[Spce-user] Use subscriber name as contact for incoming calls
Martin Stix
ms at pluteus.at
Mon Apr 7 11:17:50 EDT 2014
OK, thanks very much for detailed Info!
Indeed 4374722816520 is an alias(DID number) for main number 43747228165.
I'll check the patching.
Thanks
mit freundlichen Grüßen
best regards
Martin Stix
CEO
pluteus communication solutions
ms at pluteus.at
www.pluteus.at
Dampfsägestraße 17
3300 Amstetten
Austria
tel.: +43 7472 28165 20
fax.: +43 7472 28165 22
-----Ursprüngliche Nachricht-----
Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
Gesendet: Montag, 07. April 2014 17:17
An: Martin Stix
Cc: spce-user at lists.sipwise.com
Betreff: Re: AW: AW: AW: AW: AW: AW: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name as contact for incoming calls
Hi Martin,
problem is that you are calling an extension of an alias:
4374722816520 is the extension of your alias 43747228165.
So the RURI, instead to have the Contact value "pluteuspbx02", it will be replace by the extensioned alias 4374722816520.
What you can do is to create another alias with the number: 4374722816520 So it will not be an extensioned alias anymore and then R-URI should be set to Contact "pluteuspbx02".
If this is something you can't do, the only way to have Contact "pluteuspbx02" somewhere is to set your own "X-Contact" header field and set there the "pluteuspbx02".
You have to patch kamailio.cfg just before the "sing full extensioned alias as user " part, so you can set X-Contact=$rU.
Also you have to patch SEMS in
/etc/ngcp-config/templates/etc/sems/etc/ngcp.sbcprofile.conf.customtt.tt2,
adding in your whitelist the X-Contact header field:
header_filter=whitelist
header_list=P-R-Uri,P-D-Uri,P-Preferred-Identity,P-Asserted-Identity,Diversion,Privacy,Allow,Supported,Require,RAck,RSeq,Rseq,User-Agent,History-Info,Call-Info,Event,Expires,Subscription-State,Accept,
X-Contact
Is it clear enough ?
Daniel
On 04/07/2014 04:49 PM, Martin Stix wrote:
> Hi!
>
>
> Not in all fields, just in one, no matter which one.
>
> I want to identify incoming calls on 3CX PBX with this parameter for simplifying client trunk rollouts.
>
> So To and PAI can be like now(4374722816520), and i.E.: RPID is set to pluteuspbx02.
>
> Thanks
>
>
>
> mit freundlichen Grüßen
> best regards
> Martin Stix
> CEO
> pluteus communication solutions
> ms at pluteus.at
> www.pluteus.at
> Dampfsägestraße 17
> 3300 Amstetten
> Austria
> tel.: +43 7472 28165 20
> fax.: +43 7472 28165 22
>
> -----Ursprüngliche Nachricht-----
> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
> Gesendet: Montag, 07. April 2014 16:47
> An: Martin Stix
> Cc: spce-user at lists.sipwise.com
> Betreff: Re: AW: AW: AW: AW: AW: AW: AW: AW: AW: AW: [Spce-user] Use
> subscriber name as contact for incoming calls
>
> Sorry Martin,
> can you explain your problem, why do you need to have all the field set to callee user?
> It sounds really weird.
>
> What do you have to do on the client side ? What is the problem on client side ?
>
> Thanks,
>
> Daniel
>
>
> On 04/07/2014 04:40 PM, Martin Stix wrote:
>> OK,
>>
>> Then can I get any field filled with callee user in this scenario?
>> I'll need the pluteupbx02 (subscriber user, assigned to 4374722816520), no matter in which sip field.
>>
>> Thanks
>>
>>
>> mit freundlichen Grüßen
>> best regards
>> Martin Stix
>> CEO
>> pluteus communication solutions
>> ms at pluteus.at
>> www.pluteus.at
>> Dampfsägestraße 17
>> 3300 Amstetten
>> Austria
>> tel.: +43 7472 28165 20
>> fax.: +43 7472 28165 22
>>
>> -----Ursprüngliche Nachricht-----
>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>> Gesendet: Montag, 07. April 2014 16:40
>> An: Martin Stix
>> Cc: spce-user at lists.sipwise.com
>> Betreff: Re: AW: AW: AW: AW: AW: AW: AW: AW: AW: [Spce-user] Use
>> subscriber name as contact for incoming calls
>>
>> Martin,
>> you can fetch callee user number from:
>>
>> TO: sip:4374722816520 at sip.siproute.at
>>
>> R-URI:
>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136df
>>
>> P-Called-Party-ID: sip:4374722816520 at 213.208.150.186 (you need to
>> enable this header, otherwise it's stripped away by SEMS)
>>
>> These are the headers where you fetch the callee information.
>> You can't set callee user into PAI. PAI carries caller information.
>>
>>
>>
>> Daniel
>>
>>
>>
>>
>>
>> On 04/07/2014 04:27 PM, Martin Stix wrote:
>>> OK,
>>> and how could I achieve this(set callee user), maybe directly in config?
>>>
>>> Thanks
>>>
>>>
>>> mit freundlichen Grüßen
>>> best regards
>>> Martin Stix
>>> CEO
>>> pluteus communication solutions
>>> ms at pluteus.at
>>> www.pluteus.at
>>> Dampfsägestraße 17
>>> 3300 Amstetten
>>> Austria
>>> tel.: +43 7472 28165 20
>>> fax.: +43 7472 28165 22
>>>
>>> -----Ursprüngliche Nachricht-----
>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>> Gesendet: Montag, 07. April 2014 16:28
>>> An: Martin Stix
>>> Cc: spce-user at lists.sipwise.com
>>> Betreff: Re: AW: AW: AW: AW: AW: AW: AW: AW: [Spce-user] Use
>>> subscriber name as contact for incoming calls
>>>
>>> Hi Martin,
>>> problem is that Auth-user is empty because this is a call from PSTN, so PAI is not set.
>>>
>>> outbound_pai_user=Authentication User
>>>
>>> means caller Authentication User.
>>>
>>> Daniel
>>>
>>>
>>>
>>>
>>> On 04/07/2014 04:16 PM, Martin Stix wrote:
>>>> No
>>>>
>>>>
>>>> mit freundlichen Grüßen
>>>> best regards
>>>> Martin Stix
>>>> CEO
>>>> pluteus communication solutions
>>>> ms at pluteus.at
>>>> www.pluteus.at
>>>> Dampfsägestraße 17
>>>> 3300 Amstetten
>>>> Austria
>>>> tel.: +43 7472 28165 20
>>>> fax.: +43 7472 28165 22
>>>>
>>>> -----Ursprüngliche Nachricht-----
>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>> Gesendet: Montag, 07. April 2014 16:18
>>>> An: Martin Stix
>>>> Cc: spce-user at lists.sipwise.com
>>>> Betreff: Re: AW: AW: AW: AW: AW: AW: AW: [Spce-user] Use subscriber
>>>> name as contact for incoming calls
>>>>
>>>> Hi Martin,
>>>> do you have CLIR set to user 4374722816520 ?
>>>>
>>>> Daniel
>>>>
>>>>
>>>> On 04/07/2014 04:05 PM, Martin Stix wrote:
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: New request -
>>>>> M=INVITE R=sip:4374722816520 at 213.208.150.186
>>>>> F=sip:+436641282435 at sip.siproute.at
>>>>> T=sip:4374722816520 at sip.siproute.at IP=5.83.133.52:5060
>>>>> (127.0.0.1:5060) ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Call from PSTN
>>>>> -
>>>>> R=sip:4374722816520 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: User-Provided
>>>>> CLI '+436641282435' taken from From-User -
>>>>> R=sip:4374722816520 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>:
>>>>> Network-Provided CLI '+436641282435' taken from From-User -
>>>>> R=sip:4374722816520 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting
>>>>> user-provided CLI '+436641282435' to '436641282435' -
>>>>> R=sip:4374722816520 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting
>>>>> network-provided CLI '+436641282435' to '436641282435' -
>>>>> R=sip:4374722816520 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting
>>>>> '436641282435 at sip.siproute.at' as initiating user-provided CLI -
>>>>> R=sip:4374722816520 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting
>>>>> '436641282435 at sip.siproute.at' as initiating network-provided CLI
>>>>> -
>>>>> R=sip:4374722816520 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Callee was
>>>>> aliased with extension '43747228165' -
>>>>> R=sip:pluteuspbx02 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Callee is
>>>>> local, uuid='913b4fd7-0d9b-4e85-bd9d-5256c39967b7' -
>>>>> R=sip:pluteuspbx02 at 213.208.150.186
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting acc
>>>>> source-leg for uuid '0':
>>>>> '0|+436641282435|5.83.133.52|436641282435|||0|||0|call|5.83.133.52
>>>>> |
>>>>> 1
>>>>> 3
>>>>> 9
>>>>> 6879386.817402' -
>>>>> R=sip:pluteuspbx02 at 213.208.137.151:5060;rinstance=d6d588c510e136df
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting acc
>>>>> destination-leg for uuid '913b4fd7-0d9b-4e85-bd9d-5256c39967b7':
>>>>> '0|||5|4374722816520|913b4fd7-0d9b-4e85-bd9d-5256c39967b7|pluteusp
>>>>> b
>>>>> x
>>>>> 0
>>>>> 2
>>>>> |213.208.150.186|4374722816520|213.208.150.186' -
>>>>> R=sip:pluteuspbx02 at 213.208.137.151:5060;rinstance=d6d588c510e136df
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Using full
>>>>> extensioned alias as user -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting
>>>>> first user-provided CLI '436641282435' to '06641282435' -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Rewriting
>>>>> first network-provided CLI '436641282435' to '06641282435' -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting
>>>>> caller_cli_userprov/caller_domain_userprov
>>>>> '06641282435 at 213.208.150.186' for upn -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting From
>>>>> to '<sip:06641282435 at 213.208.150.186>' -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Setting
>>>>> P-Called-Party-ID '<sip:4374722816520 at 213.208.150.186>' -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Appending
>>>>> P-D-URI 'sip:lb at 127.0.0.1;lr;socket=sip:10.4.220.8:5060' -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Forcing
>>>>> request via B2BUA 'sip:127.0.0.1:5080' -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4014]: NOTICE: <script>: Request
>>>>> leaving server, D-URI='sip:127.0.0.1:5080' -
>>>>> R=sip:4374722816520 at 213.208.137.151:5060;rinstance=d6d588c510e136d
>>>>> f
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:06 spce proxy[4010]: NOTICE: <script>: NAT-Reply -
>>>>> S=100
>>>>> - Connecting M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080)
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:07 spce proxy[4013]: NOTICE: <script>: NAT-Reply -
>>>>> S=180
>>>>> - Ringing M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080)
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>> Apr 7 16:03:09 spce proxy[4011]: NOTICE: <script>: NAT-Reply -
>>>>> S=200
>>>>> - OK M=INVITE IP=5.83.133.52:5060 (127.0.0.1:5080)
>>>>> ID=704776191_76226414 at 212.23.246.72_b2b-1
>>>>>
>>>>>
>>>>> mit freundlichen Grüßen
>>>>> best regards
>>>>> Martin Stix
>>>>> CEO
>>>>> pluteus communication solutions
>>>>> ms at pluteus.at
>>>>> www.pluteus.at
>>>>> Dampfsägestraße 17
>>>>> 3300 Amstetten
>>>>> Austria
>>>>> tel.: +43 7472 28165 20
>>>>> fax.: +43 7472 28165 22
>>>>>
>>>>> -----Ursprüngliche Nachricht-----
>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>> Gesendet: Montag, 07. April 2014 13:15
>>>>> An: Martin Stix
>>>>> Cc: spce-user at lists.sipwise.com
>>>>> Betreff: Re: AW: AW: AW: AW: AW: AW: [Spce-user] Use subscriber
>>>>> name as contact for incoming calls
>>>>>
>>>>> Hi Martin,
>>>>> so from PSTN to sub call, you should set the outbound_pai_user in subscriber preferences.
>>>>>
>>>>> Please share your kamailio-proxy.log to see what happens.
>>>>>
>>>>> Daniel
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 04/07/2014 12:17 PM, Martin Stix wrote:
>>>>>> Hi!
>>>>>>
>>>>>> It's just wanted for incoming calls from pstn(peering) to subscribers.
>>>>>>
>>>>>> regards
>>>>>>
>>>>>>
>>>>>> mit freundlichen Grüßen
>>>>>> best regards
>>>>>> Martin Stix
>>>>>> CEO
>>>>>> pluteus communication solutions
>>>>>> ms at pluteus.at
>>>>>> www.pluteus.at
>>>>>> Dampfsägestraße 17
>>>>>> 3300 Amstetten
>>>>>> Austria
>>>>>> tel.: +43 7472 28165 20
>>>>>> fax.: +43 7472 28165 22
>>>>>>
>>>>>> -----Ursprüngliche Nachricht-----
>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>>> Gesendet: Montag, 07. April 2014 12:16
>>>>>> An: Martin Stix
>>>>>> Cc: spce-user at lists.sipwise.com
>>>>>> Betreff: Re: AW: AW: AW: AW: AW: [Spce-user] Use subscriber name
>>>>>> as contact for incoming calls
>>>>>>
>>>>>> Hi,
>>>>>> If you need to call another subscriber (A call B), then you should set the subscriber's preference outbound_pai_user on B.
>>>>>>
>>>>>> If you want to call outbound (sip trunk) you have to set that value in sip peering.
>>>>>>
>>>>>> Daniel
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 04/07/2014 12:10 PM, Martin Stix wrote:
>>>>>>> Hi!
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> But here I have set UPRN if available or NPN. Isn't that just
>>>>>>> for outgoing calls from subscriber to pstn?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> mit freundlichen Grüßen
>>>>>>>
>>>>>>> best regards
>>>>>>>
>>>>>>> Martin Stix
>>>>>>>
>>>>>>> CEO
>>>>>>>
>>>>>>> pluteus communication solutions
>>>>>>>
>>>>>>> ms at pluteus.at
>>>>>>>
>>>>>>> www.pluteus.at
>>>>>>>
>>>>>>> Dampfsägestraße 17
>>>>>>>
>>>>>>> 3300 Amstetten
>>>>>>>
>>>>>>> Austria
>>>>>>>
>>>>>>> tel.: +43 7472 28165 20
>>>>>>>
>>>>>>> fax.: +43 7472 28165 22
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> -----Ursprüngliche Nachricht-----
>>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>>>> Gesendet: Montag, 07. April 2014 12:10
>>>>>>> An: Martin Stix
>>>>>>> Cc: spce-user at lists.sipwise.com
>>>>>>> Betreff: Re: AW: AW: AW: AW: [Spce-user] Use subscriber name as
>>>>>>> contact for incoming calls
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Ah, no, you should set the Peering preferences not subscriber.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Daniel
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 04/07/2014 12:08 PM, Daniel Grotti wrote:
>>>>>>>
>>>>>>>> Hi Martin,
>>>>>>>
>>>>>>>> can you provide the kamailio-proxy.log fro this callid ?
>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>> Daniel
>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>> On 04/07/2014 12:00 PM, Martin Stix wrote:
>>>>>>>
>>>>>>>>> Hi Daniel!
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> I've set the subscriber outbound pai user to authentication
>>>>>>>>> user
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> In Wireshark on my PBX I don't see PAI coming.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> Tried to call from my mobile to my pbx.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> Regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> mit freundlichen Grüßen
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> best regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> Martin Stix
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> CEO
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> pluteus communication solutions
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> www.pluteus.at <http://www.pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> Dampfsägestraße 17
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> 3300 Amstetten
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> Austria
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> tel.: +43 7472 28165 20
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> fax.: +43 7472 28165 22
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> -----Ursprüngliche Nachricht-----
>>>>>>>
>>>>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>>>>
>>>>>>>>> Gesendet: Montag, 07. April 2014 11:42
>>>>>>>
>>>>>>>>> An: Martin Stix
>>>>>>>
>>>>>>>>> Cc: spce-user at lists.sipwise.com
>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>> Betreff: Re: AW: AW: AW: [Spce-user] Use subscriber name as
>>>>>>>>> contact
>>>>>>>
>>>>>>>>> for incoming calls
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> Hi Martin,
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> we currently do not set RPID header for outbound calls, we can
>>>>>>>>> just
>>>>>>>
>>>>>>>>> read an RPID header for incoming calls setting inbound_upn or
>>>>>>> inbound_npn.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> What you can use is the PAI, you can set the "outbound_pai_user"
>>>>>>>
>>>>>>>>> value in SIP Peering/Subscriber Preferences.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> Daniel
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>> On 04/07/2014 11:21 AM, Martin Stix wrote:
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Hi!
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Could I use Remote Party ID for that, and if yes, how?
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> I don't mind the place where subscriber ID is being sent,
>>>>>>>>>> except
>>>>>>>
>>>>>>>>>> from
>>>>>>>
>>>>>>>>> user part.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Thanks
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> mit freundlichen Grüßen
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> best regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Martin Stix
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> CEO
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> pluteus communication solutions
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> www.pluteus.at <http://www.pluteus.at>
>>>>>>>>>> <http://www.pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Dampfsägestraße 17
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> 3300 Amstetten
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Austria
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> tel.: +43 7472 28165 20
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> fax.: +43 7472 28165 22
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> -----Ursprüngliche Nachricht-----
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Gesendet: Dienstag, 01. April 2014 12:08
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> An: Martin Stix
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Cc: spce-user at lists.sipwise.com
>>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Betreff: Re: AW: AW: [Spce-user] Use subscriber name as
>>>>>>>>>> contact for
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> incoming calls
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Hi Martin,
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> this is something you can't achieve.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> It's not the contact the header to use as source identifier,
>>>>>>>>>> but
>>>>>>>
>>>>>>>>>> From
>>>>>>>
>>>>>>>>> or P-Asserted-Identity.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Contact header can't be changed.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Contact header is used as RURI in ACK and BYE, so if you
>>>>>>>>>> change that
>>>>>>>
>>>>>>>>> that messeges will be sent to the wrong URI. They must be sent
>>>>>>>>> back
>>>>>>>
>>>>>>>>> to NGCP LB.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> Daniel
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>> On 04/01/2014 12:02 PM, Martin Stix wrote:
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Hi!
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Sorry, other way round, I have a 3CX PBX registered as
>>>>>>>>>>> subscriber
>>>>>>>
>>>>>>>>>>> on
>>>>>>>
>>>>>>>>> sipwise.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> When a call is made from PSTN to Sipwise to 3CX PBX it would
>>>>>>>>>>> be
>>>>>>>
>>>>>>>>>>> great
>>>>>>>
>>>>>>>>> to have the contact of the subscriber in contact field, and not ngcp-lb.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> So it makes live easier for us writing templates for 3CX and
>>>>>>>>>>> roll
>>>>>>>
>>>>>>>>>>> it
>>>>>>>
>>>>>>>>> out to customers, because 3CX accepts the call in that case
>>>>>>>>> without
>>>>>>>
>>>>>>>>> having the customer doing some source identifiers and stuff in the 3CX.
>>>>>>>
>>>>>>>>> It is mainly because one customer on one subscriber can have
>>>>>>>>> more
>>>>>>>
>>>>>>>>> than 1 number. So we use the contact as source identifier.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> mit freundlichen Grüßen
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> best regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Martin Stix
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> CEO
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> pluteus communication solutions
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> www.pluteus.at <http://www.pluteus.at>
>>>>>>>>>>> <http://www.pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Dampfsägestraße 17
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> 3300 Amstetten
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Austria
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> tel.: +43 7472 28165 20
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> fax.: +43 7472 28165 22
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> -----Ursprüngliche Nachricht-----
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Gesendet: Dienstag, 01. April 2014 11:57
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> An: spce-user at lists.sipwise.com
>>>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Cc: Martin Stix
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Betreff: Re: AW: [Spce-user] Use subscriber name as contact
>>>>>>>>>>> for
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> incoming calls
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Hi Martin,
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> if you want to authenticate incoming calls from a sip trunk
>>>>>>>
>>>>>>>>> (something we don't do) you have to register your siptrunk as
>>>>>>>
>>>>>>>>> subscriber on NGCP.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> We don't authenticate incoming calls from Peering servers.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> Daniel
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>> On 03/31/2014 05:54 PM, Martin Stix wrote:
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Hi Daniel!
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> It just would be nice to authenticate incoming calls via
>>>>>>>>>>>> this
>>>>>>>
>>>>>>>>> contact, in case of siptrunks with more than one main number,
>>>>>>>>> instead
>>>>>>>
>>>>>>>>> of using IP or domain on pbx's.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Would there be a way?
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> mit freundlichen Grüßen
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> best regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Martin Stix
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> CEO
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> pluteus communication solutions
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> www.pluteus.at <http://www.pluteus.at>
>>>>>>>>>>>> <http://www.pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Dampfsägestraße 17
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> 3300 Amstetten
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Austria
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> tel.: +43 7472 28165 20
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> fax.: +43 7472 28165 22
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> -----Ursprüngliche Nachricht-----
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Von: spce-user-bounces at lists.sipwise.com
>>>>>>> <mailto:spce-user-bounces at lists.sipwise.com>
>>>>>>>
>>>>>>>>> <mailto:spce-user-bounces at lists.sipwise.com>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von
>>>>>>>>>>>> Daniel
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Grotti
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Gesendet: Freitag, 07. Februar 2014 13:21
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> An: spce-user at lists.sipwise.com
>>>>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Betreff: Re: [Spce-user] Use subscriber name as contact for
>>>>>>>
>>>>>>>>>>>> incoming
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> calls
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> you shouldn't touch that contact, there is no need to
>>>>>>>>>>>> change the
>>>>>>>
>>>>>>>>> username, cause that's the username/contact of LB.
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Daniel
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> On 02/07/2014 10:19 AM, Martin Stix wrote:
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> Hi!
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> How can I change incoming contact for calls going to
>>>>>>>>>>>>> subscribers
>>>>>>>
>>>>>>>>>>>>> to
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> use the subscriber name instead of ngcp-lb?
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> Thanks
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> mit freundlichen Grüßen
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> best regards
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> *Martin Stix*
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> CEO
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> pluteus communication solutions
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>>>>>>>>>>>> <mailto:ms at pluteus.at>
>>>>>>> <mailto:ms at pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> www.pluteus.at <http://www.pluteus.at>
>>>>>>>>>>>>> <http://www.pluteus.at>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> Dampfsägestraße 17
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> 3300 Amstetten
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> Austria
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> tel.: +43 7472 28165 20
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> fax.: +43 7472 28165 22
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> Spce-user mailing list
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Spce-user mailing list
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>>>>>>
>>>>>>>
>>>>>>>>>
>>>>>>>
More information about the Spce-user
mailing list