[Spce-user] Use subscriber name as contact for incoming calls

Mon Apr 7 10:16:27 EDT 2014

No

mit freundlichen Grüßen
best regards
Martin Stix
CEO
pluteus communication solutions
ms at pluteus.at
www.pluteus.at
Dampfsägestraße 17
3300 Amstetten
Austria
tel.: +43 7472 28165 20
fax.: +43 7472 28165 22

-----Ursprüngliche Nachricht-----
Von: Daniel Grotti [mailto:dgrotti at sipwise.com] 
Gesendet: Montag, 07. April 2014 16:18
An: Martin Stix
Cc: spce-user at lists.sipwise.com
Betreff: Re: AW: AW: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name as contact for incoming calls

Hi Martin,
do you have CLIR set to user 4374722816520 ?

Daniel

On 04/07/2014 04:05 PM, Martin Stix wrote:
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: New request - 
> M=INVITE R=sip:4374722816520 at 213.208.150.186 
> F=sip:+436641282435 at sip.siproute.at 
> T=sip:4374722816520 at sip.siproute.at IP=5.83.133.52:5060 
> (127.0.0.1:5060) ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Call from PSTN - 
> R=sip:4374722816520 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: User-Provided CLI 
> '+436641282435' taken from From-User - 
> R=sip:4374722816520 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Network-Provided 
> CLI '+436641282435' taken from From-User - 
> R=sip:4374722816520 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting 
> user-provided CLI '+436641282435' to '436641282435' - 
> R=sip:4374722816520 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting 
> network-provided CLI '+436641282435' to '436641282435' - 
> R=sip:4374722816520 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
> '436641282435 at sip.siproute.at' as initiating user-provided CLI - 
> R=sip:4374722816520 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
> '436641282435 at sip.siproute.at' as initiating network-provided CLI - 
> R=sip:4374722816520 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Callee was aliased 
> with extension '43747228165' - R=sip:pluteuspbx02 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Callee is local, 
> uuid='913b4fd7-0d9b-4e85-bd9d-5256c39967b7' - 
> R=sip:pluteuspbx02 at 213.208.150.186 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting acc 
> source-leg for uuid '0': 
> '0|+436641282435|5.83.133.52|436641282435|||0|||0|call|5.83.133.52|139
> 6879386.817402' - 
> R=sip:pluteuspbx02 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting acc 
> destination-leg for uuid '913b4fd7-0d9b-4e85-bd9d-5256c39967b7': 
> '0|||5|4374722816520|913b4fd7-0d9b-4e85-bd9d-5256c39967b7|pluteuspbx02
> |213.208.150.186|4374722816520|213.208.150.186' - 
> R=sip:pluteuspbx02 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Using full 
> extensioned alias as user - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting first 
> user-provided CLI '436641282435' to '06641282435' - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting first 
> network-provided CLI '436641282435' to '06641282435' - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
> caller_cli_userprov/caller_domain_userprov 
> '06641282435 at 213.208.150.186' for upn - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting From to 
> '<sip:06641282435 at 213.208.150.186>' - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting 
> P-Called-Party-ID '<sip:4374722816520 at 213.208.150.186>' - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Appending P-D-URI 
> 'sip:lb at 127.0.0.1;lr;socket=sip:10.4.220.8:5060' - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Forcing request 
> via B2BUA 'sip:127.0.0.1:5080' - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4014]: NOTICE: <script>: Request leaving 
> server, D-URI='sip:127.0.0.1:5080' - 
> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:06 spce proxy[4010]: NOTICE: <script>: NAT-Reply - S=100 
> - Connecting M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080) 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:07 spce proxy[4013]: NOTICE: <script>: NAT-Reply - S=180 
> - Ringing M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080) 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> Apr  7 16:03:09 spce proxy[4011]: NOTICE: <script>: NAT-Reply - S=200 
> - OK M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080) 
> ID=704776191_76226414 at 212.23.246.72_b2b-1
> 
> 
> mit freundlichen Grüßen
> best regards
> Martin Stix
> CEO
> pluteus communication solutions
> ms at pluteus.at
> www.pluteus.at
> Dampfsägestraße 17
> 3300 Amstetten
> Austria
> tel.: +43 7472 28165 20
> fax.: +43 7472 28165 22
> 
> -----Ursprüngliche Nachricht-----
> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
> Gesendet: Montag, 07. April 2014 13:15
> An: Martin Stix
> Cc: spce-user at lists.sipwise.com
> Betreff: Re: AW: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name 
> as contact for incoming calls
> 
> Hi Martin,
> so from PSTN to sub call, you should set the outbound_pai_user in subscriber preferences.
> 
> Please share your kamailio-proxy.log to see what happens.
> 
> Daniel
> 
> 
> 
> 
> 
> On 04/07/2014 12:17 PM, Martin Stix wrote:
>> Hi!
>>
>> It's just wanted for incoming calls from pstn(peering) to subscribers.
>>
>> regards
>>
>>
>> mit freundlichen Grüßen
>> best regards
>> Martin Stix
>> CEO
>> pluteus communication solutions
>> ms at pluteus.at
>> www.pluteus.at
>> Dampfsägestraße 17
>> 3300 Amstetten
>> Austria
>> tel.: +43 7472 28165 20
>> fax.: +43 7472 28165 22
>>
>> -----Ursprüngliche Nachricht-----
>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>> Gesendet: Montag, 07. April 2014 12:16
>> An: Martin Stix
>> Cc: spce-user at lists.sipwise.com
>> Betreff: Re: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name as 
>> contact for incoming calls
>>
>> Hi,
>> If you need to call another subscriber (A call B), then you should set the subscriber's preference outbound_pai_user on B.
>>
>> If you want to call outbound (sip trunk) you have to set that value in sip peering.
>>
>> Daniel
>>
>>
>>
>> On 04/07/2014 12:10 PM, Martin Stix wrote:
>>> Hi!
>>>
>>>  
>>>
>>> But here I have set UPRN if available or NPN. Isn't that just for 
>>> outgoing calls from subscriber to pstn?
>>>
>>>  
>>>
>>>  
>>>
>>>  
>>>
>>> mit freundlichen Grüßen
>>>
>>> best regards
>>>
>>> Martin Stix
>>>
>>> CEO
>>>
>>> pluteus communication solutions
>>>
>>> ms at pluteus.at
>>>
>>> www.pluteus.at
>>>
>>> Dampfsägestraße 17
>>>
>>> 3300 Amstetten
>>>
>>> Austria
>>>
>>> tel.: +43 7472 28165 20
>>>
>>> fax.: +43 7472 28165 22
>>>
>>>  
>>>
>>> -----Ursprüngliche Nachricht-----
>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>> Gesendet: Montag, 07. April 2014 12:10
>>> An: Martin Stix
>>> Cc: spce-user at lists.sipwise.com
>>> Betreff: Re: AW: AW: AW: AW: [Spce-user] Use subscriber name as 
>>> contact for incoming calls
>>>
>>>  
>>>
>>> Hi,
>>>
>>> Ah, no, you should set the Peering preferences not subscriber.
>>>
>>>  
>>>
>>> Daniel
>>>
>>>  
>>>
>>>  
>>>
>>> On 04/07/2014 12:08 PM, Daniel Grotti wrote:
>>>
>>>> Hi Martin,
>>>
>>>> can you provide the kamailio-proxy.log fro this callid ?
>>>
>>>>
>>>
>>>> Daniel
>>>
>>>>
>>>
>>>>
>>>
>>>>
>>>
>>>> On 04/07/2014 12:00 PM, Martin Stix wrote:
>>>
>>>>> Hi Daniel!
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> I've set the subscriber outbound pai user to authentication user
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> In Wireshark on my PBX I don't see PAI coming.
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> Tried to call from my mobile to my pbx.
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> Regards
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> mit freundlichen Grüßen
>>>
>>>>>
>>>
>>>>> best regards
>>>
>>>>>
>>>
>>>>> Martin Stix
>>>
>>>>>
>>>
>>>>> CEO
>>>
>>>>>
>>>
>>>>> pluteus communication solutions
>>>
>>>>>
>>>
>>>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>>
>>>>>
>>>
>>>>> www.pluteus.at <http://www.pluteus.at>
>>>
>>>>>
>>>
>>>>> Dampfsägestraße 17
>>>
>>>>>
>>>
>>>>> 3300 Amstetten
>>>
>>>>>
>>>
>>>>> Austria
>>>
>>>>>
>>>
>>>>> tel.: +43 7472 28165 20
>>>
>>>>>
>>>
>>>>> fax.: +43 7472 28165 22
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> -----Ursprüngliche Nachricht-----
>>>
>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>
>>>>> Gesendet: Montag, 07. April 2014 11:42
>>>
>>>>> An: Martin Stix
>>>
>>>>> Cc: spce-user at lists.sipwise.com
>>>>> <mailto:spce-user at lists.sipwise.com>
>>>
>>>>> Betreff: Re: AW: AW: AW: [Spce-user] Use subscriber name as 
>>>>> contact
>>>
>>>>> for incoming calls
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> Hi Martin,
>>>
>>>>>
>>>
>>>>> we currently do not set RPID header for outbound calls, we can 
>>>>> just
>>>
>>>>> read an RPID header for incoming calls setting inbound_upn or
>>> inbound_npn.
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> What you can use is the PAI, you can set the "outbound_pai_user"
>>>
>>>>> value in SIP Peering/Subscriber Preferences.
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> Daniel
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>>
>>>
>>>>> On 04/07/2014 11:21 AM, Martin Stix wrote:
>>>
>>>>>
>>>
>>>>>> Hi!
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> Could I use Remote Party ID for that, and if yes, how?
>>>
>>>>>
>>>
>>>>>> I don't mind the place where subscriber ID is being sent, except
>>>
>>>>>> from
>>>
>>>>> user part.
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> Thanks
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> mit freundlichen Grüßen
>>>
>>>>>
>>>
>>>>>> best regards
>>>
>>>>>
>>>
>>>>>> Martin Stix
>>>
>>>>>
>>>
>>>>>> CEO
>>>
>>>>>
>>>
>>>>>> pluteus communication solutions
>>>
>>>>>
>>>
>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>
>>>>>
>>>
>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>
>>>>>
>>>
>>>>>> Dampfsägestraße 17
>>>
>>>>>
>>>
>>>>>> 3300 Amstetten
>>>
>>>>>
>>>
>>>>>> Austria
>>>
>>>>>
>>>
>>>>>> tel.: +43 7472 28165 20
>>>
>>>>>
>>>
>>>>>> fax.: +43 7472 28165 22
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> -----Ursprüngliche Nachricht-----
>>>
>>>>>
>>>
>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>
>>>>>
>>>
>>>>>> Gesendet: Dienstag, 01. April 2014 12:08
>>>
>>>>>
>>>
>>>>>> An: Martin Stix
>>>
>>>>>
>>>
>>>>>> Cc: spce-user at lists.sipwise.com
>>>>>> <mailto:spce-user at lists.sipwise.com>
>>> <mailto:spce-user at lists.sipwise.com>
>>>
>>>>>
>>>
>>>>>> Betreff: Re: AW: AW: [Spce-user] Use subscriber name as contact 
>>>>>> for
>>>
>>>>>
>>>
>>>>>> incoming calls
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> Hi Martin,
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> this is something you can't achieve.
>>>
>>>>>
>>>
>>>>>> It's not the contact the header to use as source identifier, but
>>>
>>>>>> From
>>>
>>>>> or P-Asserted-Identity.
>>>
>>>>>
>>>
>>>>>> Contact header can't be changed.
>>>
>>>>>
>>>
>>>>>> Contact header is used as RURI in ACK and BYE, so if you change 
>>>>>> that
>>>
>>>>> that messeges will be sent to the wrong URI. They must be sent 
>>>>> back
>>>
>>>>> to NGCP LB.
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> Daniel
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>>
>>>
>>>>>
>>>
>>>>>> On 04/01/2014 12:02 PM, Martin Stix wrote:
>>>
>>>>>
>>>
>>>>>>> Hi!
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>> Sorry, other way round, I have a 3CX PBX registered as 
>>>>>>> subscriber
>>>
>>>>>>> on
>>>
>>>>> sipwise.
>>>
>>>>>
>>>
>>>>>>> When a call is made from PSTN to Sipwise to 3CX PBX it would be
>>>
>>>>>>> great
>>>
>>>>> to have the contact of the subscriber in contact field, and not ngcp-lb.
>>>
>>>>>
>>>
>>>>>>> So it makes live easier for us writing templates for 3CX and 
>>>>>>> roll
>>>
>>>>>>> it
>>>
>>>>> out to customers, because 3CX accepts the call in that case 
>>>>> without
>>>
>>>>> having the customer doing some source identifiers and stuff in the 3CX.
>>>
>>>>> It is mainly because one customer on one subscriber can have more
>>>
>>>>> than 1 number. So we use the contact as source identifier.
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>> regards
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>> mit freundlichen Grüßen
>>>
>>>>>
>>>
>>>>>>> best regards
>>>
>>>>>
>>>
>>>>>>> Martin Stix
>>>
>>>>>
>>>
>>>>>>> CEO
>>>
>>>>>
>>>
>>>>>>> pluteus communication solutions
>>>
>>>>>
>>>
>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>
>>>>>
>>>
>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>
>>>>>
>>>
>>>>>>> Dampfsägestraße 17
>>>
>>>>>
>>>
>>>>>>> 3300 Amstetten
>>>
>>>>>
>>>
>>>>>>> Austria
>>>
>>>>>
>>>
>>>>>>> tel.: +43 7472 28165 20
>>>
>>>>>
>>>
>>>>>>> fax.: +43 7472 28165 22
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>> -----Ursprüngliche Nachricht-----
>>>
>>>>>
>>>
>>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>
>>>>>
>>>
>>>>>>> Gesendet: Dienstag, 01. April 2014 11:57
>>>
>>>>>
>>>
>>>>>>> An: spce-user at lists.sipwise.com
>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>
>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>
>>>>>
>>>
>>>>>>> Cc: Martin Stix
>>>
>>>>>
>>>
>>>>>>> Betreff: Re: AW: [Spce-user] Use subscriber name as contact for
>>>
>>>>>
>>>
>>>>>>> incoming calls
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>> Hi Martin,
>>>
>>>>>
>>>
>>>>>>> if you want to authenticate incoming calls from a sip trunk
>>>
>>>>> (something we don't do) you have to register your siptrunk as
>>>
>>>>> subscriber on NGCP.
>>>
>>>>>
>>>
>>>>>>> We don't authenticate incoming calls from Peering servers.
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>> Daniel
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>>
>>>
>>>>>
>>>
>>>>>>> On 03/31/2014 05:54 PM, Martin Stix wrote:
>>>
>>>>>
>>>
>>>>>>>> Hi Daniel!
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> It just would be nice to authenticate incoming calls via this
>>>
>>>>> contact, in case of siptrunks with more than one main number, 
>>>>> instead
>>>
>>>>> of using IP or domain on pbx's.
>>>
>>>>>
>>>
>>>>>>>> Would there be a way?
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> Regards
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> mit freundlichen Grüßen
>>>
>>>>>
>>>
>>>>>>>> best regards
>>>
>>>>>
>>>
>>>>>>>> Martin Stix
>>>
>>>>>
>>>
>>>>>>>> CEO
>>>
>>>>>
>>>
>>>>>>>> pluteus communication solutions
>>>
>>>>>
>>>
>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>
>>>>>
>>>
>>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>
>>>>>
>>>
>>>>>>>> Dampfsägestraße 17
>>>
>>>>>
>>>
>>>>>>>> 3300 Amstetten
>>>
>>>>>
>>>
>>>>>>>> Austria
>>>
>>>>>
>>>
>>>>>>>> tel.: +43 7472 28165 20
>>>
>>>>>
>>>
>>>>>>>> fax.: +43 7472 28165 22
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> -----Ursprüngliche Nachricht-----
>>>
>>>>>
>>>
>>>>>>>> Von: spce-user-bounces at lists.sipwise.com
>>> <mailto:spce-user-bounces at lists.sipwise.com>
>>>
>>>>> <mailto:spce-user-bounces at lists.sipwise.com>
>>>
>>>>>
>>>
>>>>>>>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von 
>>>>>>>> Daniel
>>>
>>>>>
>>>
>>>>>>>> Grotti
>>>
>>>>>
>>>
>>>>>>>> Gesendet: Freitag, 07. Februar 2014 13:21
>>>
>>>>>
>>>
>>>>>>>> An: spce-user at lists.sipwise.com 
>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>
>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>
>>>>>
>>>
>>>>>>>> Betreff: Re: [Spce-user] Use subscriber name as contact for
>>>
>>>>>>>> incoming
>>>
>>>>>
>>>
>>>>>>>> calls
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> Hi,
>>>
>>>>>
>>>
>>>>>>>> you shouldn't touch that contact, there is no need to change 
>>>>>>>> the
>>>
>>>>> username, cause that's the username/contact of LB.
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> Daniel
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> On 02/07/2014 10:19 AM, Martin Stix wrote:
>>>
>>>>>
>>>
>>>>>>>>> Hi!
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> How can I change incoming contact for calls going to 
>>>>>>>>> subscribers
>>>
>>>>>>>>> to
>>>
>>>>>
>>>
>>>>>>>>> use the subscriber name instead of ngcp-lb?
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> Thanks
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> mit freundlichen Grüßen
>>>
>>>>>
>>>
>>>>>>>>> best regards
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> *Martin Stix*
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> CEO
>>>
>>>>>
>>>
>>>>>>>>> pluteus communication solutions
>>>
>>>>>
>>>
>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>> <mailto:ms at pluteus.at>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> www.pluteus.at <http://www.pluteus.at> <http://www.pluteus.at>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> Dampfsägestraße 17
>>>
>>>>>
>>>
>>>>>>>>> 3300 Amstetten
>>>
>>>>>
>>>
>>>>>>>>> Austria
>>>
>>>>>
>>>
>>>>>>>>> tel.: +43 7472 28165 20
>>>
>>>>>
>>>
>>>>>>>>> fax.: +43 7472 28165 22
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>> _______________________________________________
>>>
>>>>>
>>>
>>>>>>>>> Spce-user mailing list
>>>
>>>>>
>>>
>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>> <mailto:Spce-user at lists.sipwise.com>
>>>
>>>>>
>>>
>>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>
>>>>>
>>>
>>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>
>>>>>>>> _______________________________________________
>>>
>>>>>
>>>
>>>>>>>> Spce-user mailing list
>>>
>>>>>
>>>
>>>>>>>> Spce-user at lists.sipwise.com 
>>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>> <mailto:Spce-user at lists.sipwise.com>
>>>
>>>>>
>>>
>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>
>>>>>
>>>
>>>>>>>>
>>>
>>>>>
>>>