[Spce-user] Use subscriber name as contact for incoming calls

Daniel Grotti dgrotti at sipwise.com
Mon Apr 7 10:28:01 EDT 2014


Hi Martin,
problem is that Auth-user is empty because this is a call from PSTN, so
PAI is not set.

outbound_pai_user=Authentication User

means caller Authentication User.

Daniel




On 04/07/2014 04:16 PM, Martin Stix wrote:
> No
> 
> 
> mit freundlichen Grüßen
> best regards
> Martin Stix
> CEO
> pluteus communication solutions
> ms at pluteus.at
> www.pluteus.at
> Dampfsägestraße 17
> 3300 Amstetten
> Austria
> tel.: +43 7472 28165 20
> fax.: +43 7472 28165 22
> 
> -----Ursprüngliche Nachricht-----
> Von: Daniel Grotti [mailto:dgrotti at sipwise.com] 
> Gesendet: Montag, 07. April 2014 16:18
> An: Martin Stix
> Cc: spce-user at lists.sipwise.com
> Betreff: Re: AW: AW: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name as contact for incoming calls
> 
> Hi Martin,
> do you have CLIR set to user 4374722816520 ?
> 
> Daniel
> 
> 
> On 04/07/2014 04:05 PM, Martin Stix wrote:
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: New request - 
>> M=INVITE R=sip:4374722816520 at 213.208.150.186 
>> F=sip:+436641282435 at sip.siproute.at 
>> T=sip:4374722816520 at sip.siproute.at IP=5.83.133.52:5060 
>> (127.0.0.1:5060) ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Call from PSTN - 
>> R=sip:4374722816520 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: User-Provided CLI 
>> '+436641282435' taken from From-User - 
>> R=sip:4374722816520 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Network-Provided 
>> CLI '+436641282435' taken from From-User - 
>> R=sip:4374722816520 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting 
>> user-provided CLI '+436641282435' to '436641282435' - 
>> R=sip:4374722816520 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting 
>> network-provided CLI '+436641282435' to '436641282435' - 
>> R=sip:4374722816520 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
>> '436641282435 at sip.siproute.at' as initiating user-provided CLI - 
>> R=sip:4374722816520 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
>> '436641282435 at sip.siproute.at' as initiating network-provided CLI - 
>> R=sip:4374722816520 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Callee was aliased 
>> with extension '43747228165' - R=sip:pluteuspbx02 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Callee is local, 
>> uuid='913b4fd7-0d9b-4e85-bd9d-5256c39967b7' - 
>> R=sip:pluteuspbx02 at 213.208.150.186 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting acc 
>> source-leg for uuid '0': 
>> '0|+436641282435|5.83.133.52|436641282435|||0|||0|call|5.83.133.52|139
>> 6879386.817402' - 
>> R=sip:pluteuspbx02 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting acc 
>> destination-leg for uuid '913b4fd7-0d9b-4e85-bd9d-5256c39967b7': 
>> '0|||5|4374722816520|913b4fd7-0d9b-4e85-bd9d-5256c39967b7|pluteuspbx02
>> |213.208.150.186|4374722816520|213.208.150.186' - 
>> R=sip:pluteuspbx02 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Using full 
>> extensioned alias as user - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting first 
>> user-provided CLI '436641282435' to '06641282435' - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting first 
>> network-provided CLI '436641282435' to '06641282435' - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
>> caller_cli_userprov/caller_domain_userprov 
>> '06641282435 at 213.208.150.186' for upn - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting From to 
>> '<sip:06641282435 at 213.208.150.186>' - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
>> P-Called-Party-ID '<sip:4374722816520 at 213.208.150.186>' - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Appending P-D-URI 
>> 'sip:lb at 127.0.0.1;lr;socket=sip:10.4.220.8:5060' - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Forcing request 
>> via B2BUA 'sip:127.0.0.1:5080' - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Request leaving 
>> server, D-URI='sip:127.0.0.1:5080' - 
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:06 spce proxy[4010]: NOTICE: <script>: NAT-Reply - S=100 
>> - Connecting M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080) 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:07 spce proxy[4013]: NOTICE: <script>: NAT-Reply - S=180 
>> - Ringing M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080) 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>> Apr  7 16:03:09 spce proxy[4011]: NOTICE: <script>: NAT-Reply - S=200 
>> - OK M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080) 
>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>
>>
>> mit freundlichen Grüßen
>> best regards
>> Martin Stix
>> CEO
>> pluteus communication solutions
>> ms at pluteus.at
>> www.pluteus.at
>> Dampfsägestraße 17
>> 3300 Amstetten
>> Austria
>> tel.: +43 7472 28165 20
>> fax.: +43 7472 28165 22
>>
>> -----Ursprüngliche Nachricht-----
>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>> Gesendet: Montag, 07. April 2014 13:15
>> An: Martin Stix
>> Cc: spce-user at lists.sipwise.com
>> Betreff: Re: AW: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name 
>> as contact for incoming calls
>>
>> Hi Martin,
>> so from PSTN to sub call, you should set the outbound_pai_user in subscriber preferences.
>>
>> Please share your kamailio-proxy.log to see what happens.
>>
>> Daniel
>>
>>
>>
>>
>>
>> On 04/07/2014 12:17 PM, Martin Stix wrote:
>>> Hi!
>>>
>>> It's just wanted for incoming calls from pstn(peering) to subscribers.
>>>
>>> regards
>>>
>>>
>>> mit freundlichen Grüßen
>>> best regards
>>> Martin Stix
>>> CEO
>>> pluteus communication solutions
>>> ms at pluteus.at
>>> www.pluteus.at
>>> Dampfsägestraße 17
>>> 3300 Amstetten
>>> Austria
>>> tel.: +43 7472 28165 20
>>> fax.: +43 7472 28165 22
>>>
>>> -----Ursprüngliche Nachricht-----
>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>> Gesendet: Montag, 07. April 2014 12:16
>>> An: Martin Stix
>>> Cc: spce-user at lists.sipwise.com
>>> Betreff: Re: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name as 
>>> contact for incoming calls
>>>
>>> Hi,
>>> If you need to call another subscriber (A call B), then you should set the subscriber's preference outbound_pai_user on B.
>>>
>>> If you want to call outbound (sip trunk) you have to set that value in sip peering.
>>>
>>> Daniel
>>>
>>>
>>>
>>> On 04/07/2014 12:10 PM, Martin Stix wrote:
>>>> Hi!
>>>>
>>>>  
>>>>
>>>> But here I have set UPRN if available or NPN. Isn't that just for 
>>>> outgoing calls from subscriber to pstn?
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> mit freundlichen Grüßen
>>>>
>>>> best regards
>>>>
>>>> Martin Stix
>>>>
>>>> CEO
>>>>
>>>> pluteus communication solutions
>>>>
>>>> ms at pluteus.at
>>>>
>>>> www.pluteus.at
>>>>
>>>> Dampfsägestraße 17
>>>>
>>>> 3300 Amstetten
>>>>
>>>> Austria
>>>>
>>>> tel.: +43 7472 28165 20
>>>>
>>>> fax.: +43 7472 28165 22
>>>>
>>>>  
>>>>
>>>> -----Ursprüngliche Nachricht-----
>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>> Gesendet: Montag, 07. April 2014 12:10
>>>> An: Martin Stix
>>>> Cc: spce-user at lists.sipwise.com
>>>> Betreff: Re: AW: AW: AW: AW: [Spce-user] Use subscriber name as 
>>>> contact for incoming calls
>>>>
>>>>  
>>>>
>>>> Hi,
>>>>
>>>> Ah, no, you should set the Peering preferences not subscriber.
>>>>
>>>>  
>>>>
>>>> Daniel
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> On 04/07/2014 12:08 PM, Daniel Grotti wrote:
>>>>
>>>>> Hi Martin,
>>>>
>>>>> can you provide the kamailio-proxy.log fro this callid ?
>>>>
>>>>>
>>>>
>>>>> Daniel
>>>>
>>>>>
>>>>
>>>>>
>>>>
>>>>>
>>>>
>>>>> On 04/07/2014 12:00 PM, Martin Stix wrote:
>>>>
>>>>>> Hi Daniel!
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> I've set the subscriber outbound pai user to authentication user
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> In Wireshark on my PBX I don't see PAI coming.
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> Tried to call from my mobile to my pbx.
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> Regards
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> mit freundlichen Grüßen
>>>>
>>>>>>
>>>>
>>>>>> best regards
>>>>
>>>>>>
>>>>
>>>>>> Martin Stix
>>>>
>>>>>>
>>>>
>>>>>> CEO
>>>>
>>>>>>
>>>>
>>>>>> pluteus communication solutions
>>>>
>>>>>>
>>>>
>>>>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>> www.pluteus.at <http://www.pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>> Dampfsägestraße 17
>>>>
>>>>>>
>>>>
>>>>>> 3300 Amstetten
>>>>
>>>>>>
>>>>
>>>>>> Austria
>>>>
>>>>>>
>>>>
>>>>>> tel.: +43 7472 28165 20
>>>>
>>>>>>
>>>>
>>>>>> fax.: +43 7472 28165 22
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> -----Ursprüngliche Nachricht-----
>>>>
>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>
>>>>>> Gesendet: Montag, 07. April 2014 11:42
>>>>
>>>>>> An: Martin Stix
>>>>
>>>>>> Cc: spce-user at lists.sipwise.com
>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>
>>>>>> Betreff: Re: AW: AW: AW: [Spce-user] Use subscriber name as 
>>>>>> contact
>>>>
>>>>>> for incoming calls
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> Hi Martin,
>>>>
>>>>>>
>>>>
>>>>>> we currently do not set RPID header for outbound calls, we can 
>>>>>> just
>>>>
>>>>>> read an RPID header for incoming calls setting inbound_upn or
>>>> inbound_npn.
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> What you can use is the PAI, you can set the "outbound_pai_user"
>>>>
>>>>>> value in SIP Peering/Subscriber Preferences.
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> Daniel
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>
>>>>
>>>>>> On 04/07/2014 11:21 AM, Martin Stix wrote:
>>>>
>>>>>>
>>>>
>>>>>>> Hi!
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> Could I use Remote Party ID for that, and if yes, how?
>>>>
>>>>>>
>>>>
>>>>>>> I don't mind the place where subscriber ID is being sent, except
>>>>
>>>>>>> from
>>>>
>>>>>> user part.
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> Thanks
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> mit freundlichen Grüßen
>>>>
>>>>>>
>>>>
>>>>>>> best regards
>>>>
>>>>>>
>>>>
>>>>>>> Martin Stix
>>>>
>>>>>>
>>>>
>>>>>>> CEO
>>>>
>>>>>>
>>>>
>>>>>>> pluteus communication solutions
>>>>
>>>>>>
>>>>
>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>> Dampfsägestraße 17
>>>>
>>>>>>
>>>>
>>>>>>> 3300 Amstetten
>>>>
>>>>>>
>>>>
>>>>>>> Austria
>>>>
>>>>>>
>>>>
>>>>>>> tel.: +43 7472 28165 20
>>>>
>>>>>>
>>>>
>>>>>>> fax.: +43 7472 28165 22
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> -----Ursprüngliche Nachricht-----
>>>>
>>>>>>
>>>>
>>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>
>>>>>>
>>>>
>>>>>>> Gesendet: Dienstag, 01. April 2014 12:08
>>>>
>>>>>>
>>>>
>>>>>>> An: Martin Stix
>>>>
>>>>>>
>>>>
>>>>>>> Cc: spce-user at lists.sipwise.com
>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>> <mailto:spce-user at lists.sipwise.com>
>>>>
>>>>>>
>>>>
>>>>>>> Betreff: Re: AW: AW: [Spce-user] Use subscriber name as contact 
>>>>>>> for
>>>>
>>>>>>
>>>>
>>>>>>> incoming calls
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> Hi Martin,
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> this is something you can't achieve.
>>>>
>>>>>>
>>>>
>>>>>>> It's not the contact the header to use as source identifier, but
>>>>
>>>>>>> From
>>>>
>>>>>> or P-Asserted-Identity.
>>>>
>>>>>>
>>>>
>>>>>>> Contact header can't be changed.
>>>>
>>>>>>
>>>>
>>>>>>> Contact header is used as RURI in ACK and BYE, so if you change 
>>>>>>> that
>>>>
>>>>>> that messeges will be sent to the wrong URI. They must be sent 
>>>>>> back
>>>>
>>>>>> to NGCP LB.
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> Daniel
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>> On 04/01/2014 12:02 PM, Martin Stix wrote:
>>>>
>>>>>>
>>>>
>>>>>>>> Hi!
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>> Sorry, other way round, I have a 3CX PBX registered as 
>>>>>>>> subscriber
>>>>
>>>>>>>> on
>>>>
>>>>>> sipwise.
>>>>
>>>>>>
>>>>
>>>>>>>> When a call is made from PSTN to Sipwise to 3CX PBX it would be
>>>>
>>>>>>>> great
>>>>
>>>>>> to have the contact of the subscriber in contact field, and not ngcp-lb.
>>>>
>>>>>>
>>>>
>>>>>>>> So it makes live easier for us writing templates for 3CX and 
>>>>>>>> roll
>>>>
>>>>>>>> it
>>>>
>>>>>> out to customers, because 3CX accepts the call in that case 
>>>>>> without
>>>>
>>>>>> having the customer doing some source identifiers and stuff in the 3CX.
>>>>
>>>>>> It is mainly because one customer on one subscriber can have more
>>>>
>>>>>> than 1 number. So we use the contact as source identifier.
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>> regards
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>> mit freundlichen Grüßen
>>>>
>>>>>>
>>>>
>>>>>>>> best regards
>>>>
>>>>>>
>>>>
>>>>>>>> Martin Stix
>>>>
>>>>>>
>>>>
>>>>>>>> CEO
>>>>
>>>>>>
>>>>
>>>>>>>> pluteus communication solutions
>>>>
>>>>>>
>>>>
>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>>> Dampfsägestraße 17
>>>>
>>>>>>
>>>>
>>>>>>>> 3300 Amstetten
>>>>
>>>>>>
>>>>
>>>>>>>> Austria
>>>>
>>>>>>
>>>>
>>>>>>>> tel.: +43 7472 28165 20
>>>>
>>>>>>
>>>>
>>>>>>>> fax.: +43 7472 28165 22
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>> -----Ursprüngliche Nachricht-----
>>>>
>>>>>>
>>>>
>>>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>
>>>>>>
>>>>
>>>>>>>> Gesendet: Dienstag, 01. April 2014 11:57
>>>>
>>>>>>
>>>>
>>>>>>>> An: spce-user at lists.sipwise.com
>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>
>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>
>>>>>>
>>>>
>>>>>>>> Cc: Martin Stix
>>>>
>>>>>>
>>>>
>>>>>>>> Betreff: Re: AW: [Spce-user] Use subscriber name as contact for
>>>>
>>>>>>
>>>>
>>>>>>>> incoming calls
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>> Hi Martin,
>>>>
>>>>>>
>>>>
>>>>>>>> if you want to authenticate incoming calls from a sip trunk
>>>>
>>>>>> (something we don't do) you have to register your siptrunk as
>>>>
>>>>>> subscriber on NGCP.
>>>>
>>>>>>
>>>>
>>>>>>>> We don't authenticate incoming calls from Peering servers.
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>> Daniel
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>> On 03/31/2014 05:54 PM, Martin Stix wrote:
>>>>
>>>>>>
>>>>
>>>>>>>>> Hi Daniel!
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> It just would be nice to authenticate incoming calls via this
>>>>
>>>>>> contact, in case of siptrunks with more than one main number, 
>>>>>> instead
>>>>
>>>>>> of using IP or domain on pbx's.
>>>>
>>>>>>
>>>>
>>>>>>>>> Would there be a way?
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> Regards
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> mit freundlichen Grüßen
>>>>
>>>>>>
>>>>
>>>>>>>>> best regards
>>>>
>>>>>>
>>>>
>>>>>>>>> Martin Stix
>>>>
>>>>>>
>>>>
>>>>>>>>> CEO
>>>>
>>>>>>
>>>>
>>>>>>>>> pluteus communication solutions
>>>>
>>>>>>
>>>>
>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>>>> Dampfsägestraße 17
>>>>
>>>>>>
>>>>
>>>>>>>>> 3300 Amstetten
>>>>
>>>>>>
>>>>
>>>>>>>>> Austria
>>>>
>>>>>>
>>>>
>>>>>>>>> tel.: +43 7472 28165 20
>>>>
>>>>>>
>>>>
>>>>>>>>> fax.: +43 7472 28165 22
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> -----Ursprüngliche Nachricht-----
>>>>
>>>>>>
>>>>
>>>>>>>>> Von: spce-user-bounces at lists.sipwise.com
>>>> <mailto:spce-user-bounces at lists.sipwise.com>
>>>>
>>>>>> <mailto:spce-user-bounces at lists.sipwise.com>
>>>>
>>>>>>
>>>>
>>>>>>>>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von 
>>>>>>>>> Daniel
>>>>
>>>>>>
>>>>
>>>>>>>>> Grotti
>>>>
>>>>>>
>>>>
>>>>>>>>> Gesendet: Freitag, 07. Februar 2014 13:21
>>>>
>>>>>>
>>>>
>>>>>>>>> An: spce-user at lists.sipwise.com 
>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>
>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>
>>>>>>
>>>>
>>>>>>>>> Betreff: Re: [Spce-user] Use subscriber name as contact for
>>>>
>>>>>>>>> incoming
>>>>
>>>>>>
>>>>
>>>>>>>>> calls
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> Hi,
>>>>
>>>>>>
>>>>
>>>>>>>>> you shouldn't touch that contact, there is no need to change 
>>>>>>>>> the
>>>>
>>>>>> username, cause that's the username/contact of LB.
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> Daniel
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> On 02/07/2014 10:19 AM, Martin Stix wrote:
>>>>
>>>>>>
>>>>
>>>>>>>>>> Hi!
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> How can I change incoming contact for calls going to 
>>>>>>>>>> subscribers
>>>>
>>>>>>>>>> to
>>>>
>>>>>>
>>>>
>>>>>>>>>> use the subscriber name instead of ngcp-lb?
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> Thanks
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> mit freundlichen Grüßen
>>>>
>>>>>>
>>>>
>>>>>>>>>> best regards
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> *Martin Stix*
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> CEO
>>>>
>>>>>>
>>>>
>>>>>>>>>> pluteus communication solutions
>>>>
>>>>>>
>>>>
>>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>> <mailto:ms at pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> Dampfsägestraße 17
>>>>
>>>>>>
>>>>
>>>>>>>>>> 3300 Amstetten
>>>>
>>>>>>
>>>>
>>>>>>>>>> Austria
>>>>
>>>>>>
>>>>
>>>>>>>>>> tel.: +43 7472 28165 20
>>>>
>>>>>>
>>>>
>>>>>>>>>> fax.: +43 7472 28165 22
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>> _______________________________________________
>>>>
>>>>>>
>>>>
>>>>>>>>>> Spce-user mailing list
>>>>
>>>>>>
>>>>
>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>
>>>>>>
>>>>
>>>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>
>>>>>>
>>>>
>>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>
>>>>>>>>> _______________________________________________
>>>>
>>>>>>
>>>>
>>>>>>>>> Spce-user mailing list
>>>>
>>>>>>
>>>>
>>>>>>>>> Spce-user at lists.sipwise.com 
>>>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>
>>>>>>
>>>>
>>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>
>>>>>>
>>>>
>>>>>>>>>
>>>>
>>>>>>
>>>>




More information about the Spce-user mailing list