[Spce-user] Use subscriber name as contact for incoming calls
Martin Stix
ms at pluteus.at
Mon Apr 7 06:17:41 EDT 2014
Hi!
It's just wanted for incoming calls from pstn(peering) to subscribers.
regards
mit freundlichen Grüßen
best regards
Martin Stix
CEO
pluteus communication solutions
ms at pluteus.at
www.pluteus.at
Dampfsägestraße 17
3300 Amstetten
Austria
tel.: +43 7472 28165 20
fax.: +43 7472 28165 22
-----Ursprüngliche Nachricht-----
Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
Gesendet: Montag, 07. April 2014 12:16
An: Martin Stix
Cc: spce-user at lists.sipwise.com
Betreff: Re: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name as contact for incoming calls
Hi,
If you need to call another subscriber (A call B), then you should set the subscriber's preference outbound_pai_user on B.
If you want to call outbound (sip trunk) you have to set that value in sip peering.
Daniel
On 04/07/2014 12:10 PM, Martin Stix wrote:
> Hi!
>
>
>
> But here I have set UPRN if available or NPN. Isn't that just for
> outgoing calls from subscriber to pstn?
>
>
>
>
>
>
>
> mit freundlichen Grüßen
>
> best regards
>
> Martin Stix
>
> CEO
>
> pluteus communication solutions
>
> ms at pluteus.at
>
> www.pluteus.at
>
> Dampfsägestraße 17
>
> 3300 Amstetten
>
> Austria
>
> tel.: +43 7472 28165 20
>
> fax.: +43 7472 28165 22
>
>
>
> -----Ursprüngliche Nachricht-----
> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
> Gesendet: Montag, 07. April 2014 12:10
> An: Martin Stix
> Cc: spce-user at lists.sipwise.com
> Betreff: Re: AW: AW: AW: AW: [Spce-user] Use subscriber name as
> contact for incoming calls
>
>
>
> Hi,
>
> Ah, no, you should set the Peering preferences not subscriber.
>
>
>
> Daniel
>
>
>
>
>
> On 04/07/2014 12:08 PM, Daniel Grotti wrote:
>
>> Hi Martin,
>
>> can you provide the kamailio-proxy.log fro this callid ?
>
>>
>
>> Daniel
>
>>
>
>>
>
>>
>
>> On 04/07/2014 12:00 PM, Martin Stix wrote:
>
>>> Hi Daniel!
>
>>>
>
>>>
>
>>>
>
>>> I've set the subscriber outbound pai user to authentication user
>
>>>
>
>>>
>
>>>
>
>>> In Wireshark on my PBX I don't see PAI coming.
>
>>>
>
>>>
>
>>>
>
>>> Tried to call from my mobile to my pbx.
>
>>>
>
>>>
>
>>>
>
>>> Regards
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>> mit freundlichen Grüßen
>
>>>
>
>>> best regards
>
>>>
>
>>> Martin Stix
>
>>>
>
>>> CEO
>
>>>
>
>>> pluteus communication solutions
>
>>>
>
>>> ms at pluteus.at <mailto:ms at pluteus.at>
>
>>>
>
>>> www.pluteus.at <http://www.pluteus.at>
>
>>>
>
>>> Dampfsägestraße 17
>
>>>
>
>>> 3300 Amstetten
>
>>>
>
>>> Austria
>
>>>
>
>>> tel.: +43 7472 28165 20
>
>>>
>
>>> fax.: +43 7472 28165 22
>
>>>
>
>>>
>
>>>
>
>>> -----Ursprüngliche Nachricht-----
>
>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>
>>> Gesendet: Montag, 07. April 2014 11:42
>
>>> An: Martin Stix
>
>>> Cc: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>
>>> Betreff: Re: AW: AW: AW: [Spce-user] Use subscriber name as contact
>
>>> for incoming calls
>
>>>
>
>>>
>
>>>
>
>>> Hi Martin,
>
>>>
>
>>> we currently do not set RPID header for outbound calls, we can just
>
>>> read an RPID header for incoming calls setting inbound_upn or
> inbound_npn.
>
>>>
>
>>>
>
>>>
>
>>> What you can use is the PAI, you can set the "outbound_pai_user"
>
>>> value in SIP Peering/Subscriber Preferences.
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>> Daniel
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>>
>
>>> On 04/07/2014 11:21 AM, Martin Stix wrote:
>
>>>
>
>>>> Hi!
>
>>>
>
>>>>
>
>>>
>
>>>> Could I use Remote Party ID for that, and if yes, how?
>
>>>
>
>>>> I don't mind the place where subscriber ID is being sent, except
>
>>>> from
>
>>> user part.
>
>>>
>
>>>>
>
>>>
>
>>>> Thanks
>
>>>
>
>>>>
>
>>>
>
>>>>
>
>>>
>
>>>> mit freundlichen Grüßen
>
>>>
>
>>>> best regards
>
>>>
>
>>>> Martin Stix
>
>>>
>
>>>> CEO
>
>>>
>
>>>> pluteus communication solutions
>
>>>
>
>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>
>>>
>
>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>
>>>
>
>>>> Dampfsägestraße 17
>
>>>
>
>>>> 3300 Amstetten
>
>>>
>
>>>> Austria
>
>>>
>
>>>> tel.: +43 7472 28165 20
>
>>>
>
>>>> fax.: +43 7472 28165 22
>
>>>
>
>>>>
>
>>>
>
>>>> -----Ursprüngliche Nachricht-----
>
>>>
>
>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>
>>>
>
>>>> Gesendet: Dienstag, 01. April 2014 12:08
>
>>>
>
>>>> An: Martin Stix
>
>>>
>
>>>> Cc: spce-user at lists.sipwise.com
>>>> <mailto:spce-user at lists.sipwise.com>
> <mailto:spce-user at lists.sipwise.com>
>
>>>
>
>>>> Betreff: Re: AW: AW: [Spce-user] Use subscriber name as contact for
>
>>>
>
>>>> incoming calls
>
>>>
>
>>>>
>
>>>
>
>>>> Hi Martin,
>
>>>
>
>>>>
>
>>>
>
>>>> this is something you can't achieve.
>
>>>
>
>>>> It's not the contact the header to use as source identifier, but
>
>>>> From
>
>>> or P-Asserted-Identity.
>
>>>
>
>>>> Contact header can't be changed.
>
>>>
>
>>>> Contact header is used as RURI in ACK and BYE, so if you change
>>>> that
>
>>> that messeges will be sent to the wrong URI. They must be sent back
>
>>> to NGCP LB.
>
>>>
>
>>>>
>
>>>
>
>>>> Daniel
>
>>>
>
>>>>
>
>>>
>
>>>>
>
>>>
>
>>>>
>
>>>
>
>>>>
>
>>>
>
>>>>
>
>>>
>
>>>>
>
>>>
>
>>>> On 04/01/2014 12:02 PM, Martin Stix wrote:
>
>>>
>
>>>>> Hi!
>
>>>
>
>>>>>
>
>>>
>
>>>>> Sorry, other way round, I have a 3CX PBX registered as subscriber
>
>>>>> on
>
>>> sipwise.
>
>>>
>
>>>>> When a call is made from PSTN to Sipwise to 3CX PBX it would be
>
>>>>> great
>
>>> to have the contact of the subscriber in contact field, and not ngcp-lb.
>
>>>
>
>>>>> So it makes live easier for us writing templates for 3CX and roll
>
>>>>> it
>
>>> out to customers, because 3CX accepts the call in that case without
>
>>> having the customer doing some source identifiers and stuff in the 3CX.
>
>>> It is mainly because one customer on one subscriber can have more
>
>>> than 1 number. So we use the contact as source identifier.
>
>>>
>
>>>>>
>
>>>
>
>>>>> regards
>
>>>
>
>>>>>
>
>>>
>
>>>>>
>
>>>
>
>>>>> mit freundlichen Grüßen
>
>>>
>
>>>>> best regards
>
>>>
>
>>>>> Martin Stix
>
>>>
>
>>>>> CEO
>
>>>
>
>>>>> pluteus communication solutions
>
>>>
>
>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>
>>>
>
>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>
>>>
>
>>>>> Dampfsägestraße 17
>
>>>
>
>>>>> 3300 Amstetten
>
>>>
>
>>>>> Austria
>
>>>
>
>>>>> tel.: +43 7472 28165 20
>
>>>
>
>>>>> fax.: +43 7472 28165 22
>
>>>
>
>>>>>
>
>>>
>
>>>>> -----Ursprüngliche Nachricht-----
>
>>>
>
>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>
>>>
>
>>>>> Gesendet: Dienstag, 01. April 2014 11:57
>
>>>
>
>>>>> An: spce-user at lists.sipwise.com
>>>>> <mailto:spce-user at lists.sipwise.com>
>
>>>>> <mailto:spce-user at lists.sipwise.com>
>
>>>
>
>>>>> Cc: Martin Stix
>
>>>
>
>>>>> Betreff: Re: AW: [Spce-user] Use subscriber name as contact for
>
>>>
>
>>>>> incoming calls
>
>>>
>
>>>>>
>
>>>
>
>>>>> Hi Martin,
>
>>>
>
>>>>> if you want to authenticate incoming calls from a sip trunk
>
>>> (something we don't do) you have to register your siptrunk as
>
>>> subscriber on NGCP.
>
>>>
>
>>>>> We don't authenticate incoming calls from Peering servers.
>
>>>
>
>>>>>
>
>>>
>
>>>>> Daniel
>
>>>
>
>>>>>
>
>>>
>
>>>>>
>
>>>
>
>>>>>
>
>>>
>
>>>>>
>
>>>
>
>>>>>
>
>>>
>
>>>>>
>
>>>
>
>>>>>
>
>>>
>
>>>>> On 03/31/2014 05:54 PM, Martin Stix wrote:
>
>>>
>
>>>>>> Hi Daniel!
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> It just would be nice to authenticate incoming calls via this
>
>>> contact, in case of siptrunks with more than one main number,
>>> instead
>
>>> of using IP or domain on pbx's.
>
>>>
>
>>>>>> Would there be a way?
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> Regards
>
>>>
>
>>>>>>
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> mit freundlichen Grüßen
>
>>>
>
>>>>>> best regards
>
>>>
>
>>>>>> Martin Stix
>
>>>
>
>>>>>> CEO
>
>>>
>
>>>>>> pluteus communication solutions
>
>>>
>
>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>
>>>
>
>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>
>>>
>
>>>>>> Dampfsägestraße 17
>
>>>
>
>>>>>> 3300 Amstetten
>
>>>
>
>>>>>> Austria
>
>>>
>
>>>>>> tel.: +43 7472 28165 20
>
>>>
>
>>>>>> fax.: +43 7472 28165 22
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> -----Ursprüngliche Nachricht-----
>
>>>
>
>>>>>> Von: spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>
>
>>> <mailto:spce-user-bounces at lists.sipwise.com>
>
>>>
>
>>>>>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von
>>>>>> Daniel
>
>>>
>
>>>>>> Grotti
>
>>>
>
>>>>>> Gesendet: Freitag, 07. Februar 2014 13:21
>
>>>
>
>>>>>> An: spce-user at lists.sipwise.com
>>>>>> <mailto:spce-user at lists.sipwise.com>
>
>>>>>> <mailto:spce-user at lists.sipwise.com>
>
>>>
>
>>>>>> Betreff: Re: [Spce-user] Use subscriber name as contact for
>
>>>>>> incoming
>
>>>
>
>>>>>> calls
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> Hi,
>
>>>
>
>>>>>> you shouldn't touch that contact, there is no need to change the
>
>>> username, cause that's the username/contact of LB.
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> Daniel
>
>>>
>
>>>>>>
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> On 02/07/2014 10:19 AM, Martin Stix wrote:
>
>>>
>
>>>>>>> Hi!
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> How can I change incoming contact for calls going to subscribers
>
>>>>>>> to
>
>>>
>
>>>>>>> use the subscriber name instead of ngcp-lb?
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> Thanks
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> mit freundlichen Grüßen
>
>>>
>
>>>>>>> best regards
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> *Martin Stix*
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> CEO
>
>>>
>
>>>>>>> pluteus communication solutions
>
>>>
>
>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
> <mailto:ms at pluteus.at>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> Dampfsägestraße 17
>
>>>
>
>>>>>>> 3300 Amstetten
>
>>>
>
>>>>>>> Austria
>
>>>
>
>>>>>>> tel.: +43 7472 28165 20
>
>>>
>
>>>>>>> fax.: +43 7472 28165 22
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>> _______________________________________________
>
>>>
>
>>>>>>> Spce-user mailing list
>
>>>
>
>>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> <mailto:Spce-user at lists.sipwise.com>
>
>>>
>
>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>
>>>
>
>>>>>>>
>
>>>
>
>>>>>>
>
>>>
>
>>>>>> _______________________________________________
>
>>>
>
>>>>>> Spce-user mailing list
>
>>>
>
>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> <mailto:Spce-user at lists.sipwise.com>
>
>>>
>
>>>>>> http://lists.sipwise.com/listinfo/spce-user
>
>>>
>
>>>>>>
>
>>>
>
More information about the Spce-user
mailing list