[Spce-user] SPCE 2.8, Kamailio LB only listening on lo

[George Mason]

Hi

I have just installed a new 2.8 instance but am unable to get the
Kamailio LB to listen on eth0. The interface is configured correctly and
I have checked network.yml, it looks like this:

hosts:
  self:
    eth0:
      ip: 203.x.x.x
      netmask: 255.255.255.248
      type:
        - web_ext
        - sip_ext
        - rtp_ext
        - ssh_ext
    interfaces:
      - lo
      - eth0
    lo:
      ip: 127.0.0.1
      netmask: 255.255.255.0
      shared_ip: []
      shared_v6ip: []
      type:
        - sip_int
        - ha_int
        - web_int
      v6ip: '::1'
    role:
      - proxy
      - lb
      - mgmt

Netstat shows that the only listener on UDP 5060 is on lo:

Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address        
State     
tcp        0      0 0.0.0.0:22              0.0.0.0:*              
LISTEN    
tcp        0      0 0.0.0.0:1080            0.0.0.0:*              
LISTEN    
tcp        0      0 127.0.0.1:25            0.0.0.0:*              
LISTEN    
tcp        0      0 127.0.0.1:8090          0.0.0.0:*              
LISTEN    
tcp        0      0 127.0.0.1:5060          0.0.0.0:*              
LISTEN    
tcp        0      0 127.0.0.1:5061          0.0.0.0:*              
LISTEN    
tcp6       0      0 :::2443                 :::*                   
LISTEN    
tcp6       0      0 :::80                   :::*                   
LISTEN    
tcp6       0      0 :::22                   :::*                   
LISTEN    
tcp6       0      0 ::1:25                  :::*                   
LISTEN    
tcp6       0      0 :::443                  :::*                   
LISTEN    
tcp6       0      0 :::1443                 :::*                   
LISTEN    
tcp6       0      0 ::1:5060                :::*                   
LISTEN    
tcp6       0      0 ::1:5061                :::*                   
LISTEN    
udp        0      0 127.0.0.1:5040         
0.0.0.0:*                         
udp        0      0 127.0.0.1:5060         
0.0.0.0:*                         
udp        0      0 127.0.0.1:5070         
0.0.0.0:*                         
udp        0      0 127.0.0.1:5080         
0.0.0.0:*                         
udp        0      0 127.0.0.1:4569         
0.0.0.0:*                         
udp        0      0 127.0.0.1:123          
0.0.0.0:*                         
udp6       0      0 127.0.0.1:2222         
:::*                              
udp6       0      0 127.0.0.1:2223         
:::*                              
udp6       0      0 ::1:5060               
:::*                              
udp6       0      0 ::1:123                
:::*                              
raw        0      0 0.0.0.0:255             0.0.0.0:*          

What am I missing? Am sure its obvious but can't see it. Could incorrect
iptables rules cause this?

Thanks

George