[Spce-user] Rewrite rule problem

[Jorge Fresneda - Ibersontel]

Hello,

I note that in the manual ability to filter through the origin of the 
call is contemplated. My scenario is as follows:


Peer1 with priority 1
     Calle Prefix = blank
     Calle pattern = blank
     Caller Pattern = 91111111 (este es el llamante / subscriber)


Peer2 with priority 2
     Calle Prefix = blank
     Calle Pattern = blank
     Caller Pattern = blank
     Default rule!


Now, when I call the dessde 91111111, the call is sent by the "Peer2" 
and want it to be extended by the "Peer1", whatever the destination of 
the call. ¿Is possible?

Regards,
Jorge


El 12/06/2014 19:38, Daniel Grotti escribió:
> Hi,
> the peer is chosen using the callee prefix.
> So if you do not set callee prefix, probably the call goes out via another peer.
>
> Also, from the handbook:
>
> "The selection of peering servers for outbound calls is done in the following order:
> 1. whether caller or callee pattern matched.
> 2. length of the callee prefix.
> 3. priority of the peering group.
> 4. weight of the peering servers in the selected peering group.
>
> After one or more peering group(s) is matched for an outbound call, all servers in this group are tried, according to their weight (lower weight has more precedence). If a peering server replies with SIP codes 408, 500 or 503, or if a peering server doesn’t respond at all, the next peering server in the current peering group is used as a fallback, one after the other until the call succeeds. If no more servers are left in the current peering group, the next group which matches the peering rules is going to be used."
>
>
> Cheers,
> Daniel
>
>
>
>
> ----- Original Message -----
> From: "Jorge Fresneda - Ibersontel" <j.fresneda at ibersontel.com>
> To: spce-user at lists.sipwise.com
> Sent: Thursday, June 12, 2014 7:24:22 PM
> Subject: [Spce-user] Rewrite rule  problem
>
> Hello,
>
> I have a problem in "rewrite rules" on Peer. When I add a "Peering
> rule", if I write 34 or another number in the "Callee prefix" field and
> also write in "Caller Pattern", the call goes through this Peer
> correctly, but if I put blank "Callee prefix" field and write in "Caller
> Pattern" only, the call is not sent by this peer. What do I do wrong?
>
> Thank you,
> regards
> Jorge
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user