[Spce-user] Missing Max-Forwards Header

Wed Jan 8 15:56:56 EST 2014

Ok, I understand.  In any case you will want to change the Max Forwards
to 70 which will have far better support for US based SIP providers.

I would still recommend changing the value to 70 especially if your
server is connecting to SIP Trunks that are US based, even on version
3.0+

I am sorry it was not a direct answer.

Kevin

From: Schaefer, Larry [mailto:Larry.Schaefer at pgi.com] 
Sent: Wednesday, January 08, 2014 3:35 PM
To: Kevin Masse; spce-user at lists.sipwise.com
Subject: RE: [Spce-user] Missing Max-Forwards Header

Kevin,

Thanks for the quick response... That value is listed in the kamailio lb
section with a value of 10.  However, in my example, I was not using the
load balancer.  I was just testing directly with sending an Invite (from
a softphone client) directly to the SBC and watching what came out of
the SBC...  I also believe that I am on the 3.1 version.

kamailio:

  lb:

    debug: 'no'

    extra_sockets: ~

    max_forwards: 10

    nattest_exception_ips: ~

    pkg_mem: 16

    port: 5080

    security:

      dos_ban_enable: 'yes'

      dos_ban_time: 300

      dos_reqs_density_per_unit: 50

      dos_sampling_time_unit: 5

      dos_whitelisted_ips: ~

      failed_auth_attempts: 3

      failed_auth_ban_enable: 'yes'

      failed_auth_ban_time: 3600

    shm_mem: 466

    start: 'yes'

    tcp_children: 8

    tcp_max_connections: 2048

    tls:

      enable: 'yes'

      port: 5061

      sslcertfile: '/etc/kamailio/kamailio-selfsigned.pem'

      sslcertkeyfile: '/etc/kamailio/kamailio-selfsigned.key'

    udp_children: 8

Looking further in that file, I have found the settings for the sems sbc
component.  I did chance the bindport and turned off a couple options
which I did not need (like conferencing) but see nothing in that section
about max-forwards.

sems:

  bindport: 5060

  conference:

    enable: 'no'

    max_participants: 10

  highport: 50000

  lowport: 40001

  sbc:

    calltimer_enable: 'yes'

    calltimer_max: 21600

    outbound_timeout: 6000

    sdp_filter:

      codecs: PCMA,PCMU,telephone-event

      enable: 'no'

      mode: whitelist

    session_timer:

      enable: 'yes'

      max_timer: 7200

      min_timer: 90

      session_expires: 300

  vsc:

    block_override_code: 80

    cfb_code: 90

    cfna_code: 93

    cft_code: 92

    cfu_code: 72

    clir_code: 31

    enable: 'no'

    reminder_code: 55

    speedial_code: 50

    voicemail_number: 2000

  xmlrpcport: 8090

Thanks,
Larry

From: Kevin Masse [mailto:kmasse at questblue.com] 
Sent: Wednesday, January 08, 2014 1:20 PM
To: Schaefer, Larry; spce-user at lists.sipwise.com
Subject: RE: [Spce-user] Missing Max-Forwards Header

Good afternoon Larry, take a look in your /etc/ngcp-config/config.yml
file around line 60 +

You should have something like this:   max_forwards=70

kamailio:

  lb:

    b2buas:

      - sip\:127.0.0.1\:5080

    extra_sockets: ~

    max_forwards: 70

    pkg_mem: 16

    port: 5060

    proxies:

      - sip\:127.0.0.1\:5062

See if that will do away with the error.  I do see in your example below
in RED Max-Forwards: 70 but lets verify the config.yml

I should also mention my information is related to 2.8

Kevin

From: spce-user-bounces at lists.sipwise.com
[mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Schaefer,
Larry
Sent: Wednesday, January 08, 2014 2:22 PM
To: spce-user at lists.sipwise.com
Subject: [Spce-user] Missing Max-Forwards Header

Hello... I am just getting started using SEMS with SBC application.  I
am seeing an issue where after I hang up a call, the BYE being sent to
my SIP application server does not contain a Max-Forwards header.  This
causes my SIP stack throw the following error:  "Missing a required
header : Max-Forwards".

The BYE message going into the SBC has an Max-Forwards, but when it
leaves the SBC, it does not.  The logs below are from the sems.log file
that show the messages I am seeing.  The final message is the one that I
am having an issue with.

Original Invite to SBC:

Jan  8 19:08:13 sipwise sems[12819]: [#7fe230676700] [run,
udp_trsp.cpp:213] DEBUG: vv M [|] u recvd msg via UDP
vv#012--++--#012INVITE sip:17193860006 at 10.81.224.232 SIP/2.0#015#012Via:
SIP/2.0/UDP
10.2.62.78:44912;branch=z9hG4bK-d8754z-4058c4102839a274-1---d8754z-;rpor
t#015#012Max-Forwards: 70#015#012Contact:
<sip:3333 at 10.2.62.78:44912>#015#012To:
"100"<sip:17193860006 at 10.81.224.232>#015#012From:
"3333"<sip:3333 at 10.2.62.78>;tag=d6147351#015#012Call-ID:
MjNhZDViYTRmZTdiNWQwODc1NGU4MGU5YTQwOTllZTE.#015#012CSeq: 1
INVITE#015#012Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY,
MESSAGE, SUBSCRIBE, INFO#015#012Content-Type:
application/sdp#015#012User-Agent: eyeBeam release 1105z stamp
59031#015#012Content-Length: 180#015#012#015#012v=0#015#012o=- 9 2 IN
IP4 10.2.62.78#015#012s=CounterPath eyeBeam 1.5#015#012c=IN IP4
10.2.62.78#015#012t=0 0#015#012m=audio 55426 RTP/AVP 0
101#015#012a=fmtp:101 0-15#015#012a=rtpmap:101
telephone-event/8000#015#012a=sendrecv#015#012--++--

New Invite from SBC to my SIP Server:

Jan  8 19:08:13 sipwise sems[12819]: [#7fe231c8c700] [send,
transport.cpp:98] DEBUG: send  msg#012--++--#012INVITE
sip:17193860006 at 10.81.224.232 SIP/2.0#015#012Via: SIP/2.0/UDP
10.81.224.232;branch=z9hG4bKCSNunal9;rport#015#012From: "3333"
<sip:3333 at 10.2.62.78>;tag=3221B159-52CDA21D000EE81D-31D8D700#015#012To:
"100"<sip:17193860006 at 10.81.224.232>#015#012CSeq: 10
INVITE#015#012Call-ID:
MjNhZDViYTRmZTdiNWQwODc1NGU4MGU5YTQwOTllZTE._leg2#015#012Contact:
<sip:10.81.224.232:5060>#015#012Max-Forwards: 70#015#012Allow: INVITE,
ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE,
INFO#015#012User-Agent: eyeBeam release 1105z stamp
59031#015#012P-Source-IP: 10.2.62.78#015#012P-Source-Port:
44912#015#012Content-Type: application/sdp#015#012Content-Length:
166#015#012#015#012v=0#015#012o=- 9 2 IN IP4
10.2.62.78#015#012s=CounterPath eyeBeam 1.5#015#012c=IN IP4
10.81.224.232#015#012t=0 0#015#012m=audio 40002 RTP/AVP 0
101#015#012a=rtpmap:101
telephone-event/8000#015#012a=sendrecv#015#012--++--

Bye sent to SBC:

Jan  8 19:08:18 sipwise sems[12819]: [#7fe230676700] [run,
udp_trsp.cpp:213] DEBUG: vv M [|] u recvd msg via UDP
vv#012--++--#012BYE sip:17193860006 at 10.81.224.232:5060
SIP/2.0#015#012Via: SIP/2.0/UDP
10.2.62.78:44912;branch=z9hG4bK-d8754z-7b597f277435f31e-1---d8754z-;rpor
t#015#012Max-Forwards: 70#015#012Contact:
<sip:3333 at 10.2.62.78:44912>#015#012To:
"100"<sip:17193860006 at 10.81.224.232>;tag=7E3767AC-52CDA21D000EE063-30676
700#015#012From:
"3333"<sip:3333 at 10.2.62.78>;tag=d6147351#015#012Call-ID:
MjNhZDViYTRmZTdiNWQwODc1NGU4MGU5YTQwOTllZTE.#015#012CSeq: 2
BYE#015#012User-Agent: eyeBeam release 1105z stamp 59031#015#012Reason:
SIP;description="User Hung Up"#015#012Content-Length:
0#015#012#015#012--++--

Bye sent to my SIP server (no Max-Forwards header):

Jan  8 19:08:18 sipwise sems[12819]: [#7fe231c8c700] [send,
transport.cpp:98] DEBUG: send  msg#012--++--#012BYE
sip:17193860006 at 10.2.62.78 SIP/2.0#015#012Via: SIP/2.0/UDP
10.81.224.232;branch=z9hG4bKBQ3b.aXk;rport#015#012From: "3333"
<sip:3333 at 10.2.62.78>;tag=3221B159-52CDA21D000EE81D-31D8D700#015#012To:
"100"<sip:17193860006 at 10.81.224.232>;tag=367319031#015#012CSeq: 11
BYE#015#012Call-ID:
MjNhZDViYTRmZTdiNWQwODc1NGU4MGU5YTQwOTllZTE._leg2#015#012Content-Length:
0#015#012#015#012--++--

Is there anything I am doing wrong?  I have been searching, but not
found any settings that seem to deal with Max-Forwards.

Thanks,

Larry Schaefer

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20140108/cd302efc/attachment.html>