[Spce-user] Peering two SPCE over TLS

Daniel Grotti dgrotti at sipwise.com
Sun Jan 18 06:47:30 EST 2015


Hi, 
looks like the tcp connection got timeout. 
Are you sure to have the port you need opened (5060 tcp and 5061 tcp) ? 

Daniel 


----- Original Message -----

From: "H Yavari" <hyavari at rocketmail.com> 
To: "Daniel Grotti" <dgrotti at sipwise.com>, spce-user at lists.sipwise.com 
Sent: Sunday, January 18, 2015 8:43:42 AM 
Subject: Re: [Spce-user] Peering two SPCE over TLS 

Hi, 
I tested it with TCP and I received "ERROR: <core> [tcp_main.c:4422]: tcpconn_main_timeout(): connect Public IP of peer server :5060 failed (timeout)" 


Regards, 
H. Yavari 

From: Daniel Grotti <dgrotti at sipwise.com> 


No, as long as the message its relay in TLS with no errors, there are no problems. 
I guess it fails for timeout, since you don't get any message on the peer side, isn't? 
Daniel 


On 17 Jan 2015 14:17, H Yavari <hyavari at rocketmail.com> wrote: 



Hi, 

Yes I checked, There isn't any error and I see "transport=tls" too. 
I should define any thing on the other server? 


Regards, 
H. Yavari 


From: Daniel Grotti <dgrotti at sipwise.com> 


Can you check in the LB log you see what's happening? Do you see errors? Do you see its using TLS socket ? 
Daniel 


On 17 Jan 2015 13:35, H Yavari <hyavari at rocketmail.com> wrote: 

<blockquote>

Hi, 
I mean in the proxy-log, not any request received by peer server. Yes I checked and TLS is enabled on 5061 port. 

Regards, 
H. Yavari 


From: Daniel Grotti <dgrotti at sipwise.com> 


Hi, 
What do you mean no message received on the peer? 
Did you enable TLS on your server in config.yml? 

What does the kamailio-lb.log say? 

DanielOn 17 Jan 2015 13:08, H Yavari < hyavari at rocketmail.com > wrote: 
> 
> Hi, 
> 
> I want to create a trunk between 2 CPE in the internet over TLS, and only one of them has static ip address. I checked config.yml too and TLS is enabled on both server. 
> So I defined an peer server with TLS protocol over port 5061 in that server that has dynamic ip. But when I make a call on this server, not any request received in the other Server. (Everything is ok over UDP ) 
> 
> How can I solve this ? Should I defined any peer on the other Server? 
> 
> 
> 
> Regards, 
> H. Yavari 








</blockquote>




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150118/22dad500/attachment-0001.html>


More information about the Spce-user mailing list