[Spce-user] Contact header Replace - MOdify

Leopoldo Iglesia liglesia at por-aire.es
Sun Jul 13 05:37:30 EDT 2014


they are GPON specific FTTH endpoints, no way to mod them. Provider 
specific.

Call work, but caller ID is taken from Contact, so  NGCP-LB is 
displayed. I need wo swap From  - Contact fields to manage this issue.


El 13/07/2014 11:34, Lorenzo Mangani escribió:
> Leopoldo,
>
> Rather than helping you break the switch and staying cryptic - what 
> are those endpoints specifically, and do you have some traces to share 
> for successful and failing calls?
>
> Best,
>
> Lorenzo Mangani
>
> HOMER / PCAPTURE DEV TEAM
> Desk: +31 20 8080468 / +1 202-632-7227
> Mobile: +31 6 4603-2730
>
> QXIP BV - Capture Engineering
> Amsterdam, The Netherlands
> get at pcapture.com <mailto:get at pcapture.com>
>
>
>
>
>
> On Sun, Jul 13, 2014 at 11:28 AM, Leopoldo Iglesia 
> <liglesia at por-aire.es <mailto:liglesia at por-aire.es>> wrote:
>
>     There is no other way with this endpoints, as the network manager
>     told. I have to swap Sip header fields.
>     But, I already created a custom tt2 with Contact=<sip:$Ri> ... and
>     no modifications at all when calling.
>
>     Don´t know why.
>
>     El 13/07/2014 11:23, Lorenzo Mangani escribió:
>>     Leopoldo,
>>
>>     SEMS supports modifying the Contact header as shown in their
>>     example sbcprofile.conf (which will likely be the wrong approach
>>     as well as the easiest way to demolish your routing when not done
>>     properly) but since the underlying SIP issue is not clear to you
>>     either apparently so far, I would strongly suggest investigating
>>     other options first - having the Caller ID in the contact header
>>     surely outlines an issue with your setup/endpoints and not the
>>     CE. This being said:
>>
>>     #Contact=<sip:$Ri>
>>
>>     Link:
>>     https://github.com/sipwise/sems/blob/master/apps/sbc/etc/transparent.sbcprofile.conf
>>
>>
>>     Best,
>>
>>     Lorenzo Mangani
>>
>>     HOMER / PCAPTURE DEV TEAM
>>     Desk: +31 20 8080468 / +1 202-632-7227 <tel:%2B1%20202-632-7227>
>>     Mobile: +31 6 4603-2730
>>
>>     QXIP BV - Capture Engineering
>>     Amsterdam, The Netherlands
>>     get at pcapture.com <mailto:get at pcapture.com>
>>
>>
>>
>>
>>
>>     On Sun, Jul 13, 2014 at 11:04 AM, Leopoldo Iglesia
>>     <liglesia at por-aire.es <mailto:liglesia at por-aire.es>> wrote:
>>
>>         Hi!
>>
>>         I´m trying to modify Contact header info in SEMS config, but
>>         no working. I´m with 2.8 sipwise.
>>         I need to change, cause the endpoint requires from user ID to
>>         decode Caller ID on the contact header.
>>
>>         Sip issues... don´t know why is done this way, but I need to
>>         change it. Other operators are doing so, so it seems SBC can
>>         do it.
>>
>>         Any help on this?
>>
>>         Thanks
>>
>>
>>
>>         _______________________________________________
>>         Spce-user mailing list
>>         Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>         http://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     http://lists.sipwise.com/listinfo/spce-user
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20140713/f36c5539/attachment-0001.html>


More information about the Spce-user mailing list