[Spce-user] SIPWise performance settings for DELL R620

[Joel Smith | VOZELIA]

Thank you very much Jon.

I'm going to set those parameters and check the handbook :)

Best regards!
Joel.



----- Original Message -----
> From: "Jon Bonilla (Manwe)" <jbonilla at sipwise.com>
> To: spce-user at lists.sipwise.com
> Sent: Wednesday, February 26, 2014 9:23:52 AM
> Subject: Re: [Spce-user] SIPWise performance settings for DELL R620
> 
> El Tue, 25 Feb 2014 21:19:32 +0100 (CET)
> Joel Smith | VOZELIA <joel at vozelia.com> escribió:
> 
> > Hi everybody,
> > 
> > We are going to install sipwise on a dedicated DELL R620 with 2x
> > Intel
> > E5-2630 v2 XEON 2.6Ghz six-core CPU and 32GB RAM.
> > 
> > Does the ngcp installer set performance settings according to the
> > hardware it
> > detects or should this be done manually once the installation is
> > complete?
> > 
> > Is there any doc / guidelines I can follow to set the correct
> > parameters for
> > the mentioned hardware?
> > 
> 
> 
> Hi Joel
> 
> You will have 24(!) processor threads running in that system. There's
> almost
> nothing you should tweak as it will be able to handle thousands of
> calls. I
> guess your bottleneck might be the hdd or the network card.
> 
> Depending on the version you're running what you should check is the
> following:
> 
> - Bufferpool size for mysql. It's in config.yml and you can set it
> safely to
>   8GB or even more at your will. In PRO systems we usually set it up
>   to 50%
>   of the available RAM.
> 
> - SHM mem size for kamailio proxy and lb. 1GB should be enough to
> handle more
>   than 2K concurrent calls.
> 
> 
> In the 3.x handbook you have a chapter dedicated to explain some
> configuration
> options that can impact in the system performance
> 
> http://www.sipwise.com/doc/3.1/spce/ar01s13.html#_system_requirements_and_performance
> 
> 
> cheers,
> 
> Jon
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
>