[Spce-user] Contact header Replace - MOdify

[Daniel Grotti]

Hi,
Which contact you would like to change ?
If you change the LB Contact header (sip:ngcp-lb at IP) you will break all
the call flow.
Contact header is not used in SIP to fetch information about the caller,
Contact header doesn't contain information about CallerID and it is not
used to decode Caller ID.
>From Header or P-Asserted-Identity are used for this purpose.

Sorry, but if your endpoint is trying to use Contact to fetch caller id
information looks like a broken endpoint, cause contact doesn't carry
such information.
It is used as R-URI in ACK and BYE messages.

I've never seen an operator SIP device fetching caller id info from
Contact header.


Daniel





On 07/13/2014 11:04 AM, Leopoldo Iglesia wrote:
> Hi!
>
> I´m trying to modify Contact header info in SEMS config, but no
> working. I´m with 2.8 sipwise.
> I need to change, cause the endpoint requires from user ID to decode
> Caller ID on the contact header.
>
> Sip issues... don´t know why is done this way, but I need to change
> it. Other operators are doing so, so it seems SBC can do it.
>
> Any help on this?
>
> Thanks
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user