[Spce-user] Peering two SPCE over TLS

Tue Jan 20 07:39:51 EST 2015

Hi,How can I change the peer port listening in this configs:?
something like this is right:
domain=X.X.X.X :5066
 user=100011
 pwd=pincode100011
 proxy=sip:127.0.0.1:5060
 contact=sip:192.168.X.Z:5060 

Regards, H. Yavari 
     From: Daniel Grotti <dgrotti at sipwise.com>

 Did you check the flag "peer_auth_register" in the web interface ?

 Also, you can check the statu of the registration in table kamailio.sems_registrations.

 Daniel

 On 01/20/2015 12:59 PM, Daniel Grotti wrote:

If you check kamailio-lb you should see logs line like "b2bua outbound registration".

 Daniel

 On 01/20/2015 12:55 PM, H Yavari wrote:

  Hi, cat  /etc/ngcp-sems/etc/reg_agent.conf output: 
  domain=X.X.X.X (ip static)
 user=100011
 pwd=pincode100011
 proxy=sip:127.0.0.1:5060
 contact=sip:192.168.X.Z:5060 (ip internal) 
  proxy and contact info applied automatically after "ngcpcfg apply". 
  I checked subscriber 100011 in the peer server but not registered any device for it. 

  Thanks for helps. 
  Regards, H. Yavari 

      From: Daniel Grotti <dgrotti at sipwise.com>

   Hi,
 did you commented out all the lines in /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2 ?

 domain=<your peer realm>
 user=<your peer user>
 pwd=<your peer password>
 proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
 [% IF sip_adv_ips.size -%]
 contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
 [% ELSE -%]
 contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
 [% END -%]

 contact line is missing, you should see something like:

 cat /etc/ngcp-sems/etc/reg_agent.conf

 domain=ip_ext:static
 user=100011
 pwd=pincode100011
 proxy=sip:127.0.0.1:5060
 contact=sip:XX.XX.XX.XX:5060

 Daniel

 On 01/19/2015 02:11 PM, H Yavari wrote:

      Hi, It is my scenario: 

  CPE(#1)        <------------------------>    CPE(#2) ip_ext: dynamic                               ip_ext:static 
  I want create a sip trunk between them. I defined a peer server in CPE#1 for communicating with CPE#2. I did below configurations  too: (/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2)

  domain=ip_ext:static
 user=100011
 pwd=pincode100011
 proxy=sip:127.0.0.1:5060

  But CPE#1 not registered in CPE#2. 
  What is the best solution for trubking between 2 CPE? 

      Thanks for helps. 
  Regards, H. Yavari 

        From: Daniel Grotti <dgrotti at sipwise.com>

    Hi, looks like the tcp connection got  timeout. Are you sure to have the port you need  opened (5060 tcp and 5061 tcp) ? 
  Daniel 

   From: "H Yavari" <hyavari at rocketmail.com>
 To: "Daniel Grotti" <dgrotti at sipwise.com>, spce-user at lists.sipwise.com
 Sent: Sunday, January 18, 2015 8:43:42 AM
 Subject: Re: [Spce-user] Peering two SPCE  over TLS

   Hi, I tested it with TCP and I  received "ERROR: <core> [tcp_main.c:4422]: tcpconn_main_timeout():  connect Public IP of peer  server :5060 failed (timeout)" 

  Regards, H. Yavari
      From: Daniel Grotti <dgrotti at sipwise.com>

   No, as long as the message its relay in TLS  with no errors, there are no problems. I guess it fails for timeout, since you don't get  any message on the peer side,  isn't? Daniel 

    On 17 Jan 2015 14:17, H Yavari <hyavari at rocketmail.com> wrote:

   Hi, 
  Yes I checked, There isn't any error and I see "transport=tls" too. I should define any thing on the other server? 

  Regards, H. Yavari 
     From: Daniel Grotti <dgrotti at sipwise.com>

   Can you check in the LB log you see what's happening? Do you see  errors? Do you see its using TLS socket ? Daniel 

   On 17 Jan 2015 13:35, H Yavari <hyavari at rocketmail.com> wrote:

   Hi, I mean in the proxy-log, not any request received by peer server.  Yes I checked and TLS is enabled on 5061 port. 
  Regards, H. Yavari 
     From: Daniel Grotti <dgrotti at sipwise.com>

 Hi,
  What do you mean no message received on the peer?
  Did you enable TLS on your server in config.yml?

  What does the kamailio-lb.log say?

  DanielOn 17 Jan 2015 13:08, H Yavari <hyavari at rocketmail.com> wrote:
  >
  > Hi,
  >
  > I want to create a trunk between 2 CPE in the internet over  TLS, and only one of them has static ip address. I checked  config.yml too and TLS is enabled on both server.
  > So I defined an peer server with TLS protocol over port 5061 in  that server that has dynamic ip. But when I make a call on  this server, not any request received in the other Server.  (Everything is ok over UDP )
  >
  > How can I solve this ? Should I defined any peer on the  other Server? 
  >
  >
  >
  > Regards,
  > H. Yavari

 _______________________________________________
 Spce-user mailing list
 Spce-user at lists.sipwise.com
 https://lists.sipwise.com/listinfo/spce-user

 _______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user

 _______________________________________________
 Spce-user mailing list
 Spce-user at lists.sipwise.com
 https://lists.sipwise.com/listinfo/spce-user

 _______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user

_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150120/194563a8/attachment-0001.html>