[Spce-user] Contact header Replace - MOdify

[Lorenzo Mangani]

Leopoldo,

SEMS supports modifying the Contact header as shown in their example
sbcprofile.conf (which will likely be the wrong approach as well as the
easiest way to demolish your routing when not done properly) but since the
underlying SIP issue is not clear to you either apparently so far, I would
strongly suggest investigating other options first - having the Caller ID
in the contact header surely outlines an issue with your setup/endpoints
and not the CE. This being said:

#Contact=<sip:$Ri>

Link:
https://github.com/sipwise/sems/blob/master/apps/sbc/etc/transparent.sbcprofile.conf


Best,

Lorenzo Mangani

HOMER / PCAPTURE DEV TEAM
Desk: +31 20 8080468 / +1 202-632-7227
Mobile: +31 6 4603-2730

QXIP BV - Capture Engineering
Amsterdam, The Netherlands
get at pcapture.com





On Sun, Jul 13, 2014 at 11:04 AM, Leopoldo Iglesia <liglesia at por-aire.es>
wrote:

> Hi!
>
> I´m trying to modify Contact header info in SEMS config, but no working.
> I´m with 2.8 sipwise.
> I need to change, cause the endpoint requires from user ID to decode
> Caller ID on the contact header.
>
> Sip issues... don´t know why is done this way, but I need to change it.
> Other operators are doing so, so it seems SBC can do it.
>
> Any help on this?
>
> Thanks
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20140713/f7d7d369/attachment-0001.html>