[Spce-user] Use subscriber name as contact for incoming calls

[Daniel Grotti]

Hi Martin,

this is something you can't achieve.
It's not the contact the header to use as source identifier, but From or
P-Asserted-Identity.
Contact header can't be changed.
Contact header is used as RURI in ACK and BYE, so if you change that
that messeges will be sent to the wrong URI. They must be sent back to
NGCP LB.

Daniel






On 04/01/2014 12:02 PM, Martin Stix wrote:
> Hi!
> 
> Sorry, other way round, I have a 3CX PBX registered as subscriber on sipwise.
> When a call is made from PSTN to Sipwise to 3CX PBX it would be great to have the contact of the subscriber in contact field, and not ngcp-lb.
> So it makes live easier for us writing templates for 3CX and roll it out to customers, because 3CX accepts the call in that case without having the customer doing some source identifiers and stuff in the 3CX. It is mainly because one customer on one subscriber can have more than 1 number. So we use the contact as source identifier.
> 
> regards
> 
> 
> mit freundlichen Grüßen
> best regards
> Martin Stix
> CEO
> pluteus communication solutions
> ms at pluteus.at
> www.pluteus.at
> Dampfsägestraße 17
> 3300 Amstetten
> Austria
> tel.: +43 7472 28165 20
> fax.: +43 7472 28165 22
> 
> -----Ursprüngliche Nachricht-----
> Von: Daniel Grotti [mailto:dgrotti at sipwise.com] 
> Gesendet: Dienstag, 01. April 2014 11:57
> An: spce-user at lists.sipwise.com
> Cc: Martin Stix
> Betreff: Re: AW: [Spce-user] Use subscriber name as contact for incoming calls
> 
> Hi Martin,
> if you want to authenticate incoming calls from a sip trunk (something we don't do) you have to register your siptrunk as subscriber on NGCP.
> We don't authenticate incoming calls from Peering servers.
> 
> Daniel
> 
> 
> 
> 
> 
> 
> 
> On 03/31/2014 05:54 PM, Martin Stix wrote:
>> Hi Daniel!
>>
>> It just would be nice to authenticate incoming calls via this contact, in case of siptrunks with more than one main number, instead of using IP or domain on pbx's.
>> Would there be a way?
>>
>> Regards
>>
>>
>> mit freundlichen Grüßen
>> best regards
>> Martin Stix
>> CEO
>> pluteus communication solutions
>> ms at pluteus.at
>> www.pluteus.at
>> Dampfsägestraße 17
>> 3300 Amstetten
>> Austria
>> tel.: +43 7472 28165 20
>> fax.: +43 7472 28165 22
>>
>> -----Ursprüngliche Nachricht-----
>> Von: spce-user-bounces at lists.sipwise.com 
>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von Daniel 
>> Grotti
>> Gesendet: Freitag, 07. Februar 2014 13:21
>> An: spce-user at lists.sipwise.com
>> Betreff: Re: [Spce-user] Use subscriber name as contact for incoming 
>> calls
>>
>> Hi,
>> you shouldn't touch that contact, there is no need to change the username, cause that's the username/contact of LB.
>>
>> Daniel
>>
>>
>> On 02/07/2014 10:19 AM, Martin Stix wrote:
>>> Hi!
>>>
>>>  
>>>
>>> How can I change incoming contact for calls going to subscribers to 
>>> use the subscriber name instead of ngcp-lb?
>>>
>>>  
>>>
>>>  
>>>
>>> Thanks
>>>
>>>  
>>>
>>>  
>>>
>>> mit freundlichen Grüßen
>>> best regards
>>>
>>> *Martin Stix*
>>>
>>> CEO
>>> pluteus communication solutions
>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>>
>>> www.pluteus.at
>>>
>>> Dampfsägestraße 17
>>> 3300 Amstetten
>>> Austria
>>> tel.: +43 7472 28165 20
>>> fax.: +43 7472 28165 22
>>>
>>>  
>>>
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> http://lists.sipwise.com/listinfo/spce-user
>>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> http://lists.sipwise.com/listinfo/spce-user
>>