[Spce-user] Inbound call from Peer problem

[xylo p]

 I checked with provider  they are using  RFC2833   is there any
workaoruond?
thanks


On Thu, Dec 15, 2016 at 9:58 PM Andrew Pogrebennyk <apogrebennyk at sipwise.com>
wrote:

> Hi,
>
> xylo p wrote:
>
> Andrew,
> You might be right. Unfortunately not sure how to create empty domain. I
> set only IP addresses from provider but same result.  Please see below
> sample  of  my log
>
> I was saying that if you have a domain with FQDN and provider is sending
> INVITE with an IP Request-line you should create additionally domain with
> that IP.
> But that is not your case. Now it is much more clear with the log you've
> provided. The problem here is that the Request-line does not have the
> number:
>
>
> ---------------------------------------------------------------------------------------------------------------------
>
> Dec 15 14:42:46 ip-142-41-24-55 proxy[2444]: NOTICE: <script>: New request
> on proxy - M=INVITE R=sip:45.156.145.45:5060;transport=udp F=
> sip:41654442958 at 189.28.112.214 T=sip:340416400629 at 189.28.112.214:5060 I
>
> it should be
> INVITE sip:340416400629 at 45.156.145.45:5060
> and not INVITE sip:45.156.145.45:5060
> Basically the preferred way would be to talk to the provider and ask them
> why they are sending this not according to rfc3261.
> I remember someone reported this on the mailing list before, and maybe
> even somebody came up with a workaround in kamailio config so someone could
> chime in or you can try to find that, but this is really not ours but a
> provider's problem.
>
> Regards,
> Andrew
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20161216/292f738f/attachment-0001.html>