[Spce-user] New Community Install
Atlanta Man
axxtel_man at yahoo.com
Wed Nov 4 10:50:06 EST 2015
Hi Alex,
Thanks for your response.
I did try the VMWare Image first, actually. First I added it to the inventory using the .vmx file. When I tried starting it reported an unsupported disk file definition. Then I created a new machine using the disk drive. (several attempts). The system would abort for reasons I have not been able to determine. One issue is my VM environment does not have a DHCP server defined. I set the IP statically after the system starts. I then enter commands to stop the firewall. After that the system aborts. I'm puzzled!
On Wednesday, November 4, 2015 9:53 AM, Henry L. Jones <henryjones at axxtel.com> wrote:
Hi Michael,
Thanks for your response.
I am running VMWare ESXi 6.0.0 on a Dell PowerEdge R710 server. The new VM for SIPWise was defined as 2 cpus with 2
cores, 2 gb memory, 2 NIC cards, Debian x64 with 60gb hard drive. The drive was defined new and not initialized. The ISO was installed on a fresh VM. I used the LSI Logic Parallel SCSI controller for the virtual disk.
Thanks
On Wed, Nov 4, 2015 at 8:22 AM, Michael Prokop <mprokop at sipwise.com> wrote:
* Henry L. Jones [Tue Nov 03, 2015 at 12:22:25PM -0500]:
> Is anyone having issues when installing SipWise from the iso? I have tried
> versions 4.1.1 and 3.8.3. In both instances the installation completes
> successfully and the system reboots. After the reboot the system reports a
> grub error.
> Error: fd0 read error
> Error: no such disk
> Entering rescue mode ...
> grub rescue>
> When I enter a set I get:
> prefix=(ngcp-root)/boot/grub
> root=ngcp-root
> When I enter ls I get:
> (hd0) (fd0)
You should also see (hd0,msdos1) + (ngcp-root).
> I am installing on a VM environment with a definition of 2 cpus with 2
> cores, 2 gb memory, 2 NIC cards, Debian x64 with 60gb hard drive.
What virtual environment is that? And what type of disks/controller
is in use for the hard drive? Was there something else installed
previously on those disks?
regards,
-mika-
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20151104/ef2c4fa6/attachment-0001.html>
More information about the Spce-user
mailing list