[Spce-user] No audio for Voicebox mr3.8.1
Crexpedio Support Team
jesse at crexpedio.com
Sat Jun 6 19:54:12 EDT 2015
I’ve been googling for the past few hours and still can’t find a reasonable answer.
FYI I haven’t run the audio codes workaround as I did this once and server crashed: 5.5.1. Audiocodes devices workaround <https://www.sipwise.org/doc/mr3.8.1/spce/ar01s05.html#_audiocodes_devices_workaround>
Also I initially had the subscriber set to
transport_protocol Media transport protocol
RTP/SAVP (encrypted SRTP)
But I changed this to Transparent for the sake of testing with the same result.
I’m at a loss with ideas, any input is very much appreciated.
Thanxs,
Crexpedio Technical Support Team
support at crexpedio.com
-----------------------------------------
The box Said "For windows 95, 2000. XP or Better"
so I installed Linux
> On Jun 6, 2015, at 4:08 PM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>
> Ah OK, its the advertised_IP.
> Strange, need to check then.
>
>
> On Jun 6, 2015 11:55 PM, Crexpedio Support Team <jesse at crexpedio.com> wrote:
>>
>> I haven’t modified it either so I am assuming it’s default, here is the config
>>
>>
>> less /etc/ngcp-config/network.yml
>>
>> ---
>> hosts:
>> self:
>> dbnode: 1
>> eth0:
>> advertised_ip:
>> - 54.83.27.120
>> ip: 10.237.162.56
>> netmask: 255.255.255.0
>> type:
>> - web_ext
>> - sip_ext
>> - rtp_ext
>> - web_int
>> - ssh_ext
>> interfaces:
>> - lo
>> - eth0
>> lo:
>> cluster_sets:
>> - default
>> ip: 127.0.0.1
>> netmask: 255.255.255.0
>> shared_ip: []
>> shared_v6ip: []
>> type:
>> - sip_int
>> - ha_int
>> - aux_ext
>> - ssh_ext
>> v6ip: '::1'
>> role:
>> - proxy
>> - lb
>> - mgmt
>> - rtp
>> - db
>>
>>
>>
>> Thanxs,
>>
>> Crexpedio Technical Support Team
>> support at crexpedio.com
>>
>> -----------------------------------------
>> The box Said "For windows 95, 2000. XP or Better"
>> so I installed Linux
>>
>>
>>
>>
>>
>>> On Jun 6, 2015, at 3:51 PM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>>>
>>> What's that ! Symbol between those ips in interface field?
>>> Looks something wrong in your network.yml ?a typo maybe?
>>>
>>> On Jun 6, 2015 11:43 PM, Crexpedio Support Team <jesse at crexpedio.com> wrote:
>>>>
>>>> Thank you Daniel,
>>>>
>>>> I have not modified any of these settings, below is the config:
>>>>
>>>> RUN_RTPENGINE=yes
>>>> #LISTEN_UDP=127.0.0.1:2222
>>>> LISTEN_NG=127.0.0.1:2223
>>>> INTERFACES="ext/10.237.162.56!54.83.27.120"
>>>> TIMEOUT=60
>>>> SILENT_TIMEOUT=3600
>>>> PIDFILE=/var/run/ngcp-rtpengine-daemon.pid
>>>> FORK=yes
>>>> TOS=184
>>>> TABLE=0
>>>> PORT_MIN=30000
>>>> PORT_MAX=40000
>>>> B2B_URL=http://%%:8090/
>>>> NO_FALLBACK=no
>>>> LOG_LEVEL=6
>>>>
>>>>
>>>>
>>>> here is a tcpdump capture: (This sipwise install is running on the Amazon Cloud) I am attaching useful network info as well.
>>>>
>>>> eth0 Link encap:Ethernet HWaddr 22:00:0b:b2:24:6d
>>>> inet addr:10.237.162.56 Bcast:10.237.162.255 Mask:255.255.255.0
>>>> inet6 addr: fe80::2000:bff:feb2:246d/64 Scope:Link
>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>>> RX packets:26451 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:8955 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:1000
>>>> RX bytes:4905781 (4.6 MiB) TX bytes:9751050 (9.2 MiB)
>>>>
>>>> lo Link encap:Local Loopback
>>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>>> inet6 addr: ::1/128 Scope:Host
>>>> UP LOOPBACK RUNNING MTU:65536 Metric:1
>>>> RX packets:57998 errors:0 dropped:0 overruns:0 frame:0
>>>> TX packets:57998 errors:0 dropped:0 overruns:0 carrier:0
>>>> collisions:0 txqueuelen:0
>>>> RX bytes:12892590 (12.2 MiB) TX bytes:12892590 (12.2 MiB)
>>>>
>>>> root at secure:/home/admin# curl -s checkip.dyndns.org | sed -e 's/.*Current IP Address: //' -e 's/<.*$//'
>>>> 54.83.27.120
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> root at secure:/home/admin# tcpdump -nqt -s0 -A port 5060
>>>> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
>>>> listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
>>>> IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 991
>>>> E...r... at ..l
>>>> ..8.......D...%NOTIFY sip:83031234 at 192.168.1.2:52410;ob SIP/2.0
>>>> Record-Route: <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on>
>>>> Record-Route: <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on>
>>>> Max-Forwards: 69
>>>> Via: SIP/2.0/UDP 54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
>>>> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0
>>>> Via: SIP/2.0/UDP 127.0.0.1:5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;rport=5081;alias'
>>>> To: <sip:83031234 at 127.0.0.1:5062>
>>>> From: <sip:voicebox at voicebox.sipwise.local>;tag=4711
>>>> CSeq: 1 NOTIFY
>>>> Call-Id: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local
>>>> Event: message-summary
>>>> User-Agent: Sipwise NGCP Application Server 3.X
>>>> Content-Type: application/simple-message-summary
>>>> Content-Length: 42
>>>> Contact: <sip:ngcp-lb at 54.83.27.120:5080;ngcpct=7369703a3132372e302e302e313a35303730>
>>>>
>>>> Messages-Waiting: no
>>>> Voice-Message: 0/0
>>>>
>>>> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 2
>>>> E...I3..$..o....
>>>> ..8.D...
>>>> ..
>>>>
>>>> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 750
>>>> E..
>>>> ....".......
>>>> ..8.D....B.SIP/2.0 200 OK
>>>> Via: SIP/2.0/UDP 54.83.27.120;received=54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
>>>> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0
>>>> Via: SIP/2.0/UDP 127.0.0.1:5081;rport=5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;alias'
>>>> Record-Route: <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711>
>>>> Record-Route: <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711>
>>>> Call-ID: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local
>>>> From: <sip:voicebox at voicebox.sipwise.local>;tag=4711
>>>> To: <sip:83031234 at 127.0.0.1>;tag=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
>>>> CSeq: 1 NOTIFY
>>>> Content-Length: 0
>>>>
>>>>
>>>> IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 671
>>>> E...w... at ...
>>>> ..8.......D....OPTIONS sip:83031234 at 192.168.1.2:52410;ob SIP/2.0
>>>> Max-Forwards: 70
>>>> Record-Route: <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on>
>>>> Record-Route: <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on>
>>>> Via: SIP/2.0/UDP 54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0
>>>> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0
>>>> From: sip:pinger at sipwise.local;tag=uloc-55734157-ea7-2-c485a0b8-4f936477
>>>> To: sip:83031234 at 192.168.1.2:52410;ob
>>>> Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1
>>>> CSeq: 1 OPTIONS
>>>> Content-Length: 0
>>>>
>>>>
>>>> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 1086
>>>> E..Z. at ..#.A&....
>>>> ..8.D...F..SIP/2.0 200 OK
>>>> Via: SIP/2.0/UDP 54.83.27.120;received=54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0
>>>> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0
>>>> Record-Route: <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477>
>>>> Record-Route: <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477>
>>>> Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1
>>>> From: <sip:pinger at sipwise.local>;tag=uloc-55734157-ea7-2-c485a0b8-4f936477
>>>> To: <sip:83031234 at 192.168.1.2>;tag=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0;ob
>>>> CSeq: 1 OPTIONS
>>>> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, OPTIONS
>>>> Accept: application/sdp, application/pidf+xml, application/xpidf+xml, application/simple-message-summary, message/sipfrag;version=2.0, application/im-iscomposing+xml, text/plain
>>>> Supported: replaces, 100rel, timer, norefersub
>>>> Allow-Events: presence, message-summary, refer
>>>> User-Agent: Telephone 1.1.4
>>>> Content-Length: 0
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Thanxs,
>>>>
>>>> Crexpedio Technical Support Team
>>>> support at crexpedio.com
>>>>
>>>> -----------------------------------------
>>>> The box Said "For windows 95, 2000. XP or Better"
>>>> so I installed Linux
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20150606/44979181/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2547 bytes
Desc: not available
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20150606/44979181/attachment.p7s>
More information about the Spce-user
mailing list