[Spce-user] Peering (Source & Pestination) IP addresses

Daniel Grotti dgrotti at sipwise.com
Fri Nov 7 04:21:14 EST 2014


Hi,
I'm not sure if I understood correctly, but in general what you can do
is to create 2 Peering, let's see with the same IP:port:

Peering A
Remote_IP:Remote_Port <-> Local_IP:5060


Peering B
Remote_IP:Remote_Port <-> Local_IP:5566



In this way remote Peering A should connecto to your port 5060 and
remote peer B should configure itself to connect to you to port 5566.
Now, they expect you to send them packet via the same ports, so from
5060 to peer A, from 5566 to peer B.
What you need to do is to set up the peer preferences 'outbound_socket'
on peer A, selecting Local_IP:5060 and on peer B the other socket
Local_IP:5566.

Is it what you were looking for ?


Daniel





On 11/06/2014 09:35 PM, Marc Storck wrote:
> I'm interested by this featute as well.
>
> In my case a peering could be setup between an remote ip:port tuple
> and an alternative local port. I don' necessarily need to use an alias
> Local IP.
>
> In the end this should provide the following:
>
> Peering A
> Remote_IP:Remote_Port <-> Local_IP:5060
>
> Peering B
> Remote_IP:Remote_Port <-> Local_IP:5566
>
> Where for Peering A and B the remote_ip and remote_port are identical,
> e.g. In both cases 203.0.113.1:5060.
>
> While on the SPCE side Peering A would use 198.51.100.1:5060 and
> Peering B would use 198.51.100.1:5566, alternatively Peering A uses
> 198.51.100.1:5060 and Peering B uses 198.51.100.2:5060.
>
> Of course SPCE would have to comply with this as well for outbound
> calls to Peering A and Peering B respectively.
>
> Regards,
>
> Marc
>
>
>
> On 6 nov. 2014, at 20:38, Aziz Palmer <Aziz.Palmer at AirFIBER.com
> <mailto:Aziz.Palmer at AirFIBER.com>> wrote:
>
>> Good Afternoon,
>> Not sure if this is possible but here is what i'm hoping for:
>>
>> Currently when an inbound calls comes from a sip peer it matches the
>> source ip address of the sip peer. I have setup multiple alias IP
>> addresses and would like to match up not only the ip address of the
>> peer but the alias ip address it is listening on?
>>
>>
>> Thank you again for all your help SPCE Team has been providing us!
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20141107/81176e1e/attachment-0001.html>


More information about the Spce-user mailing list