[Spce-user] CE - Voicemail

[Daniel Grotti]

Can you share your kamailio-proxy.log regarding that CallID (at least
the internal loop part) ?

Thanks,
Daniel



On 03/24/2014 05:34 PM, Derrick Bradbury wrote:
> Should have also said, I'm on v3.1.. Sorry!
> 
> 
> ------------------------------------------------------------------------
> *From:* spce-user-bounces at lists.sipwise.com
> [spce-user-bounces at lists.sipwise.com] on behalf of Derrick Bradbury
> [derrickb at halex.com]
> *Sent:* Monday, March 24, 2014 12:30 PM
> *To:* spce-user at lists.sipwise.com
> *Subject:* [Spce-user] CE - Voicemail
> 
> Hi all...
> 
> I'm running CE on Virtualbox, and am having issues trying to get the
> voicemail to work..
> 
> To test I have  call forwarding set to the voicemail box.
> 
> From what I can see in the docs with the callflow the call is supposed
> to go:
> 
> Endpoint -> LB -> Proxy -> AppServer (voicemail)
> 
> But it is going:
> 
> Endpoint -> LB ->Proxy -> SBC -> dies
> 
> I have been pouring over logs the last little bit and see this:
> 
> Mar 21 19:40:50 spce proxy[3785]: INFO: <script>: No CF time destination
> set for CF map id '5' found, CF is done always -
> R=sip:user_FKpNTQML at sipce.halex.com
> ID=070e54c47e42ec7f7e6fa723037ea108 at 74.205.223.213
> Mar 21 19:40:50 spce proxy[3785]: NOTICE: <script>: CFU to destination
> 'sip:vmu1905642XXXX at voicebox.local' with timeout '300' activated -
> R=sip:vmu1905642XXXX at voicebox.local
> ID=070e54c47e42ec7f7e6fa723037ea108 at 74.205.223.XXX
> 
> It then jumps down to ROUTE_EXECUTE_CF_LOOP where it sends it to the SBC
> and somewhere in here I see:
> 
> Mar 21 20:29:49 spce sems[16908]: [#7f200fdfd700] [send,
> transport.cpp:98] DEBUG: send  msg#012--++--#012INVITE
> sip:vmu19056423835 at voicebox.local SIP/2.0#015#012Via: SIP/2.0/UDP
> 127.0.0.1:5080;branch=z9hG4bKb1f7Ta~I;rport#015#012From: "Halex"
> <sip:9057636529 at 74.205.223.213>;tag=7DE69E5E-532C932D0002B975-0F
> 
> and then:
> Mar 21 20:29:49 spce sems[16908]: [#7f200efef700] [run,
> udp_trsp.cpp:213] DEBUG: vv M [|] u recvd msg via UDP
> vv#012--++--#012SIP/2.0 404 Not Found#015#012Via: SIP/2.0/UDP
> 127.0.0.1:5080;branch=z9hG4bKb1f7Ta~I;rport=5080#015#012From: "Halex"
> <sip:9057636529 at 74.205.223.213>;tag=7DE69E5E-532C932D0002B975-0FEM
> 
> Which then gets relayed back up the line....
> 
> So looking at the logic, it will work if it goes to the app server
> instead of the SBC.. but am I missing something on the routing?
> 
> This seems to be my only show stopper right now...
> 
> Thanks,
> Derrick
> 
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
>