[Spce-user] second network interface

Andres Gmail aruizmorillas at gmail.com
Thu Feb 19 12:11:42 EST 2015


Then add the second interface in config.yml . I know that rtp_engine 
could be a problem.... Good luck.

El 19/02/15 a las 18:05, Mykola Zaika escribió:
> I need both interfaces. When I change move-from=eth0 instead of 
> --move-from=lo
> than Eth0 does not work.
>
> -- 
> З повагою,
> Микола Заїка
> Компанія VoIPTime,
> Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> www.voiptime.net <http://www.voiptime.net>
>
> 2015-02-19 18:53 GMT+02:00 William Fulton <wfulton at thirdhatch.com 
> <mailto:wfulton at thirdhatch.com>>:
>
>     *From:*William Fulton
>     *Sent:* Thursday, February 19, 2015 8:53 AM
>     *To:* 'Mykola Zaika'
>     *Subject:* RE: [Spce-user] second network interface
>
>     If you have already assigned these functions to eth0, you must
>     change your syntax in step 2 to:
>
>     --move-from=eth0 instead of --move-from=lo
>
>     *From:*Spce-user [mailto:spce-user-bounces at lists.sipwise.com] *On
>     Behalf Of *Mykola Zaika
>     *Sent:* Thursday, February 19, 2015 8:48 AM
>     *To:* Spce-user
>     *Subject:* [Spce-user] second network interface
>
>     Hello,
>
>     I added second network interface to my sipwise CE (eth1). But all
>     my traffic go via Eth0. What I`m doing wrong?
>
>     1. vi /etc/network/interfaces
>
>     auto lo
>     iface lo inet loopback
>
>     # The primary network interface
>     auto eth0
>     iface eth0 inet static
>     address 10.200.10.250
>     netmask 255.255.255.0
>     gateway 10.200.10.254
>     dns-nameservers 10.130.10.12
>
>     auto eth1
>     iface eth1 inet static
>     address 10.130.10.250
>     netmask 255.255.255.0
>
>     2.run comands :
>
>     - ngcp-network --set-interface=eth1 --ip=10.130.10.250
>     --netmask=255.255.255.0
>
>     - ngcp-network --move-from=lo --move-to=eth1 --type=web_ext
>     --type=sip_ext --type=rtp_ext -- type=ssh_ext --type=web_int
>
>     3. ngcpcfg apply
>
>
>     -- 
>
>     З повагою,
>
>     Микола Заїка
>
>     Компанія VoIPTime,
>
>     Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
>
>     mzaika at voiptime.net <mailto:mzaika at voiptime.net>
>
>     www.voiptime.net <http://www.voiptime.net>
>
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     https://lists.sipwise.com/listinfo/spce-user
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-- 
Saludos
---
Andrés Ruiz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150219/88437425/attachment-0001.html>


More information about the Spce-user mailing list