[Spce-user] Rewrite rule problem

[Daniel Grotti]

Hi,
mmm, that's strange...are you sure you have only that rules on your peer ?
In that case priority 1 should match Peer1.

Did you check your DB lcr table ?

Daniel







On 06/13/2014 10:06 AM, Jorge Fresneda - Ibersontel wrote:
> Hello,
>
> I note that in the manual ability to filter through the origin of the
> call is contemplated. My scenario is as follows:
>
>
> Peer1 with priority 1
>     Calle Prefix = blank
>     Calle pattern = blank
>     Caller Pattern = 91111111 (este es el llamante / subscriber)
>
>
> Peer2 with priority 2
>     Calle Prefix = blank
>     Calle Pattern = blank
>     Caller Pattern = blank
>     Default rule!
>
>
> Now, when I call the dessde 91111111, the call is sent by the "Peer2"
> and want it to be extended by the "Peer1", whatever the destination of
> the call. ¿Is possible?
>
> Regards,
> Jorge
>
>
> El 12/06/2014 19:38, Daniel Grotti escribió:
>> Hi,
>> the peer is chosen using the callee prefix.
>> So if you do not set callee prefix, probably the call goes out via
>> another peer.
>>
>> Also, from the handbook:
>>
>> "The selection of peering servers for outbound calls is done in the
>> following order:
>> 1. whether caller or callee pattern matched.
>> 2. length of the callee prefix.
>> 3. priority of the peering group.
>> 4. weight of the peering servers in the selected peering group.
>>
>> After one or more peering group(s) is matched for an outbound call,
>> all servers in this group are tried, according to their weight (lower
>> weight has more precedence). If a peering server replies with SIP
>> codes 408, 500 or 503, or if a peering server doesn’t respond at all,
>> the next peering server in the current peering group is used as a
>> fallback, one after the other until the call succeeds. If no more
>> servers are left in the current peering group, the next group which
>> matches the peering rules is going to be used."
>>
>>
>> Cheers,
>> Daniel
>>
>>
>>
>>
>> ----- Original Message -----
>> From: "Jorge Fresneda - Ibersontel" <j.fresneda at ibersontel.com>
>> To: spce-user at lists.sipwise.com
>> Sent: Thursday, June 12, 2014 7:24:22 PM
>> Subject: [Spce-user] Rewrite rule  problem
>>
>> Hello,
>>
>> I have a problem in "rewrite rules" on Peer. When I add a "Peering
>> rule", if I write 34 or another number in the "Callee prefix" field and
>> also write in "Caller Pattern", the call goes through this Peer
>> correctly, but if I put blank "Callee prefix" field and write in "Caller
>> Pattern" only, the call is not sent by this peer. What do I do wrong?
>>
>> Thank you,
>> regards
>> Jorge
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> http://lists.sipwise.com/listinfo/spce-user
>