[Spce-user] sip:provider CE (public IP)

[Isaak (Web-e-volution)]

Ok, I was able to solve the commands issue below.

So I could execute successfully the command to advertise the public IP.
After that I run “ngcpcfg apply” to apply the update.

Problem persists. Is there something else I am missing?


W-E-V



El 14/11/2014, a las 17:36, Isaak (Web-e-volution) <i.mancia at web-e-volution.com> escribió:

> Thank you, Andrew.
> 
> Here is the output for the commands you said:
> root at spce:~# ngcp-network --set-interface=eth0 --advertised-ip=x.x.x.101
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> 	LANGUAGE = (unset),
> 	LC_ALL = (unset),
> 	LC_CTYPE = "UTF-8",
> 	LANG = (unset)
>    are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").
> root at spce:~# ngcpcfg apply
> Error: Invalid file syntax in /etc/ngcp-config/config.yml:
> Can't call method "write_string" on an undefined value at /usr/share/ngcp-ngcpcfg/helper//validate-yml line 15.
> root at spce:~#
> 
> 
> What am I doing wrong?
> 
> 
> W-E-V
> 
> 
> 
> El 14/11/2014, a las 09:02, Andrew Pogrebennyk <apogrebennyk at sipwise.com> escribió:
> 
>> Hi,
>> when you are saying public IP do you mean it has a real public IP or the
>> public one is mapped to private 1:1 as it's common with Amazon and in
>> other virtualized environments? if the latter, then you have only
>> private IP in /etc/ngcp-config/network.yml. So you need to set the
>> public IP as advertised IP. If your main interface name is eth0, just
>> execute:
>> ngcp-network --set-interface=eth0 --advertised-ip=YOUR_PUBLIC_IPADDR
>> ngcpcfg apply
>> 
>> Hope this helps.
>> Andrew
>> 
>> On 11/14/2014 03:37 PM, Isaak (Web-e-volution) wrote:
>>> Good Day.
>>> 
>>> I have downloaded SIP:PROVIDER_CE installed in VMware.
>>> 
>>> When running VM (running in my computer) through LAN, everything works fine.
>>> Endpoints using the same LAN can connect to the server, make calls, etc.
>>> 
>>> Now, I have a server with its own public IP. This server is not in my LAN. Is in another country, in fact.
>>> I have deployed to this server the VM as well. I have opened these ports in Firewall:
>>> 1443 tcp
>>> 2443 tcp
>>> 5060 tcp and udp
>>> 5061 tcp
>>> 1080 tcp
>>> 5222 tcp
>>> 5269 tcp
>>> 30000:40000 udp
>>> 
>>> Using WiFi, Endpoints can connect to the server. When a call is made, the receiving call Endpoint rings.
>>> The call is answered but the the call is ended automatically.
>>> The caller Endpoint keeps connected to the call until around 30 seconds when it gets disconnected.
>>> 
>>> So in other words, when SIP server uses a public IP, endpoints cannot establish a new call.
>>> 
>>> 
>>> Am I missing a port or something else? SIP:PROVIDER_CE can work in using a public network, right?
>>> 
>>> 
>>> 
>>> Regards,
>>> 
>>> W-E-V
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>> 
>> 
>> 
>