[Spce-user] No voice comes through

[Daniel Grotti]

Hi,
the mediaproxy is set by NGCP to 10.0.0.248.
Is that right ? is that reachable by the clients ?

Daniel



On 10/23/2014 01:55 PM, Tobi Szyndler wrote:
> Hi list
>
> I installed the community edition in a testing environment (SPCE v2.8
> LTS on Debian GNU/Linux 6.0.10 (squeeze))
> Two subscibers connect to the server from a routed network (server
> 192.168.11.0/24 clients 172.27.1.0/24 The networks are routed NOT nated
> on the firewall). The connection works and these two subscribers can
> call the other (and vice versa). The problem is that there is no voice
> when pickup the phone, but the phones ring properly.
> I already tried the following described here:
> https://www.sipwise.com/doc/2.8/spce/ar01s05.html#_audiocodes_devices_workaround
> but that did not change anything so far.
> I attached a sip-dump.txt from two tries to call the other side.
> Hopefully that helps to narrow down the problem
>
> Thanks a lot for any help
> Regards
>
> tobi
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20141027/35b72ace/attachment-0001.html>