[Spce-user] having trouble with provisioning jitsi on mr3.2.1

chymian chymian at gmx.net
Thu Apr 3 06:53:10 EDT 2014


thanks andreas, that helped.

and yes, I noticed that the skype-like-howto is a bit aged, but for getting my hands on your great software, I was looking for a howto for a federated sip setup – since this train is accelerating fast – and this was the closest I found. 
It would be nice, if sipwise could update this, or write an federated sip howto – there is a big demand out there (not only since M$ took over skype).
i.e. I will integrate FS, video conferences, WebRTC, etc. in my websites (project-mgmt & collaboration/social/group-sites) since I consider it a must for an state-of-the-art collaboration-site. and not all the services will be given away free, so, there is the potential to be a future customer of yours, needing billing & prepaid services.

in that light, I loved the ”tv over webrtc" blog, but again, just a white paper, and no howto. I know, you as company have to make money and want/have to sell your solutions & expertise – on the other hand, the more you give, the more you will get back. especially in the OSS world, it’s easy to to make yourself an good name and state your quality (look at debian) and generate money out of being known widely. and the big point, activate even more community and harvest the synergy.

since a couple of weeks, since I was looking at federated sip (kicked of by danial pocock’s fed. sip blog for debian) I found all types of solutions, but sipwise didn’t appear on my radar just till the end of my search – after 4 weeks. and that, while I was looking exactly for a solution like yours… 
jitsi was all over the place – they have sexy solutions, well documented and a big community, flooding the interested ones with a lot of howtos.

as an newcomer to the "roll your own VoIP-service” world, my impression so far: sipwise has a really great solution, but doesn’t give information and howtos to the community willingly, holding back a lot of “sexy” possible solutions (why?) and therefore not attracting a lot of people, not drawing a lot of attention towards themselves.
in my impression, you appear as a specialized business company, who’s "only" interest is, to sell expertise & solutions and also “have a OSS” version, for the very interested ones, who are willing and can afford to spent very much time to dig in and set up even the easiest solutions. I'm aware, that the SIP/telephony-business is a complicated one, but not everybody want to be a full blown telco… and in my opinion, sipwise has the possibility to be both, a full blown telco-specialist and an easy to go, fed. sip provider for the “masses” - if you want that to be that, and not leave that marketshare to jitsi, sipexecs, a.o. (which is doing the right thing, in integrating it’s self in clearos and do have a lot of howtos at hand)

so on my wish list would be a debian based, zentyal.org style SMB-server, with integrated fed. SIP, webRTC & videoconferences, (running on docker.io containers), a little bit like /http://suite.tiki.org/[1] is doing it on centOS (w/o docker). or you even could team up with univention, for the money-market…


just my 2 cent

und danke für sipwise:CE!

guenter



PS: the URL has an typo, and for the mail-archive:
https://your-ip:1443/device/autoprov/static/jitsi?user=${username}&pass=${password}&uuid=${uuid}




Am Mittwoch, 2. April 2014, 11:23:08 schrieb Andreas Granig:
> Hi,
> 
> The post you're referring to is pretty old and not up-to-date anymore,
> the URL you should try is:
> 
> https://your-ip:1443/device/autoprov/static/jitsi?user=${username}&pass=b${password}&uuid=${uuid}
> 
> Andreas
> 
> On 04/02/2014 10:49 AM, günter wrote:
> > BUMP
> > 
> > anyone? please!
> > 
> > Am Dienstag, 1. April 2014, 01:12:28 schrieb chymian:
> >> hey,
> >>
> >> fairly new to sipwise, I could need some advice here on provisioning.
> >>
> >> the setup is mr3.2.1 with the “skype-like-howto” /http://www.sipwise.com/news/technical/byov-skype-replacement//[1]
> >>
> >> A) fresh-install on a virtual machine with a cloudserver jiffybox.de
> >> B) used the vagrant file to UP a testmachine - just as reverence.
> >>
> >> on both occasions, the jitsi client fails to provision itself.
> >>
> >> updated jitsi already from debian version 2.4.4997-1 to the latest nightly: 2.5.5168-1
> >> on my workstation: debian jessie
> >>
> >>
> >>
> >> 1.) when using the URL: https://192.168.0.122/jitsi?user=${username}&pass=${password}&uuid=${uuid} (IP changed)
> >> 	the jitsi config get’s the first http-page from the self-care web-interface included. :(
> >>
> >>
> >>
> >>
> >> 2.) when I use the same URL with the provisioning port 2443, I get an err.-msg. in /var/log/ngcp/oss.log
> >> https://192.168.0.122:2443/jitsi?user=${username}&pass=${password}&uuid=${uuid}
> >>
> >> Apr  1 00:54:47 spce apache2[6535]: [info] [client 192.168.44.1] Connection to child 0 established (server myserver:443)
> >> Apr  1 00:54:47 spce apache2[6535]: [info] Seeding PRNG with 656 bytes of entropy
> >> Apr  1 00:54:57 spce apache2[6535]: [info] Initial (No.1) HTTPS request received for child 0 (server myserver:443)
> >> Apr  1 00:54:57 spce apache2[6535]: [error] [client 192.168.44.1] File does not exist: /var/www/jitsi
> >> Apr  1 00:54:57 spce oss: 192.168.44.1 - - [01/Apr/2014:00:54:57 +0200] "POST /jitsi HTTP/1.1" 404 1290 "-" "Jitsi/2.5.5168"
> >> Apr  1 00:55:02 spce apache2[6535]: [info] [client 192.168.44.1] (70007)The timeout specified has expired: SSL input filter read failed.
> >> Apr  1 00:55:02 spce apache2[6535]: [info] [client 192.168.44.1] Connection closed to child 0 with standard shutdown (server myserver:443)
> >>
> >>
> >> it’s the same game on both hosts.
> >> no account is created an it starts with the account-wizzard.
> >>
> >> do I miss something?
> >> how is that supposed to work?
> >>
> >> ANY help appreciated
> >> TIA
> >> günter
> >>
> >> --------
> >> [1] http://www.sipwise.com/news/technical/byov-skype-replacement/
> > 
> > 
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com
> > http://lists.sipwise.com/listinfo/spce-user
> > 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user


--------
[1] http://suite.tiki.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20140403/10ac15b2/attachment.html>


More information about the Spce-user mailing list