 
> On 09/27/2013 01:44 PM, Rogier Banis wrote:
>> I have a thing what i do not understand. I have downloaded and installed v3.0. Everything seems to work great. I added Company and subscriber and this subscriber has to register against our traditional ip-pbx and these settings i added to the subscriber under Subscriber -> Preferences -> Remote Authentication. This all goes well. What i have noticed is that i am able to place a call via the old PBX to another internal phone (directly registered to old PBX). When i look in the registrations of my old PBX the subscriber who comes in through the  sip wise SBC is not registered. So another phone connected to the old PBX is not able to call me since the PBX says that i am not registered.
>> Apparently the registration is on a per outgoing call basis.
>> 
>> Can you guys enlighten me on this? I would really like to know if this is default behavior or did i miss some setting? In the Remote Authentication part of the subscriber i filled in the user, pass, realm and checked the box peer_auth_register.
> 
> Did you enable the peer_auth_register flag for this subscriber (beside setting peer_auth_user/pass/realm)? Do you see any "Outbound Register request from b2bua" in the kamailio-lb logs?
> 
> Andreas
> 
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user