[Spce-user] No rewrite on T.38 INVITE

Daniel Grotti dgrotti at sipwise.com
Mon Aug 24 05:09:21 EDT 2015


would help to see LB an PROXY log.


--
Daniel Grotti
VoIP Engineer


Sipwise GmbH
Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com

On 08/24/2015 10:35 AM, Tristan Delsol wrote:
> Daniel,
> 
> I have no clue :)
> 
> Here the re-invite before I rewrite the request-uri and the 404 response:
> INVITE
> sip:ngcp-lb;tgrp=9752;trunk-context=ipic.imscore.net at 87.239.101.193:5060;ngcpct=7369703a3132372e302e302e313a35303830
> SIP/2.0
> Via: SIP/2.0/UDP 139.156.126.49:5060;branch=z9hG4bKfofomd006o71lno6s1i0.1
> Call-ID: 585966869312000201754 at 192.168.111.25_b2b-1
> From:
> <sip:+31306665648 at ims.imscore.net>;tag=SDemtl399-127.0.0.1alUtKGp-09752+1+a3000095+156d2c30
> 
> To:
> <sip:+31756418049 at 192.168.111.25>;tag=3D534336-55D9A6A9000B9F71-7E3B2700
> CSeq: 98894742 INVITE
> Expires: 180
> Contact: <sip:+31306665648 at 139.156.126.49:5060;transport=udp>
> Min-SE: 90
> Session-Expires: 7200;refresher=uac
> Supported: replaces, path, 100rel, timer
> Content-Length: 276
> Allow: INVITE, BYE, REGISTER, ACK, OPTIONS, CANCEL, SUBSCRIBE, NOTIFY,
> PRACK, INFO, REFER, UPDATE, PUBLISH, MESSAGE
> Max-Forwards: 69
> Content-Type: application/sdp
> User-Agent: Alcatel-Lucent 5060 MGC-8 9.2.0.4.0.11
> Route:
> <sip:87.239.101.193;r2=on;lr=on;ftag=3D534336-55D9A6A9000B9F71-7E3B2700;ngcplb=yes>
> 
> Route:
> <sip:127.0.0.1;r2=on;lr=on;ftag=3D534336-55D9A6A9000B9F71-7E3B2700;ngcplb=yes>
> 
> 
> v=0
> o=- 3649316138 3649316139 IN IP4 139.156.126.49
> s=-
> c=IN IP4 139.156.126.49
> t=0 0
> m=image 23680 udptl t38
> a=T38FaxVersion:0
> a=T38MaxBitRate:14400
> a=T38FaxRateManagement:transferredTCF
> a=T38FaxMaxBuffer:72
> a=T38FaxMaxDatagram:316
> a=T38FaxUdpEC:t38UDPRedundancy
> 
> 
> SIP/2.0 404 Not Found
> Via: SIP/2.0/UDP
> 139.156.126.49:5060;rport=5060;branch=z9hG4bKfofomd006o71lno6s1i0.1
> Call-ID: 585966869312000201754 at 192.168.111.25_b2b-1
> From:
> <sip:+31306665648 at ims.imscore.net>;tag=SDemtl399-127.0.0.1alUtKGp-09752+1+a3000095+156d2c30
> 
> To:
> <sip:+31756418049 at 192.168.111.25>;tag=3D534336-55D9A6A9000B9F71-7E3B2700
> CSeq: 98894742 INVITE
> Server: Sipwise NGCP Proxy 3.X
> Content-Length: 0
> 
> Tristan
> 
> 
> On 24-08-15 09:08, Daniel Grotti wrote:
>> Hi,
>> how can you receive a 404 on a re-invite ?
>> Does the re-invite have the From-tag and To-tag ?
>>
>>
>> -- 
>> Daniel Grotti
>> VoIP Engineer
>>
>>
>> Sipwise GmbH
>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>
>> On 08/24/2015 12:23 AM, Tristan Delsol wrote:
>>> Checked a lot of things but I'm still getting a 404 not found from spce.
>>> I managed to change the request-uri from
>>> sip:ngcp-lb;tgrp=9752;trunk-context=ipic.imscore.net at 87.239.101.193:5060;ngcpct=7369703a3132372e302e302e313a35303830
>>>
>>> to
>>> sip:ngcp-lb at 87.239.101.193:5060;ngcpct=7369703a3132372e302e302e313a35303830,
>>>
>>> but I'm still getting a 404 not found.
>>> Shouldn't this work?
>>> I mean the spce is sending this as Contact.
>>>
>>> Tristan
>>>
>>> On 2015-08-21 14:25, Daniel Grotti wrote:
>>>> Hi,
>>>> yes something like:
>>>>
>>>> if(is_method("INVITE") && uri =~ "^sip:ngcp-lb;tgrp.+@")
>>>>
>>>>
>>>>
>>>> -- 
>>>> Daniel Grotti
>>>> VoIP Engineer
>>>>
>>>>
>>>> Sipwise GmbH
>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>>
>>>> On 08/20/2015 07:44 PM, Tristan Delsol wrote:
>>>>> Hi Daniel,
>>>>>
>>>>> The only problem is actually that the telco sends this weird invite
>>>>> with
>>>>> the following request-uri:
>>>>> sip:ngcp-lb;tgrp=9752;trunk-context=ipic.imscore.net at 87.239.101.193:5060;ngcpct=7369703a3132372e302e302e313a35303830
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> If I could maybe rewrite this to remove the
>>>>> ";tgrp=9752;trunk-context=ipic.imscore.net" or send a 488 then I
>>>>> should
>>>>> be good.
>>>>>
>>>>> Could I add something to
>>>>> /etc/ngcp-config/templates/etc/kamailio/proxy/proxy.cfg.customtt.tt2
>>>>> like
>>>>> if(is_method("INVITE") &&
>>>>> search("tgrp=9752;trunk-context=ipic.imscore.net"))
>>>>> {
>>>>>     sl_send_reply("488", "Not Acceptable Here");
>>>>>     exit;
>>>>> }
>>>>>
>>>>> Thanks,
>>>>> Tristan
>>>>>
>>>>> On 2015-08-20 16:15, Tristan Delsol wrote:
>>>>>> The reason is that the interconnect with our telco is tripping over
>>>>>> our contact-header of ngcplb@<ip> only with T.38, because of the
>>>>>> re-invite.
>>>>>> They hide behind the fact that they have a spec for the interconnect
>>>>>> that only wants phonenumber@<ip>or<dns> in the contact-header.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 20-08-15 16:05, Daniel Grotti wrote:
>>>>>>> Hi,
>>>>>>> any reason for that ?
>>>>>>> The callee should reply 488, not the server.
>>>>>>> Anyway, I remember some old threasd about that:
>>>>>>> https://lists.sipwise.com/pipermail/spce-user/2014-June/006788.html
>>>>>>>
>>>>>>> Maybe this could help.
>>>>>>>
>>>>>>> -- 
>>>>>>> Daniel Grotti
>>>>>>> VoIP Engineer
>>>>>>>
>>>>>>>
>>>>>>> Sipwise GmbH
>>>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>>>>>
>>>>>>> On 08/20/2015 03:41 PM, Tristan Delsol wrote:
>>>>>>>> Back again on this :)
>>>>>>>>
>>>>>>>> One more thing. Would it be possible to disable T.38 support
>>>>>>>> somehow. So
>>>>>>>> that if the RE-INVITE comes in that we send back a 488?
>>>>>>>> Or maybe I can set it up for certain subscriber numbers?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Tristan
>>>>>>>>
>>>>>>>> On 17-08-15 17:01, Tristan Delsol wrote:
>>>>>>>>> Thanks for the info. I will experiment with that to see if it
>>>>>>>>> works.
>>>>>>>>> Then I will check if we would really want that or not.
>>>>>>>>>
>>>>>>>>> Tristan
>>>>>>>>>
>>>>>>>>> On 17-08-15 16:58, Andrew Pogrebennyk wrote:
>>>>>>>>>> On 08/17/2015 03:39 PM, Tristan Delsol wrote:
>>>>>>>>>>> They state that they don't support that format for the contact
>>>>>>>>>>> header.
>>>>>>>>>>> They have it in the specs for the interconnect that the contact
>>>>>>>>>>> header
>>>>>>>>>>> can only contain the following:
>>>>>>>>>>> sip:+«ISN»@«ip-address/URL»:«port» with optional
>>>>>>>>>>> user=”phone”, so
>>>>>>>>>>> for
>>>>>>>>>>> example sip:+31703434343 at domain.net:5060;user=”phone”.
>>>>>>>>>>>
>>>>>>>>>>> Where
>>>>>>>>>>> ISN: International Subscriber Number
>>>>>>>>>>> port: UDP portnumber;
>>>>>>>>>>> URL: Uniform Resource Locator: domain name;
>>>>>>>>>>>
>>>>>>>>>>> Is it possible I can adjust the contact header for this kind of
>>>>>>>>>>> request
>>>>>>>>>>> to keep the format as needed?
>>>>>>>>>>
>>>>>>>>>> Unfortunately this is not something you can easily achieve,
>>>>>>>>>> but if
>>>>>>>>>> you
>>>>>>>>>> have some understanding of kamailio config scripts you can try to
>>>>>>>>>> modify
>>>>>>>>>> /etc/ngcp-config/templates/etc/kamailio/lb/kamailio.cfg.tt2
>>>>>>>>>> and disable the Contact masking completely, e.g. comment out all
>>>>>>>>>> calls
>>>>>>>>>> of ROUTE_MASK_CONTACT and ROUTE_UNMASK_CONTACT as a starting
>>>>>>>>>> point.
>>>>>>>>>>
>>>>>>>>>> Then each side will receive the internal IP of b2b as Contact:
>>>>>>>>>> sip:127.0.0.1:5080, which exposes your topology a bit to outside
>>>>>>>>>> but
>>>>>>>>>> still doesn't break the protocol. But we are not sending the
>>>>>>>>>> number part
>>>>>>>>>> which might be a problem for them (they didn't say that the
>>>>>>>>>> number
>>>>>>>>>> part
>>>>>>>>>> is optional). Sorry I can't help you out more at this time.
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>> Andrew
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Spce-user mailing list
>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>> _______________________________________________
>>>>>>>> Spce-user mailing list
>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user



More information about the Spce-user mailing list