[Spce-user] site_domain

[Daniel Grotti]

Hi,
No, the http url must be the same of the SIP domain.

Daniel




On 11/26/2014 10:30 PM, Aziz Palmer wrote:
> got it, but no way of adding a different domain in the config.yml or
> anywhere else. if the url is different then the domain?
>
> ------------------------------------------------------------------------
> *From:* Daniel Grotti [dgrotti at sipwise.com]
> *Sent:* Wednesday, November 26, 2014 1:27 PM
> *To:* Aziz Palmer
> *Subject:* RE: site_domain
>
> Old CSC is not used anymore and you should not use it.
>
> Daniel
>
> On 26 Nov 2014 22:22, Aziz Palmer <Aziz.Palmer at AirFIBER.com> wrote:
>
>     you know how on the old site you can specify the domain in the
>     config.yml
>
>     is that still possible?
>
>
>     ------------------------------------------------------------------------
>     *From:* Daniel Grotti [dgrotti at sipwise.com]
>     *Sent:* Wednesday, November 26, 2014 1:21 PM
>     *To:* Aziz Palmer
>     *Subject:* RE: site_domain
>
>     So you have to specify the domain part then.
>
>     On 26 Nov 2014 22:15, Aziz Palmer <Aziz.Palmer at AirFIBER.com> wrote:
>
>         url is "portal2.gofiber.com"
>         site domain is "edge.gofiber.com"
>
>         i don't want the site domain to be the same as the url - i'm
>         splitting up the traffic
>
>         can i add something in the config?
>         ------------------------------------------------------------------------
>         *From:* Daniel Grotti [dgrotti at sipwise.com]
>         *Sent:* Wednesday, November 26, 2014 1:08 PM
>         *To:* Aziz Palmer
>         *Subject:* RE: site_domain
>
>         It should works if the URL is the same sip domain of the user.
>
>         On 26 Nov 2014 22:06, Aziz Palmer <Aziz.Palmer at AirFIBER.com>
>         wrote:
>
>             I did, try it
>
>             http://portal2.gofiber.comhttp://portal2.gofiber.com 
>
>             username: demo or demo at edge.gofiber.com
>             123456Go
>
>             tx-portal-2-ssh.gofiber.com
>             root
>             sipwise
>
>             this system should go into production asap thats why i
>             have so many questions
>             ------------------------------------------------------------------------
>             *From:* Daniel Grotti [dgrotti at sipwise.com]
>             *Sent:* Wednesday, November 26, 2014 1:00 PM
>             *To:* Aziz Palmer
>             *Cc:* spce-user at lists.sipwise.com
>             *Subject:* RE: site_domain
>
>             Dont use the old CSC.
>             Use the new listening on port 1443.
>
>             If you go to:
>
>             Https://mydomain.com:1443/login
>
>             Then instead of using john at mydomain.com, you can use only
>             john.
>
>             Daniel
>
>             Daniel
>
>             On 26 Nov 2014 21:57, Aziz Palmer
>             <Aziz.Palmer at AirFIBER.com> wrote:
>
>                 Hi Daniel!
>                 the subscriber can login but they need to enter there
>                 full username ex. john at voip.xyz.com i'm try to reduce
>                 the login to just john without the voip.gofiber.com
>                 using the new portal
>
>
>                 ------------------------------------------------------------------------
>                 *From:* Daniel Grotti [dgrotti at sipwise.com]
>                 *Sent:* Wednesday, November 26, 2014 12:54 PM
>                 *To:* Aziz Palmer
>                 *Cc:* spce-user at lists.sipwise.com
>                 *Subject:* Re: site_domain
>
>                 Hi,
>                 If you are using the new CSC panel it should work by
>                 default.
>                 New CSC is on https://ip:1443/login .
>                 Old CSC listening on port 80 is no longer used but
>                 still there in order to support soap.
>
>                 Daniel
>
>                 On 26 Nov 2014 21:46, Aziz Palmer
>                 <Aziz.Palmer at AirFIBER.com> wrote:
>
>                     You can simplify the login procedure for one SIP
>                     domain in such a way that users in this domain
>                     only need to pass
>                     the user part (e.g. user1) as a username instead
>                     of the full web username to log in by setting the
>                     parameter
>                     www_csc→site_domain in the config file
>                     /etc/ngcp-config/config.yml to the corresponding
>                     domain (e.g. 1.2.3.4)
>                     and execute ngcpcfg apply.
>
>                     I've add this but it doesn't seem to be working
>
>                     site_domain: voip.xyz.com
>
>                     is this the right syntax?
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20141127/e86015b2/attachment.html>