[Spce-user] New Install

[Horace Miles]

Ok,

I completely started from scratch.  Have all the services started with no errors.  I can connect to the web interface.  I have checked to make sure that the domain is correct.  I have changed the config.yml to only want username for login.  
I can telnet to the sipserver ip address 5060 and the sever responds.  However, when I try to connect with a sip client I get nothing whatsoever.  The proxy-log has nothing even showing a connection attempt.    Help.. what can I provide to have someone help me figure this out..?

-----Original Message-----
From: Andrew Pogrebennyk [mailto:apogrebennyk at sipwise.com] 
Sent: Friday, May 09, 2014 8:12 AM
To: Horace Miles
Cc: Alexander Lutay; spce-user at lists.sipwise.com
Subject: Re: [Spce-user] New Install

Hi,
the log you posted means that kamailio-proxy was not running and it failed to start because of incorrect rewrite rule in DB. I have to check that the admin panel correctly validates the input. Anyway, now that you have deleted the rewrite rule from DB please check that the proxy is
running: /etc/init.d/kamailio-proxy status If not re-start it. If you get the same error upon start, check mysql -e "select * from kamailio.dialplan;"
Then your client should be able to get some response back from the proxy.

Hope this helps.
Andrwe

On 05/09/2014 05:43 AM, Horace Miles wrote:
> Thanks for the reply,
> 
> In /var/log/ngcp/  the kamailio-proxy.log is empty In 
> /var/log/ngcp/old/  the kamilio-proxy.log shows the following.
> The domain is correct and the subscriber username and password are correct.
> 
> May  8 05:23:55 sip proxy[4894]: ERROR: <core> [pvapi.c:790]: pv_parse_spec2(): error searching pvar "caller_cc"
> May  8 05:23:55 sip proxy[4894]: ERROR: <core> [pvapi.c:994]: 
> pv_parse_spec2(): wrong char [)/41] in [$(caller_cc)\1] at [11 (1)] 
> May  8 05:23:55 sip proxy[4894]: ERROR: <core> [re.c:181]: 
> parse_repl(): subst_parser: bad specifier in replace part 
> $(caller_cc)\1 May  8 05:23:55 sip proxy[4894]: ERROR: dialplan 
> [dp_db.c:393]: build_rule(): failed to compile replacing expression 
> $(caller_cc)\1 May  8 05:23:55 sip proxy[4894]: ERROR: dialplan 
> [dp_db.c:111]: init_db_data(): failed to load database data May  8 
> 05:23:55 sip proxy[4894]: ERROR: dialplan [dialplan.c:200]: 
> mod_init(): could not initialize data May  8 05:23:55 sip proxy[4894]: 
> ERROR: <core> [sr_module.c:970]: init_mod(): init_mod(): Error while 
> initializing module dialplan 
> (/usr/lib/x86_64-linux-gnu/kamailio/modules/dialplan.so)
> 
> I deleted the dialpaln, peers, which also deleted the Rewrite Rules and reapplied ngcpcfg.