[Spce-user] second network interface
Daniel Grotti
dgrotti at sipwise.com
Fri Feb 20 09:40:29 EST 2015
ok, maybe a typo.
good.
On 02/20/2015 03:24 PM, Mykola Zaika wrote:
> Daniel your config does not work.
> I changed config and its work.
>
> hosts:
> self:
> dbnode: 1
> eth0:
> ip: 10.200.10.250
> netmask: 255.255.255.0
> type:
> - web_ext
> - ssh_ext
> - web_int
> eth1:
> ip: 10.130.10.250
> netmask: 255.255.255.0
> type:
> - web_ext
> - sip_ext
> - rtp_ext
> - ssh_ext
> - web_int
> interfaces:
> - lo
> - eth0
> - eth1
> lo:
> cluster_sets:
> - default
> ip: 127.0.0.1
> netmask: 255.255.255.0
> shared_ip: []
> shared_v6ip: []
> type:
> - sip_int
> - web_int
> - ha_int
> - aux_ext
> - ssh_ext
> v6ip: '::1'
> role:
> - proxy
> - lb
> - mgmt
> - rtp
> - db
>
> Also in config.yml I specify a new sip socket.
>
> extra_sockets:
> test: udp:10.200.10.250:5060 <http://10.200.10.250:5060>
>
> --
> З повагою,
> Микола Заїка
> Компанія VoIPTime,
> Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> www.voiptime.net <http://www.voiptime.net>
>
> 2015-02-20 14:17 GMT+02:00 Daniel Grotti <dgrotti at sipwise.com
> <mailto:dgrotti at sipwise.com>>:
>
> Hi,
> this config should work...
>
>
>
>
> hosts:
> self:
> dbnode: 1
> eth0:
> ip: 10.200.10.250
> netmask: 255.255.255.0
> type:
> - web_ext
> - ssh_ext
> - web_int
> - sip_ext
> - rtp_ext
> eth1:
> ip: 10.130.10.250
> netmask: 255.255.255.0
> type:
> - web_ext
> - sip_ext
> - ssh_ext
> - web_int
> interfaces:
> - lo
> - eth0
> - eth1
> lo:
> cluster_sets:
> - default
> ip: 127.0.0.1
> netmask: 255.255.255.0
> shared_ip: []
> shared_v6ip: []
> type:
> - sip_int
> - web_int
> - ha_int
> - aux_ext
> - ssh_ext
> v6ip: '::1'
> role:
> - proxy
> - lb
> - mgmt
> - rtp
> - db
>
> On 02/19/2015 10:17 PM, Mykola Zaika wrote:
> > Eth0 is internal network interface (LAN), subscribers will be connected
> > to this interface also several peers. Eth1 is external network
> > interface (Real internet ip address ). All my peers will be registred
> > on this interface (Eth1). All calls go "phone_A - Asterisk_Pbx- Eth0
> > sipwise .... Eth1 sipwise- peer provider - phone_B"
> >
> > 19 лют. 2015 22:32, користувач "Daniel Grotti" <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
> > <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>> написав:
> >
> > It depends what do you want to do.
> > Do you want to use the second interface as external interface ?
> > Cause if it's so, you need to change your config.
> >
> > Please explain what do you have to do.
> >
> > Daniel
> >
> >
> > On 02/19/2015 09:20 PM, Mykola Zaika wrote:
> > > I moved the "cluster sets" section to the Eth0. Is that
> correct? Where
> > > can I find some example network.yml with two network intefaces?
> > > hosts:
> > > self:
> > > dbnode: 1
> > > eth0:
> > > ip: 10.200.10.250
> > > netmask: 255.255.255.0
> > > type:
> > > - web_int
> > > - ssh_ext
> > > - web_ext
> > > - sip_int
> > > - rtp_int
> > > cluster_sets:
> > > - default
> > > ip: 127.0.0.1
> > > netmask: 255.255.255.0
> > > shared_ip: []
> > > shared_v6ip: []
> > > type:
> > > - ha_int
> > > - aux_ext
> > > v6ip: '::1'
> > > eth1:
> > > ip: 10.130.10.250
> > > netmask: 255.255.255.0
> > > type:
> > > - web_ext
> > > - sip_ext
> > > - rtp_ext
> > > - ssh_ext
> > > - web_int
> > > interfaces:
> > > - lo
> > > - eth0
> > > - eth1
> > > lo:
> > > role:
> > > - proxy
> > > - lb
> > > - mgmt
> > > - rtp
> > > - db
> > >
> > > 19 лют. 2015 19:44, користувач "Daniel Grotti"
> > <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
> <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>
> > > <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
> <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>>> написав:
> > >
> > > You should move the cluster_set section to eth0 which is your new
> > > internal interface.
> > >
> > > Why you add a new interface? To get rid of localhost? Or to add a
> > > new public ip for sip ?
> > >
> > > On 19 Feb 2015 18:39, Mykola Zaika <mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> > > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>>> wrote:
> > >
> > > hosts:
> > > self:
> > > dbnode: 1
> > > eth0:
> > > ip: 10.200.10.250
> > > netmask: 255.255.255.0
> > > type:
> > > - web_int
> > > - ssh_ext
> > > - web_ext
> > > - sip_int
> > > - rtp_int
> > > eth1:
> > > ip: 10.130.10.250
> > > netmask: 255.255.255.0
> > > type:
> > > - web_ext
> > > - sip_ext
> > > - rtp_ext
> > > - ssh_ext
> > > - web_int
> > > interfaces:
> > > - lo
> > > - eth0
> > > - eth1
> > > lo:
> > > cluster_sets:
> > > - default
> > > ip: 127.0.0.1
> > > netmask: 255.255.255.0
> > > shared_ip: []
> > > shared_v6ip: []
> > > type:
> > > - ha_int
> > > - aux_ext
> > > v6ip: '::1'
> > > role:
> > > - proxy
> > > - lb
> > > - mgmt
> > > - rtp
> > > - db
> > >
> > >
> > > --
> > > З повагою,
> > > Микола Заїка
> > > Компанія VoIPTime,
> > > Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> > > mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>>
> > > www.voiptime.net <http://www.voiptime.net> <http://www.voiptime.net>
> > <http://www.voiptime.net>
> > >
> > > 2015-02-19 19:36 GMT+02:00 Daniel Grotti
> > <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
> <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>
> > > <mailto:dgrotti at sipwise.com
> <mailto:dgrotti at sipwise.com> <mailto:dgrotti at sipwise.com
> <mailto:dgrotti at sipwise.com>>>>:
> > >
> > > Sip_int should be assigned to 'lo' only.
> > > Can you share your network.yml ?
> > >
> > > On 19 Feb 2015 18:30, Mykola Zaika
> > <mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> > > <mailto:mzaika at voiptime.net
> <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>>> wrote:
> > >
> > > Yes, I assigned Eth0 as type=sip_int, type=
> > rtp_int and
> > > Eth1 as type=sip_ext, type=rtp_ext.
> > >
> > >
> > > --
> > > З повагою,
> > > Микола Заїка
> > > Компанія VoIPTime,
> > > Тел: +380 32 2328022 <tel:%2B380%2032%202328022> <tel:%2B380%2032%202328022>
> > <tel:%2B380%2032%202328022>
> > > mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>>
> > > www.voiptime.net <http://www.voiptime.net>
> <http://www.voiptime.net>
> > <http://www.voiptime.net>
> > >
> > > 2015-02-19 19:15 GMT+02:00 Daniel Grotti
> > > <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
> <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>
> > <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
> <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>>>:
> > >
> > > Did you specify sip_ext to eth1?
> > > On 19 Feb 2015 18:05, Mykola Zaika
> > > <mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>>>
> > > wrote:
> > > >
> > > > I need both interfaces. When I change
> > > move-from=eth0 instead of --move-from=lo
> > > > than Eth0 does not work.
> > > >
> > > > --
> > > > З повагою,
> > > > Микола Заїка
> > > > Компанія VoIPTime,
> > > > Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> > <tel:%2B380%2032%202328022> <tel:%2B380%2032%202328022>
> > > > mzaika at voiptime.net
> <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>>
> > > > www.voiptime.net <http://www.voiptime.net> <http://www.voiptime.net>
> > <http://www.voiptime.net>
> > > >
> > > > 2015-02-19 18:53 GMT+02:00 William Fulton
> > > <wfulton at thirdhatch.com <mailto:wfulton at thirdhatch.com>
> > <mailto:wfulton at thirdhatch.com <mailto:wfulton at thirdhatch.com>>
> > > <mailto:wfulton at thirdhatch.com
> <mailto:wfulton at thirdhatch.com>
> > <mailto:wfulton at thirdhatch.com <mailto:wfulton at thirdhatch.com>>>>:
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> From: William Fulton
> > > >> Sent: Thursday, February 19, 2015 8:53 AM
> > > >> To: 'Mykola Zaika'
> > > >> Subject: RE: [Spce-user] second network
> > interface
> > > >>
> > > >>
> > > >>
> > > >> If you have already assigned these
> functions to
> > > eth0, you must change your syntax in
> step 2 to:
> > > >>
> > > >> --move-from=eth0 instead of
> --move-from=lo
> > > >>
> > > >>
> > > >>
> > > >> From: Spce-user
> > >
> [mailto:spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>
> > <mailto:spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>>
> > >
> <mailto:spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>
> > <mailto:spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>>>] On
> > > Behalf Of Mykola Zaika
> > > >> Sent: Thursday, February 19, 2015 8:48 AM
> > > >> To: Spce-user
> > > >> Subject: [Spce-user] second network
> interface
> > > >>
> > > >>
> > > >>
> > > >> Hello,
> > > >>
> > > >> I added second network interface to my
> > sipwise CE
> > > (eth1). But all my traffic go via Eth0.
> What I`m
> > > doing wrong?
> > > >>
> > > >> 1. vi /etc/network/interfaces
> > > >>
> > > >> auto lo
> > > >> iface lo inet loopback
> > > >>
> > > >> # The primary network interface
> > > >> auto eth0
> > > >> iface eth0 inet static
> > > >> address 10.200.10.250
> > > >> netmask 255.255.255.0
> > > >> gateway 10.200.10.254
> > > >> dns-nameservers 10.130.10.12
> > > >>
> > > >> auto eth1
> > > >> iface eth1 inet static
> > > >> address 10.130.10.250
> > > >> netmask 255.255.255.0
> > > >>
> > > >> 2.run comands :
> > > >>
> > > >> - ngcp-network --set-interface=eth1
> > > --ip=10.130.10.250 --netmask=255.255.255.0
> > > >>
> > > >> - ngcp-network --move-from=lo
> --move-to=eth1
> > > --type=web_ext --type=sip_ext
> --type=rtp_ext --
> > > type=ssh_ext --type=web_int
> > > >>
> > > >> 3. ngcpcfg apply
> > > >>
> > > >>
> > > >> --
> > > >>
> > > >> З повагою,
> > > >>
> > > >> Микола Заїка
> > > >>
> > > >> Компанія VoIPTime,
> > > >>
> > > >> Тел: +380 32 2328022
> > <tel:%2B380%2032%202328022>
> > > >>
> > > >> mzaika at voiptime.net
> <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> > <mailto:mzaika at voiptime.net <mailto:mzaika at voiptime.net>>>
> > > >>
> > > >> www.voiptime.net <http://www.voiptime.net> <http://www.voiptime.net>
> > <http://www.voiptime.net>
> > > >>
> > > >>
> > > >> _______________________________________________
> > > >> Spce-user mailing list
> > > >> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> > <mailto:Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>>
> > > <mailto:Spce-user at lists.sipwise.com
> <mailto:Spce-user at lists.sipwise.com>
> > <mailto:Spce-user at lists.sipwise.com
> <mailto:Spce-user at lists.sipwise.com>>>
> > > >>
> https://lists.sipwise.com/listinfo/spce-user
> > > >>
> > > >
> > >
> > >
> > >
> >
>
>
More information about the Spce-user
mailing list