[Spce-user] Subscriber VM

Kurt McClean Sr. kurtsr at outlook.com
Fri Jan 22 11:41:34 EST 2016


>Bill..
My Router is Buffalo WZR-HP-AG300H
, DD-WRT, it has SIP Proxy setting, but its Disabled.

Also, I started an instance on AWS Amazon to see if it would work, but the same issue exist - No Audio.
same ports are forwarded.

Date: Fri, 22 Jan 2016 08:22:33 -0800
From: wfulton at thirdhatch.com
To: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Subscriber VM

What kind of router are you using?  I have seen cases where the router is passing the right ports but may not be using consistent NAT and will cause this loss of audio through the firewall issue. The first place to look would be to see if the router support consistent NAT.  Also, be sure it isn’t performing any kind of VOIP proxying.  Often this is called SIP-ALG. Good luck!Bill From: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Kurt McClean Sr.
Sent: Friday, January 22, 2016 7:00 AM
To: Spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Subscriber VM Still have not found a resolution for this issue ...

No Audio - I get Audio Only when the Softphone is on the same LAN as SPCE.
When I take the Soft phone off LAN to a public network, I connect ( register) okay, When I dial 2000 ( VM) I get no audio
also calling another subscriber, still no Audio.

I have my Router ports forwarded to the SPCE ,  (TCP)5060, 443, 1080, 2443 (UDP5060, 10000-20000To: spce-user at lists.sipwise.com
From: dgrotti at sipwise.com
Date: Wed, 20 Jan 2016 10:26:32 +0100
Subject: Re: [Spce-user] Subscriber VM

Hi,
make sure your client is using a PCMA codec, otherwise Asterisk cannot prompt any sounds.



On 2016-01-19 23:57, Kurt McClean Sr. wrote:Hi All,

I have a new install of SPCE Mr4.1.1 , I have began the initial setup of Contacts, Domain, Subscriber, Sound sets and rewites.
I assigned the sound set to the reseller and Domain.

I register with my soft phone, dial 2000 and get dead air. no sound or anything.

what am I doing wrong?

_______________________________________________Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user -- Daniel Grotti 
VoIP Engineer Sipwise GmbH , Campus 21/Europaring F15
AT-2345 Brunn am Gebirge 
Phone:  +43(0)1 301 2032 
Email:  dgrotti at sipwise.com 
Website:  www.sipwise.com 
Particulars according Austrian Companies Code paragraph 14
"Sipwise GmbH" - Europaring F15 - 2345 Brunn am Gebirge
FN:305595f, Commercial Court Vienna, ATU64002206 
_______________________________________________ Spce-user mailing list Spce-user at lists.sipwise.com https://lists.sipwise.com/listinfo/spce-user
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20160122/ec331756/attachment.html>


More information about the Spce-user mailing list