[Spce-user] R: info on call routing
Raúl Alexis Betancor Santana
rabs at dimension-virtual.com
Tue Oct 6 18:59:28 EDT 2015
Alessandro, trust me ... if they beging forcing you to work that way ... no matter how good your commercial deal it's ... that's only the first a of a huge, huge list of problems that will come later. ANY SERIUOS WHOLESALE PROVIDER works that way ... ANY, trust me ... I had worked with the biggest (and they are the lest friendly ones) carriers, and all that sounds like they are poorly tech oriented.
----- Mensaje original -----
> De: "Alessandro Bolletta" <alessandro at mediaspot.net>
> Para: "Daniel Grotti" <dgrotti at sipwise.com>, "Raúl Alexis Betancor Santana" <rabs at dimension-virtual.com>
> CC: "spce-user" <spce-user at lists.sipwise.com>
> Enviados: Miércoles, 7 de Octubre 2015 0:07:12
> Asunto: R: [Spce-user] info on call routing
> Hi guys,
> you're right, this is a very uglyish way of providing a wholesale
> "carrier-grade" service, but for some commecial reasons I'm such locked to
> However, fyi, I could get them working with a middle Freeswitch proxy,
> configured by hand.
> It was such as a self-defeating satisfaction.
> -----Messaggio originale-----
> Da: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] Per conto di Daniel
> Inviato: mercoledì 23 settembre 2015 20.30
> A: Raúl Alexis Betancor Santana <rabs at dimension-virtual.com>
> Cc: spce-user <spce-user at lists.sipwise.com>
> Oggetto: Re: [Spce-user] info on call routing
> Agree with Raul Alessandro, as I told you in private, this is ridiculous. Change
> On Sep 23, 2015 7:57 PM, Raúl Alexis Betancor Santana
> <rabs at dimension-virtual.com> wrote:
>> First of all ... CHANGE CARRIER ... if a SIP Carrier works like that ... they
>> are full-bullshit.
>> From than on ...
>> For outbound routing, you will have to define your carrier as a new peer for
>> every DID they give you (a non-sence setup, from my point of view), then on
>> each peer, set the remote autentication options. Also on the routing rules, you
>> will have to take into account to witch peer you must send each outgoing call,
>> based on the DID they allow you.
>> Also, if they force you to 'register' each SIP account to get inbound calls ...
>> you have to set the SEMS related part for that, on the SPCE manual you have the
>> instructions to do that.
>> For incoming routing, nothing extrange must be done ... just assing your DID to
>> your subscribers, as always.
>> Lot of work to setup and mantain ... non viable proyect (from my point
>> of view) if you are a mid-side ITSP
>> Best regards
>> ----- Mensaje original -----
>> > De: "Alessandro Bolletta" <alessandro at mediaspot.net>
>> > Para: "spce-user" <spce-user at lists.sipwise.com>
>> > Enviados: Miércoles, 23 de Septiembre 2015 14:49:03
>> > Asunto: [Spce-user] info on call routing
>> > Hi,
>> > I'm trying to manage this scenario in Sipwise: my new SIP carrier
>> > can't give me a unique SIP trunk in which sending/receiving every
>> > call, as for other carriers, but he can only manage my customers
>> > with a different SIP account for every geographical number.
>> > So, how could I manage outbound and inbound call routings in a
>> > scenario like this?
>> > Cheers,
>> > --
>> > Alessandro Bolletta
>> > Mediaspot Srl
>> > _______________________________________________
>> > Spce-user mailing list
>> > Spce-user at lists.sipwise.com
>> > https://lists.sipwise.com/listinfo/spce-user
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
> Spce-user mailing list
> Spce-user at lists.sipwise.com
More information about the Spce-user